lock FORD PROBE 1996 2.G Workshop Manual

205
*
[SV01850(ALL)05/95]
RWARNING
The cooling fan is automatic and may
come on at any time. Always disconnect
the negative terminal of the battery before
working near the fan.
*
[SV01900(ALL)03/95]
q
If you must work with the engine running,
avoid wearing loose clothing or jewelry that
could get caught in moving parts. Take
appropriate precautions with long hair.
*
[SV02000(ALL)01/95]
q
Do not work on a vehicle in an enclosed
space with the engine running, unless you are
sure you have enough ventilation.
*
[SV02100(ALL)01/95]
q
Never get under a vehicle while it is
supported by a jack only. If you must work
under a vehicle, use safety stands.
*
[SV02200(ALL)01/95]
q
Keep all lit cigarettes and other smoking
materials away from the battery and all
fuel-related parts.
*
[SV02500(ALL)03/95]
If you disconnect the battery, the engine must
ªrelearnº its idle conditions before your vehicle
will drive properly. To find out how the engine
does this, seeBatteryin this chapter.
*
[SV02700(ALL)03/95]
Working with the engine off:
[SV02750(ALL)02/95]
1. Set the parking brake fully and make sure
the gearshift is securely latched in P (Park)
(automatic transaxle) or Neutral (manual
transaxle).
*
[SV02800(ALL)03/95]
2. Remove the key from the ignition after you
turn the engine off.
*
[SV02850(ALL)03/95]
3. Block the wheels. This will prevent your
vehicle from moving unexpectedly.
File:prsvp.ex
Update:Fri Jun 23 19:33:26 1995

206
*
[SV02900(ALL)03/95]
Working with the engine on:
*
[SV03000(ALL)04/95]
1. Set the parking brake fully and make sure
the gearshift is securely latched in P (Park)
(automatic transaxle) or Neutral (manual
transaxle).
*
[SV03100(ALL)03/95]
2. Block the wheels. This will prevent your
vehicle from moving unexpectedly.
*
[SV03200(ALL)02/95]
RWARNING
Do not start your engine with the air
cleaner removed and do not remove it
while the engine is running.
%*
[SV03400(ALL)03/95]
Opening the Hood
%*
[SV03500(ALL)01/95]
1. Inside the vehicle, pull the hood release
handle located under the bottom left corner
of the instrument panel.
%*
[SV03600(ALL)02/95]
2. Go to the front of the vehicle and release the
auxiliary latch that is located under the hood
at the center of the vehicle.
[SV03750(ALL)01/95]
3. Lift the hood and set the prop rod in the
hole in the hood marked with an arrow.
*
[SV03800(ALL)11/90]
When you close the hood, make sure the prop
rod is in its retainer and that the hood latches
securely.
File:prsvp.ex
Update:Fri Jun 23 19:33:26 1995

210 %
*
[SV05600(ALL)04/95]
Cleaning the Engine
*
[SV05610(ALL)04/95]
A clean engine is more efficient because the
engine is able to cool properly. A build up of
grease and dirt acts as an insulator, keeping the
engine warmer than normal.
*
[SV05620(ALL)05/95]
q
Extreme care must be used if a power washer
is used to clean the engine. The high pressure
fluid could penetrate sealed parts and
assemblies causing damage or malfunctions.
*
[SV05630(ALL)04/95]
q
In order to avoid possible cracking of the
engine block or fuel injection pump, do not
spray a hot engine or injection pump with
cold water.
*
[SV05640(ALL)06/95]
q
The alternator, distributor and air intake must
be covered. Covering these components will
help prevent water damage.
*
[SV05650(ALL)04/95]
Never wash or rinse the engine while it is
running. Water getting into the engine may
cause internal damage.
*
[SV06100(ALL)03/95]
Filling the Fuel Tank
[SV06200(ALL)03/90]
Fuel filler door release lever
[SV06300(ALL)11/91]
Your vehicle is equipped with a fuel filler door
release. To open the fuel filler door, pull up on
the release lever which is located in front of the
driver's seat and near the door.
[SV06350(ALL)01/94]
Remote Fuel Filler-Lid Release Override
[SV06410(ALL)01/95]
If the release does not operate, open the
hatchback, remove the trim on the left rear side,
reach into the opening and pull the latch toward
the rear (see the service manual for trim
removal). You should wear gloves to protect
your hands from any sharp edges when you use
the fuel filler-lid release override.
File:prsvp.ex
Update:Fri Jun 23 19:33:26 1995

211 [SV06450(ALL)03/94]
half page art:0032107-C
Manual fuel filler-lid override (behind left rear trim panel
in hatch)
[SV06505(ALL)05/95]
To fill the fuel tank:
*
[SV06550(ALL)05/95]
1. After opening the fuel filler door, remove
the cap carefully and slowly by turning it
counterclockwise 1/2 to 3/4 turn.
*
[SV06650(ALL)05/95]
RWARNING
The fuel system may be under pressure. If
the fuel cap is venting vapor or if you
hear a hissing sound while disengaging
the fuel cap, wait until it stops before
completely removing the cap. Otherwise,
fuel may spray out and injure you or
others.
*
[SV06700(ALL)05/95]
2. Put the nozzle all the way inside the fuel
filler pipe before pumping the fuel.
File:prsvp.ex
Update:Fri Jun 23 19:33:26 1995

212
*
[SV06800(ALL)05/95]
NOTE: If you spill any fuel on the body of
your vehicle, clean it off immediately.
The fuel may dull or soften the paint
if you do not wash it off.
*
[SV06850(ALL)05/95]
3. Replace the fuel cap completely when you
are finished. Turn it clockwise 1/4 turn until
it is tight. It will click when it is fully
tightened.
*
[SV06875(ALL)05/95]
4. Push the fuel door closed.
[SV07545(ALL)05/95]
If you lose the fuel cap, replace it with an
authorized Motorcraft or equivalent part.
%*
[SV07550(ALL)05/95]
RWARNING
If you do not use the proper fuel cap, the
pressure in the fuel tank can damage the
fuel system or cause it to work improperly
in a collision.
*
[SV07560(ALL)05/95]
NOTE: If you replace your fuel cap with an
aftermarket fuel filler cap, the customer
warranty may be void for any damage
to the fuel tank and/or fuel system.
%*
[SV07670(ALL)05/95]
Choosing the Right Fuel
*
[SV07680(ALL)05/95]
Use only UNLEADED FUEL in your vehicle.
Using leaded fuel is prohibited by federal law.
Your warranty may not apply if your vehicle is
damaged because you used the wrong fuel.
*
[SV07690(ALL)05/95]
Using a high-quality fuel makes your vehicle
more responsive and maintain its good fuel
economy and emissions. It should not be
necessary to add any aftermarket products to
your fuel tank if you continue to use a
high-quality fuel.
File:prsvp.ex
Update:Fri Jun 23 19:33:26 1995

224 [SV20350(ALL)05/95]2.0L Engine
*
[SV20355(ALL)03/95]
1. Before you remove the cap, turn the engine
off and let it cool. Even when the engine is
cool, be careful when you remove the
radiator cap.
*
[SV20360(ALL)05/95]
2. When the engine is cool, wrap a thick cloth
around the cap and turn it slowly
counterclockwise to the first stop.
*
[SV20370(ALL)03/95]
3. Step back while the pressure releases.
*
[SV20375(ALL)03/95]
4. When you are sure that all the pressure has
been released, use the cloth to turn and
remove cap.
*
[SV20380(ALL)03/95]
5. Stand away from the radiator opening. Hot
steam may blow out or hot engine coolant
may even splash out.
*
[SV20390(ALL)01/95]
RWARNING
Failure to follow these instructions could
result in serious personal injury from hot
engine coolant or steam blowout and/or
damage to the engine cooling system or
engine.
*
[SV20400(ALL)02/95]
Ford Premium Cooling System Fluid is an
optimized formula that will protect all metals
and rubber elastomers used in Ford engines for
four years or 50,000 miles (80,000 km). It is not
necessary and not recommended to use
supplemental coolant additives in your vehicle.
These additives may harm your engine cooling
system. Follow the recommended service interval
for changing your engine coolant.
File:prsvp.ex
Update:Fri Jun 23 19:33:26 1995

231
*
[SV24000(ALL)03/95]
Wiper blade maintenance
*
[SV24100(ALL)03/95]
Check the windshield wiper blades at least twice
a year. Also check them whenever they seem
less effective than usual. Such substances as tree
sap and some hot wax treatments used by
commercial car washes reduce the effectiveness
of wiper blades.
*
[SV24200(ALL)03/95]
If the blades do not wipe properly, clean both
the windshield and the wiper blades. Use
undiluted windshield washer solution or a mild
detergent. Rinse thoroughly with clear water. Do
not use fuel, kerosene, paint thinner, or other
solvents to clean your wiper blades. These will
damage your blades.
*
[SV24300(ALL)02/95]
To make reaching the wiper blades easy, simply
turn the ignition switch to ACC and turn your
wipers on. Wait for them to reach a vertical
position and turn the ignition to OFF. Do not
move the wipers manually. Moving the wipers
manually may damage them.
*
[SV24400(ALL)03/01]
Wiper blade replacement
*
[SV24500(ALL)01/95]
If the wipers still do not work properly after
you clean them, you may need to replace the
wiper blade assembly. When replacing the wiper
blade assembly always use a Motorcraft part or
equivalent.
*
[SV24525(ALL)10/93]
To replace the wiper blades:
*
[SV24535(ALL)04/95]
1. Pull the wiper arm away from the
windshield and lock into the service position.
*
[SV24550(ALL)03/94]
2. Turn the blade at an angle from the wiper
arm. Push the lock pin with a screwdriver to
release the blade and pull the wiper blade
down toward the windshield to remove it
from the arm.
File:prsvp.ex
Update:Fri Jun 23 19:33:26 1995

233
*
[SV25100(ALL)02/95]
q
Make sure the weight of your load is evenly
distributed.
*
[SV25200(ALL)10/89]
q
Drive at safe speeds.
*
[SV25300(ALL)01/95]
If you do not take these precautions, your tires
may fail or go flat.
*
[SV25390(ALL)06/95]
Ford Motor Company recommends obeying
posted speed limits.
*
[SV25400(ALL)05/95]
RWARNING
Driving too fast for conditions creates the
possibility of loss of vehicle control.
Driving at very high speeds for extended
periods of time may result in damage to
vehicle components.
[SV25600(ALL)03/95]
At least once a month, check the pressure in all
your vehicle's tires, including the spare. Use an
accurate tire pressure gauge. Check the tire
pressure when tires are cold, that is, after the
vehicle has been parked for at least one hour or
has been driven less than 3 miles (5 km).
[SV25700(ALL)03/94]
You can find your vehicle's proper tire inflation
pressure on the tire decal on the right door lock
pillar.
*
[SV25850(ALL)05/95]
RWARNING
Improperly inflated tires can affect vehicle
handling and can fail suddenly, possibly
resulting in loss of vehicle control.
%*
[SV25875(ALL)02/95]
Tire inspection and maintenance
*
[SV25880(ALL)02/95]
Inspect the tire treads, and remove stones, nails,
glass or other objects that may be wedged in the
tread grooves. Check for holes or cuts that may
permit air to leak from the tire, and make the
necessary repairs.
File:prsvp.ex
Update:Fri Jun 23 19:33:26 1995

257 [SV42000(ALL)01/95]
High-Mount Brakelamp Bulb
[SV42050(ALL)02/89]
To replace the bulb:
[SV42200(ALL)02/92]
1. Remove the two side trim liftgate panels.
[SV42300(ALL)02/92]
2. Remove the liftgate trim clip and the liftgate
trim.
[SV42400(ALL)02/92]
3. Remove the bulb from the socket by pushing
it in and turning it counterclockwise.
[SV42500(ALL)02/92]
4. Install the bulb by pushing straight into the
lamp socket and turning it clockwise until it
locks in place.
[SV42600(ALL)02/92]
5. Replace the liftgate trim and trim clip.
[SV42700(ALL)02/92]
6. Replace the two side trim liftgate panels.
[SV42800(ALL)04/93]
one third page art:0032061-B
High-mount brakelamp
File:prsvp.ex
Update:Fri Jun 23 19:33:26 1995

258 [SV42900(ALL)01/95]Rear Lamp Bulbs
[SV43000(ALL)04/93]
To replace a bulb:
[SV43100(ALL)04/93]
1. Remove the attaching screw and the rear
lens cover.
[SV43200(ALL)04/93]
one third page art:0032120-A
Removing the attaching screw and lens
[SV43300(ALL)04/93]
2. Partially remove the rear lens by pulling the
lock tabs out of the slots.
File:prsvp.ex
Update:Fri Jun 23 19:33:26 1995