engine FORD S-MAX 2006 Service Repair Manual

37. \f
38. Refer\fto:\fClutch\fSystem\fBleeding\f(308-00,\fGener\bl\fProcedures).\f
39. Refer\fto:\f Cooling\fSystem\fDr\bining,\fFilling\f\bnd\f
Bl e

eding \f(303-03F\fEngine\fCooling\f-\f2.2L\f
Dur

\btorq-TDCi\f(129kW/175PS)\f-\fDW,\fGener\bl\f
Procedures).\f
40. \f
41. \f
42. Refer\fto:\f B\bttery\f(414-01\fB\bttery,\fMounting\f\bnd\f
C\bb l

es,\fRemov\bl\f\bnd\fInst\bll\btion).\f
Refer\fto:\f Wheel\f\bnd\fTire\f(204-04\fWheels\f\bnd\f
Tir

es,\fRemov\bl\f\bnd\fInst\bll\btion).\f
Refer\fto:\f Door\fWindow\fMotor\fIniti\bliz\btion \f(501-
11\f

Gl\bss,\fFr\bmes\f\bnd\fMech\bnisms,\fGener\bl\f
Procedures).\f
\f\f
\f\f
\f\f
\f\f
Стр. 8 из
8
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G1043368&gu...procarmanuals.com
http://vnx.su

Engine - \b.\bL D\fratorq-TDCi
(1\b9kW/175PS) - DW - Engine AccessoriesS-MAX/G\bl\bxy\f2006.5\f(02/2006
\fPrint
Installation
Special Tool(s)
205-044-01\f
Ad\bpter\ffor\f205-044\f
303-122\f
Lifting\fBr\bcket,\fEngine\f
303-1270\f
Timing\fPin,\fCr\bnksh\bft\f
303-1277\f
Timing\fPin,\fC\bmsh\bft\f
303-254\f
Locking\fTool,\fFlywheel\f
303-435\f
Mounting\fSt\bnd\f
303-435-06\f
Mounting\fBr\bcket\ffor\f303-435\f
303-435-11B\f
Mounting\fPl\bte\ffor\f303-435-06
\f
\f
\f
\f
\f
\f
\f
\f
Стр. 1 из 17
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G1043369&gu...procarmanuals.com
http://vnx.su

Engine C\b\bling - 2\f0L Duratec-HE
(107kW/145PS) - MI4/2\f0L Duratec-HE
Flex Fuel (107kW/145PS) - MI4/2\f3L
Duratec-HE (118kW/160PS) - MI4 -
Specificati\bns
S-MAX/G\bl\bxy\f2006.5\f(02/2006-)\fPrint \f
Lubricants, Fluids, Sealers and Adhesives
Antifreeze
C\b\bling System Refill Capacity - Vehicles with 2\f0L Duratec-HE (MI4) engine
C\b\bling System Refill Capacity - Vehicles with 2\f3L Duratec-HE (MI4) engine
C\b\bling System Pressure Specificati\bn
ItemSpec\bf\bcat\bo\f
Motorcr\bft\fSuper\fPlus\fAntifreezeWSS-M97B44–D
Spec\bf\bc Grav\bty (prov\bd\b\fg \fo
other add\bt\bve \bs \b\f coola\ft)Approx\bmate perce\ftage of A\ft\b-Freeze (by volume)Rema\b\fs Flu\bd toSol\bd\bf\bes at
1.061\f\bt\f+15°C50%–25°C\f(–13° F)–37°C\f(–35°F)
Descr\bpt\bo\fL\bters
Cooling\fsystem\f\bnd\fhe\bter6.2
Descr\bpt\bo\fL\bters
Cooling\fsystem\f\bnd\fhe\bter6.9
Descr\bpt\bo\fPressure kpa (ps\b)
R\bdi\btor\fpressure\ftest138\f(20)
Cool\bnt\fexp\bnsion\ft\bnk\fc\bp\frele\bse\fpressure135\fto\f155\f(19.6\fto\f22.5)
Стр. 1 из 1
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G506747&gui...procarmanuals.com
http://vnx.su

Engine C\b\bling - 2\f0L Duratec-HE
(107kW/145PS) - MI4/2\f0L Duratec-HE
Flex Fuel (107kW/145PS) - MI4/2\f3L
Duratec-HE (118kW/160PS) - MI4 -
Engine C\b\bling
S-MAX/G\bl\bxy\f2006.5\f(02/2006-)\fPrint \f
Descripti\bn and Operati\bn
\f\f
Descripti\bn
Cool\bnt\fexp\bnsion\ft\bnk\f
Cool\bnt\foutlet\fconnector\f
Cooling\ff\bn\fmotor\f\bnd\fshroud\f
R\bdi\btor\f
Thermost\bt\fhousing\f
Cool\bnt\fpump\f
CAUTION:\fIf\fthe\fcool\bnt\fconcentr\btion\fis\finsufficient,\flow\ftemper\bture\fprotection\f\bnd\f
co

rrosion\fresist\bnce\fwill\fbe\fimp\bired.\f
NOTE:\fProviding\fthe\fcool\bnt\fh\bs\fnot\fbeen\fcont\bmin\bted\fwith\fother\ffluids\for\fforeign\f
m\bteri\bl,\fthe\frobust\fcorrosion\fresist\bnce\fproperties\fof\fthis\fcool\bnt\fme\bns\fth\bt\fit\fc\bn\fbe\f
reused\f\bfter\fch\bnging\f\bn\f\bluminum\fcooling\fsystem\fcomponent.\fThe\fconcentr\btion\fshould\f
\blw\bys\fbe\fchecked\f\bnd\fm\bint\bined\fwithin\fthe\fspecific\btion.\f\f
Cool\bnt\fconcentr\btion\fshould\fbe\fchecked\fthrough\fthe\fn e
ck\fof\fthe\fcool\bnt\fexp\bnsion\ft\bnk\f
Item
1
2
3
4
5
6
\f
Part Number -
-
-
-
-
-
Стр. 1 из 2
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G544955&gui...procarmanuals.com
http://vnx.su

with\f\b\fhydrometer.\fThe\f\bccept\bble\fr\bnge\fof\fspecific\fgr\bvity\f(sg)\fmust\fbe\fm\bint\bined.\f\f
The\fcool\bnt\fused\fis\f\bn\for\bnge\fcolored\fMotorcr\bft\fSuper\fPlus\f2000\fengine\fcool\bnt.\fThis\fis\f\b\f
non\fsilic\bted\forg\bnic\f\bcid\ftechnology\f(OAT)\fcool\bnt\fth\bt\fmust\fnot\fbe\fmixed\fwith\fother\f
cool\bnt\ftypes.\fFor\fcooling\fsystem\ftop\fup,\fonly\fuse\fcool\bnt\fwhich\fmeets\fthe\fcorrect\f
specific\btion.\f
Стр. 2 из 2
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G544955&gui...procarmanuals.com
http://vnx.su

Engine C\b\bling - 2\f0L Duratec-HE
(107kW/145PS) - MI4/2\f0L Duratec-HE
Flex Fuel (107kW/145PS) - MI4/2\f3L
Duratec-HE (118kW/160PS) - MI4 -
Engine C\b\bling
S-MAX/G\bl\bxy\f2006.5\f(02/2006-)\fPrint \f
Diagn\bsis and Testing
Special T\b\bl(s)
Gen

eral Equipment
Inspecti\bn and Verificati\bn 1. 1\f
Verify\fthe\fcustomer\fconcern.\f
2

. 2\f
Visu\blly\finspect\ffor\fobvious\fsigns\fof\fmech\bnic\bl\for\felectric\bl\fd\bm\bge.\f
V

isual Inspecti\bn Chart
3. 3\f
If\f\bn\fobvious\fc\buse\ffor\f\bn\fobserved\for\freported\fconcern\fis\ffound,\fcorrect\fthe\fc\buse\f
(if\fpossible)\fbefore\fproceeding\fto\fthe\fnext\fstep\f
4. 4\f
If\fthe\fc\buse\fis\fnot\fvisu\blly\fevident,\fverify\fthe\fsymptom\f\bnd\frefer\fto\fthe\fSymptom\f
C
h\brt.\f
Sympt\bm Chart
Pressure\fTester,\fCooling\fSystem\f
303-396\f(24-001\fA)\f
Ad\bptor\ffor\f303-396\f
303-396-09\f
Ford\f\bpproved\fdi\bgnostic\ftool
Mechanica\bE\bectrica\b

Cool\bnt\fle\bk(s)\f\f

G\bsket(s)\for\fse\bl(s)\f\f

Hose(s)\for\fhose\fjoints\f\f

Cool\bnt\fexp\bnsion\ft\bnk\fc\bp\f\bnd\fse\bl\f
\f

Cool\bnt\fexp\bnsion\ft\bnk\f\f

R\bdi\btor\f\f

Cool\bnt\fpump\f\f

Thermost\bt\fhousing\f\f

He\bter\fcore\f\f

Accessory\fdrive\fbelt\f\f

Cool\bnt\foutlet\fconnector\f

Fuse(s)\f\f

Wiring\fh\brness\f\f

Electric\bl\fconnector(s)\f\f

Engine\fcool\bnt\ftemper\bture\f(ECT)\fsensor\f
\f

Cooling\ff\bn\f\f

Powertr\bin\fcontrol\fmodule\f(PCM)\f
\fymptomPossib\be \fourcesAction
Loss\fof\fcool\bntHose(s)\for\f
hose\fjoint(s).\f
*INSPECT\fthe\fhoses\f\bnd\fhose\fjoints.\fINSTALL\f\b\fnew\f
hose(s)\f\bs\fnecess\bry.\f
*
R\bdi\btor.\f
*INSPECT\fthe\fr\bdi\btor\ffor\fle\bks.\fCARRY\fOUT\fthe\f
Pressure\fTest\fComponent\fTest\fin\fthis\fsection.\fINSTALL\f
\b\fnew\fr\bdi\btor\f\bs\fnecess\bry.\f\f
*
\f
\f
Стр. 1 из
8
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G165301&gui...procarmanuals.com
http://vnx.su

REFER\fto:\fR\bdi\btor\f(303-03A\fEngine\fCooling\f-\f2.0L\f
Dur
\btec-HE\f(107kW/145PS)\f-\fMI4/2.0L\fDur\btec-HE\f
Flex\fFuel\f(107kW/145PS)\f-\fMI4/2.3L\fDur\btec-HE\f
(118kW/160PS)\f-\fMI4,\fRemov\bl\f\bnd\fInst\bll\btion).\f
Cool\bnt\fpump.\f
*INSPECT\fthe\fcool\bnt\fpump\ffor\fle\bks.\fCARRY\fOUT\fthe\f
Pressure\fTest\fComponent\fTest\fin\fthis\fsection.\fINSTALL\f
\b\fnew\fcool\bnt\fpump\for\fcool\bnt\fpump\fg\bsket\f\bs\f
necess\bry.\f\f
REFER\fto:\f Cool\bnt\fPump \f(303-03A\fEngine\fCooling\f-\f
2.0

L\fDur\btec-HE\f(107kW/145PS)\f-\fMI4/2.0L\fDur\btec-
HE\fFlex\fFuel\f(107kW/145PS)\f-\fMI4/2.3L\fDur\btec-HE\f
(118kW/160PS)\f-\fMI4,\fRemov\bl\f\bnd\fInst\bll\btion).\f
*
Thermost\bt\f
housing.\f
*INSPECT\fthe\fthermost\bt\fhousing\ffor\fle\bks.\fCARRY\f
OUT\fthe\fPressure\fTest\fComponent\fTest\fin\fthis\fsection.\f
INSTALL\f\b\fnew\fthermost\bt\fhousing\f\bnd\fthermost\bt\f
housing\fg\bsket\f\bs\fnecess\bry.\f\f
REFER\fto:\f
Thermost\bt\f-\f2.0L\fDur\btec-HE\f
(10

7kW/145PS)\f-\fMI4/2.0L\fDur\btec-HE\fFlex\fFuel\f
(107kW/145PS)\f-\fMI4\f(303-03A\fEngine\fCooling\f-\f2.0L\f
Dur

\btec-HE\f(107kW/145PS)\f-\fMI4/2.0L\fDur\btec-HE\f
Flex\fFuel\f(107kW/145PS)\f-\fMI4/2.3L\fDur\btec-HE\f
(118kW/160PS)\f-\fMI4,\fRemov\bl\f\bnd\fInst\bll\btion).\f
*
Cool\bnt\f
exp\bnsion\ft\bnk\f
c\bp\for\fse\bl(s).\f
*CHECK\fthe\fcool\bnt\fexp\bnsion\ft\bnk\fc\bp\ffor\ftightness\f
\bnd\fd\bm\bge.\fINSTALL\f\b\fnew\fcool\bnt\fexp\bnsion\fc\bp\f\bs\f
necess\bry.\f
*
Cool\bnt\f
exp\bnsion\ft\bnk.
\f
*INSPECT\fthe\fcool\bnt\fexp\bnsion\ft\bnk\ffor\fd\bm\bge.\f
INSTALL\f\b\fnew\fcool\bnt\fexp\bnsion\ft\bnk\f\bs\fnecess\bry.\f
*
He\bter\fcore.\f
*CHECK\fthe\fhe\bter\fcore\ffor\fle\bks.\f
*
Engine.\f
*INSPECT\fthe\fengine,\fcylinder\fhe\bd,\fcylinder\fblock\f\bnd\f
cylinder\fhe\bd\fg\bsket.\fREFER\fto:\f
Cylinder\fHe\bd\f(303-01A\fEngine\f-\f2.0L\fDur\btec-
HE\f
(107kW/145PS)\f-\fMI4/2.0L\fDur\btec-HE\fFlex\fFuel\f
(107kW/145PS)\f-\fMI4,\fRemov\bl\f\bnd\fInst\bll\btion),
\f
Cylinder\fHe\bd\f(303-01C\fEngine\f-\f2.3L\fDur\btec-HE\f
(118kW/160PS)\f-\fMI4,\fRemov\bl\f\bnd\fInst\bll\btion).\f
*
The\fengine\f
overhe\bts\f(signs\f
of\fcool\bnt\fboiling)Cooling\fsystem\f
does\fnot\fhold\f
pressure.\f
*
INSPECT\fthe\fcool\bnt\fexp\bnsion\ft\bnk\ffor\fd\bm\bge.\f
INSTALL\f\b\fnew\fcool\bnt\fexp\bnsion\ft\bnk\f\bs\fnecess\bry.\f
INSPECT\fthe\fcool\bnt\fpump\for\fcool\bnt\fpump\fg\bsket\ffor\f
d\bm\bge.\fINSTALL\f\b\fnew\fcool\bnt\fpump\for\fcool\bnt\f
pump\fg\bsket\f\bs\fnecess\bry.\f\f
REFER\fto:\f Cool\bnt\fPump \f(303-03A\fEngine\fCooling\f-\f
2.0

L\fDur\btec-HE\f(107kW/145PS)\f-\fMI4/2.0L\fDur\btec-
HE\fFlex\fFuel\f(107kW/145PS)\f-\fMI4/2.3L\fDur\btec-HE\f
(118kW/160PS)\f-\fMI4,\fRemov\bl\f\bnd\fInst\bll\btion).\f
INSPECT\fthe\fengine,\fcylinder\fhe\bd,\fcylinder\fblock\f\bnd\f
cylinder\fhe\bd\fg\bsket.\fREFER\fto:\f Cylinder\fHe\bd\f(303-01A\fEngine\f-\f2.0L\fDur\btec-
HE\f
(107kW/145PS)\f-\fMI4/2.0L\fDur\btec-HE\fFlex\fFuel\f
(107kW/145PS)\f-\fMI4,\fRemov\bl\f\bnd\fInst\bll\btion),
\f
Cylinder\fHe\bd\f(303-01C\fEngine\f-\f2.3L\fDur\btec-HE\f
(118kW/160PS)\f-\fMI4,\fRemov\bl\f\bnd\fInst\bll\btion).\f
*
*
*
Air\fin\fcooling\f
system.\f
*BLEED\fthe\fcooling\fsystem.\f\f
REFER\fto:\f Cooling\fSystem\fDr\bining,\fFilling\f\bnd\f
Ble

eding \f(303-03A\fEngine\fCooling\f-\f2.0L\fDur\btec-HE\f
(10

7kW/145PS)\f-\fMI4/2.0L\fDur\btec-HE\fFlex\fFuel\f
(107kW/145PS)\f-\fMI4/2.3L\fDur\btec-HE\f
(118kW/160PS)\f-\fMI4,\fGener\bl\fProcedures).\f
*
Cool\bnt\f
exp\bnsion\ft\bnk\f
*CHECK\fthe\fcool\bnt\fexp\bnsion\ft\bnk\fc\bp\ffor\ftightness\f
\bnd\fd\bm\bge.\fINSTALL\f\b\fnew\fcool\bnt\fexp\bnsion\fc\bp\f\bs\f
*
Стр. 2 из
8
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G165301&gui...procarmanuals.com
http://vnx.su

c\bp\for\fse\bl(s).\fnecess\bry.\f
Cool\bnt\f
exp\bnsion\ft\bnk.
\f
*INSPECT\fthe\fcool\bnt\fexp\bnsion\ft\bnk\ffor\fd\bm\bge.\f
INSTALL\f\b\fnew\fcool\bnt\fexp\bnsion\ft\bnk\f\bs\fnecess\bry.\f
*
Cool\bnt\flevel\for\f
condition.\f
*
CHECK\fthe\fcool\bnt\flevel.\fREFILL\fthe\fcooling\fsystem\f\bs\f
necess\bry.\f\f
REFER\fto:\f
Cooling\fSystem\fDr\bining,\fFilling\f\bnd\f
Ble

eding \f(303-03A\fEngine\fCooling\f-\f2.0L\fDur\btec-HE\f
(10

7kW/145PS)\f-\fMI4/2.0L\fDur\btec-HE\fFlex\fFuel\f
(107kW/145PS)\f-\fMI4/2.3L\fDur\btec-HE\f
(118kW/160PS)\f-\fMI4,\fGener\bl\fProcedures).\f CHECK\fthe\fcool\bnt\fcondition.\fIf\fthe\fcool\bnt\fis\fin\fpoor\f
condition\fdr\bin\f\bnd\frefill\fwith\fnew\fcool\bnt.\f\f
REFER\fto:\f Cooling\fSystem\fDr\bining,\fFilling\f\bnd\f
Bl e

eding \f(303-03A\fEngine\fCooling\f-\f2.0L\fDur\btec-HE\f
(10

7kW/145PS)\f-\fMI4/2.0L\fDur\btec-HE\fFlex\fFuel\f
(107kW/145PS)\f-\fMI4/2.3L\fDur\btec-HE\f
(118kW/160PS)\f-\fMI4,\fGener\bl\fProcedures).\f
*
*
Cool\bnt\f
concentr\btion.\f
*REFER\fto:\f
Specific\btions \f(303-03A\fEngine\fCooling\f-\f
2.0
L\fDur\btec-HE\f(107kW/145PS)\f-\fMI4/2.0L\fDur\btec-
HE\fFlex\fFuel\f(107kW/145PS)\f-\fMI4/2.3L\fDur\btec-HE\f
(118kW/160PS)\f-\fMI4,\fSpecific\btions).\f
*
R\bdi\btor\fgrille.\f
*INSPECT\fthe\fr\bdi\btor\fgrille\ffor\f\bir\frestrictions\for\f
d\bm\bge.\fREPAIR\for\fINSTALL\fnew\fp\brts\f\bs\fnecess\bry.\f
*
Cool\bnt\fpump.\f
*CARRY\fOUT\fthe\fPressure\fTest\fComponent\fTest\fin\fthis\f
section.\fINSPECT\fthe\fcool\bnt\fpump\ffor\fle\bks.\fINSTALL\f
\b\fnew\fcool\bnt\fpump\for\fcool\bnt\fpump\fg\bsket\f\bs\f
necess\bry.\f\f
REFER\fto:\f Cool\bnt\fPump \f(303-03A\fEngine\fCooling\f-\f
2.0

L\fDur\btec-HE\f(107kW/145PS)\f-\fMI4/2.0L\fDur\btec-
HE\fFlex\fFuel\f(107kW/145PS)\f-\fMI4/2.3L\fDur\btec-HE\f
(118kW/160PS)\f-\fMI4,\fRemov\bl\f\bnd\fInst\bll\btion).\f
*
Thermost\bt.\f
*CARRY\fOUT\fthe\fThermost\bt\fTest\fComponent\fTest\fin\f
this\fsection.\fINSTALL\f\b\fnew\fthermost\bt\fhousing\f\bnd\f
thermost\bt\fhousing\fg\bsket\f\bs\fnecess\bry.\f\f
REFER\fto:\f Thermost\bt\f-\f2.0L\fDur\btec-HE\f
(1 0

7kW/145PS)\f-\fMI4/2.0L\fDur\btec-HE\fFlex\fFuel\f
(107kW/145PS)\f-\fMI4\f(303-03A\fEngine\fCooling\f-\f2.0L\f
Dur

\btec-HE\f(107kW/145PS)\f-\fMI4/2.0L\fDur\btec-HE\f
Flex\fFuel\f(107kW/145PS)\f-\fMI4/2.3L\fDur\btec-HE\f
(118kW/160PS)\f-\fMI4,\fRemov\bl\f\bnd\fInst\bll\btion).\f
*
Accessory\fdrive\f
belt.\f
*
CHECK\fthe\fcondition\fof\fthe\f\bccessory\fdrive\fbelt.\f
REFER\fto:\f Accessory\fDrive \f(303-05A\fAccessory\fDrive\f-\f2.0L\f
Dur

\btec-HE\f(107kW/145PS)\f-\fMI4/2.0L\fDur\btec-
HE\fFlex\fFuel\f(107kW/145PS)\f-\fMI4/2.3L\fDur\btec-
HE\f(118kW/160PS)\f-\fMI4,\fDi\bgnosis\f\bnd\fTesting),
\f
Accessory\fDrive \f(303-05C\fAccessory\fDrive\f-\f2.5L\f
Dur
\btec\f(162kW/220PS)\f-\fVI5,\fDi\bgnosis\f\bnd\f
Testing).\f
*
Cooling\ff\bn.\f
*CHECK\fthe\foper\btion\fof\fthe\fcooling\ff\bn.\fREFER\fto\fthe\f
Ford\f\bpproved\fdi\bgnostic\ftool.\f
*
Engine.\f
*INSPECT\fthe\fengine,\fcylinder\fhe\bd,\fcylinder\fblock\f\bnd\f
cylinder\fhe\bd\fg\bsket.\fREFER\fto:\f
Cylinder\fHe\bd\f(303-01A\fEngine\f-\f2.0L\fDur\btec-
HE\f
(107kW/145PS)\f-\fMI4/2.0L\fDur\btec-HE\fFlex\fFuel\f
(107kW/145PS)\f-\fMI4,\fRemov\bl\f\bnd\fInst\bll\btion),
\f
Cylinder\fHe\bd\f(303-01C\fEngine\f-\f2.3L\fDur\btec-HE\f
(118kW/160PS)\f-\fMI4,\fRemov\bl\f\bnd\fInst\bll\btion).\f
*
The\fengine\fdoes\fThermost\bt.\f
*CARRY\fOUT\fthe\fThermost\bt\fTest\fComponent\fTest\fin\f
*
Стр. 3 из 8
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G165301&gui...procarmanuals.com
http://vnx.su

C\bmp\bnent Tests
Pressure Test WARNING:\fWhen\frele\bsing\fthe\fcooling\fsystem\fpressure,\fcover\fthe\fcool\bnt\fexp\bnsion\f
t \b

nk\fc\bp\fwith\f\b\fthick\fcloth\fto\fprevent\fthe\fpossibility\fof\fcool\bnt\fsc\blding.\fF\bilure\fto\ffollow\f
this\finstruction\fm\by\fresult\fin\fperson\bl\finjury.\f
NOTE:\fIf\fthe\fcool\bnt\fexp\bnsion\ft\bnk\fc\bp\fis\frot\bted\fcounterclockwise\fby\f½\f\b\ffull\fturn,\fthe\f
pressurized\fcool\bnt\fwill\fbe\fvented\fto\fthe\funderside\fof\fthe\fcool\bnt\fexp\bnsion\ft\bnk\fc\bp.\f
1. 1\f
Slowly\fremove\fthe\fcool\bnt\fexp\bnsion\ft\bnk\fc\bp\fto\frele\bse\fthe\fcooling\fsystem\f
p
ressure.\f
2. 2\f
Inst\bll\fthe\fcool\bnt\fexp\bnsion\ft\bnk\fc\bp.\f
3

. 3\f
Inst\bll\fthe\fspeci\bl\ftools\f303-396\f\bnd\f303-396-09\fto\fthe\fcool\bnt\fexp\bnsion\ft\bnk.\f
4

. 4\f
Pressurize\fthe\fcooling\fsystem\fto\fthe\fcool\bnt\fexp\bnsion\ft\bnk\fc\bp\frele\bse\fpressure.\f
\f
REFER\fto:\f Specific\btions \f(303-03A\fEngine\fCooling\f-\f2.0L\fDur\btec-HE\f
(10
7kW/145PS)\f-\fMI4/2.0L\fDur\btec-HE\fFlex\fFuel\f(107kW/145PS)\f-\fMI4/2.3L\f
Dur\btec-HE\f(118kW/160PS)\f-\fMI4,\fSpecific\btions).\f
5. 5\f
Observe\fthe\fcooling\fsystem\fpressure\ftester\fg\buge\fre\bding\ffor\f\bpproxim\btely\ftwo\f
m
inutes.\fThe\fpressure\fshould\fnot\fdrop\fduring\fthis\ftime.\fIf\fthe\fcooling\fsystem\fholds\f
pressure,\fproceed\fto\fStep\f7.\fIf\fthe\fcooling\fsystem\fdoes\fnot\fhold\fpressure,\fcheck\fit\f
thoroughly\ffor\fcool\bnt\fle\bks.\f
6. 6\f
Check\fthe\fengine\ffor\fcool\bnt\fle\bks.\fDr\bin\fthe\fcooling\fsystem,\frep\bir\f\bny\fcool\bnt\f
l
e\bks\ffound\f\bnd\ffill\f\bnd\fbleed\fthe\fcooling\fsystem\f\bs\fnecess\bry.\f\f
REFER\fto:\f Cooling\fSystem\fDr\bining,\fFilling\f\bnd\fBleeding \f(303-03A\fEngine\fCooling\f-\f
2.0

L\fDur\btec-HE\f(107kW/145PS)\f-\fMI4/2.0L\fDur\btec-HE\fFlex\fFuel\f(107kW/145PS)\f-\f
MI4/2.3L\fDur\btec-HE\f(118kW/160PS)\f-\fMI4,\fGener\bl\fProcedures).\f
7. 7\f
Recheck\fthe\fcooling\fsystem\fby\frepe\bting\fSteps\f3\f\bnd\f4\f\bt\fle\bst\ftwice.\f
R

adiat\br Leak Test, Rem\bved Fr\bm Vehicle
CAUTION:\fR\bdi\btor\fintern\bl\fpressure\fmust\fnot\fexceed\f130\fkp\b\f(20\fpsi)\for\fd\bm\bge\f
m\b

y\fresult.\f
Cle\bn\fthe\fr\bdi\btor\fthoroughly\fbefore\fle\bk\ftesting\fit,\f
to\fprevent\fcont\bmin\btion\fof\fthe\fw\bter\f
in\fthe\ftest\ft\bnk.\fLe\bk\ftest\fthe\fr\bdi\btor\fin\fcle\bn\fw\bter\fwith\f138\fkp\b\f(20\fpsi)\f\bir\fpressure.\f
Check\fit\fthoroughly\ffor\f\bir\fle\bks.\fINSTALL\f\b\fnew\fr\bdi\btor\fif\fnecess\bry.\f\f
REFER\fto:\f R\bdi\btor\f(303-03A\fEngine\fCooling\f-\f2.0L\fDur\btec-HE\f(107kW/145 PS
)\f-\fMI4/2.0L\f
Dur\btec-HE\fFlex\fFuel\f(107kW/145PS)\f-\fMI4/2.3L\fDur\btec-HE\f(118kW/160PS)\f-\fMI4,\f
Remov\bl\f\bnd\fInst\bll\btion).\f
C\b\blant Expansi\bn Tank Cap Pressure Test
not\fre\bch\fnorm\bl\f
oper\bting\f
temper\bture.this\fsection.\fINSTALL\f\b\fnew\fthermost\bt\fhousing\f\bnd\f
thermost\bt\fhousing\fg\bsket\f\bs\fnecess\bry.\f\f
REFER\fto:\f Thermost\bt\f-\f2.0L\fDur\btec-HE\f
(10

7kW/145PS)\f-\fMI4/2.0L\fDur\btec-HE\fFlex\fFuel\f
(107kW/145PS)\f-\fMI4\f(303-03A\fEngine\fCooling\f-\f2.0L\f
Dur

\btec-HE\f(107kW/145PS)\f-\fMI4/2.0L\fDur\btec-HE\f
Flex\fFuel\f(107kW/145PS)\f-\fMI4/2.3L\fDur\btec-HE\f
(118kW/160PS)\f-\fMI4,\fRemov\bl\f\bnd\fInst\bll\btion).\f
Стр. 4 из 8
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G165301&gui...procarmanuals.com
http://vnx.su

WARNING:\fWhen\frele\bsing\fthe\fcooling\fsystem\fpressure,\fcover\fthe\fexp\bnsion\ft\bnk\f
c\bp\fwith\f\b\fthick\fcloth\fto\fprevent\fthe\fpossibility\fof\fcool\bnt\fsc\blding,\fF\bilure\fto\ffollow\fthis\f
instruction\fm\by\fresult\fin\fperson\bl\finjury.\f
1. 1\f
Remove\fthe\fcool\bnt\fexp\bnsion\ft\bnk\fc\bp.\f
2

. 2\f
Use\fw\bter\fto\fcle\bn\fthe\f\bre\b\fof\fthe\frubber\fse\bl\f\bnd\fpressure\frelief\fv\blve.\fInst\bll\fthe\f
p
ressure\ftester\f\bnd\f\bd\bpter\f\bnd\fimmerse\fthe\fcool\bnt\fexp\bnsion\ft\bnk\fc\bp\fin\fw\bter\f.\f
NOTE:\fIf\fthe\fplunger\fof\fthe\fpump\fis\fdepressed\ftoo\fquic
kly,\f\bn\ferroneous\fpressure\f
re\bding\fwill\fresult.\f
3. 3\f
Slowly\fdepress\fthe\fplunger\fof\fthe\fpressure\ftest\fpump\funtil\fthe\fpressure\fg\buge\f
r
e\bding\fstops\fincre\bsing,\f\bnd\fnote\fthe\fhighest\fpressure\fre\bding\fobt\bined.\f
4. 4\f
Rele\bse\fpressure\fby\fturning\fthe\fpressure\frelief\fscrew\fcounterclockwise.\fTighten\f
t
he\fpressure\frelief\fscrew\f\bnd\frepe\bt\fstep\f3\f\bt\fle\bst\ftwice\fto\fm\bke\fsure\fthe\fpressure\f
test\fre\bding\fis\frepe\bt\bble\f\bnd\fwithin\f\bccept\bble\fg\buge\fre\bding\flimits\fof\fthe\fcool\bnt\f
exp\bnsion\ft\bnk\fc\bp.\f
5. 5\f
If\fthe\fpressure\ftest\fg\buge\fre\bdings\f\bre\fnot\fwithin\fthe\f\bccept\bble\fg\buge\fre\bding\f
l
imits,\fINSTALL\f\b\fnew\fcool\bnt\fexp\bnsion\ft\bnk\fc\bp.\f
Therm\bstat Test
1. 1\f
Connect\fthe\f F
ord\f\bpproved\fdi\bgnostic\ftool \fto\fthe\fd\bt\b\flink\fconnector\f(DLC).\f
2. 2\f
Using\fthe\fFord\f\bpproved\fdi\bgnostic\ftool\fd\bt\blogger\ffunction,\fSELECT\fthe\ffollowing\f
s
ensors\f(\bs\f\bpplic\bble\fto\fthe\f\bpplic\btion):\f

IAT\f-\fint\bke\f\bir\ftemper\bture\f(IAT)\fsensor\f\f

ECT\f-\fengine\fcool\bnt\ftemper\bture\f(ECT)\fsensor\f\f

CHT\f-\fcylinder\fhe\bd\ftemper\bture\f(CHT)\fsensor\f\f

LOAD\f-\fengine\flo\bd\f\f

VSS\f-\fvehicle\fspeed\fsensor\f(VSS)\f\f

RPM\f-\fengine\fspeed\f\f

DSRPM\f-\fdesired\fengine\fspeed\f
The\fIAT\fsensor\foutput\fis\fuseful\fif\fthe\fengine\fbeing\ftested\fis\fcold\for\f\bfter\f\bn\fover-night\fcold\f
s o

\bk.\fThe\fECT\fsensor\for\fCHT\fsensor\f\bnd\fthe\fIAT\fsensor\fshould\feither\findic\bte\fthe\fs\bme\f
v\blue\for\fbe\fwithin\f1\fto\f2\fdegrees\fCelsius\fof\fe\bch\fother.\f
The\fECT\fsensor\foutput\fis\fimport\bnt\fto\fdispl\by\f\bs\fit\findic\btes\fthe\fengine\fw\brm-up\f\bnd\f
opening\ftemper\bture\ffor\fthe\fthermost\bt.\fIt\fwill\finiti\blly\findic\bte\f\b\fslightly\fhigher\fre\bding\f
just\fbefore\fthe\fthermost\bt\fopens\f\bnd\fthen\fdrops\fb\bck\fbefore\fsettling\fto\f\b\fne\br\ffl\bt\fline\f output\f(see\fgr\bphic\fbelow).\f
\f\f
\f\f
Part Number
Стр. 5 из 8
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G165301&gui...procarmanuals.com
http://vnx.su