engine FORD SIERRA 1992 2.G XR4 Workshop Manual

Introduction0 1
BAT BATBAT BAT
BAT is pleased to be able to offer this line of components
for the U.S. specification "Merkur" XR4ti, Scorpio and the
other European models of Sierra lineage. European Sierra
models have been manufactured since 1982 and include
two versions or body styles. We will concern ourselves with
the Mark 1 as it is more similar to our U.S. version. The high
water marks of the MK1 series are the XR4i and the Sierra
Cosworth and R/S 500 models. From the exterior, XR4i is
very similar to the U.S. Merkur XR4Ti in overall looks.
However, under the hood it is powered by a 2.8L V-6 engine
where we have the 2.3L 4 cylinder turbo. The other notable
MK1 car the Cosworth Sierra is simply one of the more
outrageous vehicles Ford has ever offered. The Cosworth
starts life as a base Sierra three door body shell and adds a
high performance engine, suspension, transmission, and
aerodynamics, making it one of the fastest 4 passenger road
cars in the world. Power comes from a 2.0L Cosworth Turbo
YB series engine rated at 205 h.p. in its base form, and
upwards of 550 h.p. in modified rally form. The R/S500
homologation outgrowth of the R/S Cosworth version is
basically a de-tuned race car in street trim. Sierra MK2
versions received a sheet metal make over but share most of the mechanicals of the MK1. Interesting MK2
Sierra's include the Sierra Sapphire Cosworth, and Sierra XR 4x4 - an advanced 4 wheel drive 4 door sedan.
What all this Sierra history means to us is an abundance of specialized
performance parts, many of which bolt-on to our U.S. spec. Merkur. With
this in mind Merkur owners can make an good vehicle even better. It is
very amusing how much attention a Merkur that has been outfitted with
Ford badges and Sierra logos and Cosworth grille commands, let alone
a car equipped with the complete Cosworth body work!
BAT BATBAT BAT
BAT is a recognized Ford Motorsport USA and Ford Motorsport/
Rallysport European dealer with over 30 years of experience of tuning
European Ford automobiles. From Cortinas, Lotus Cars and Anglias
during the 60's through the 70's with Pinto and Capri and into the 80's
and 90's with Fiesta, Escort and Merkur. Our expertise with building and
racing 4 cylinder Ford powered cars includes Formula Ford, Formula
Continental & Atlantic, SCCA Production, Showroom Stock, Auto-X,
Improved Touring and Circle Track racing classes. We have a highly
capable staff and you can confidently allow them to handle even your
most difficult technical needs. Better still, our ability to buy in quantity,
import products directly, and manufacturer speciality components
assures you are getting the right parts at the right price
.
P.S. We have recently added a considerable number of parts for the Merkur Scorpio. Most of the XR4 items
will have a Scorpio alternate available. See the price list for more information. You can also view and
download updates to this catalog from our web site at www.batinc.net
Peter Thompson Eric Odenweller
and the staff at
BAT BATBAT BAT
BAT Inc.

Suspension
pC Camber Shims
pD Front
Strut Tower Brace
pE RearpA
Suspension Packages -XR4
Below is a listing of shock and spring packages available as engineered
suspension packages. Fixed rate or adjustable shocks are supplied as noted.
More information on the shocks that make up these kits is listed elsewhere in
the front and rear suspension sections. Kits are available with either -25mm
or standard ride height sport springs- your choice same price !
Spax Sport Gas Shocks & Sport Springs (-25mm or Standard) M400S
* supplied with fixed rate high performance gas shocks
Bilstein Gas Shocks & Sport Springs (-25mm or Standard) M400B
* supplied with fixed rate high performance gas shocks
Spax Sport Adjust Shocks & Sport Springs (-25mm or Std.) M400A
* supplied with adjustable high performance gas shocks
pB Sport Spring Sets -XR4
Our specially designed progressive rate sport springs will minimize body "roll" while
cornering and reduce "dive" under hard braking. Progressive springs are designed to
become stiffer as they are compressed allowing for a smooth transition between (very
reasonable) straight line comfort and high performance cornering. We recommend
the standard height or -25mm ride height sets for all around performance street and
light competition use, the -40mm springs should be considered for only racing/
competition use. Take into account when lowering your cars ride height that additional
negative camber will be added to the front and rear suspension angles. This is usually
not a problem on the front end, however, cars that are already experiencing noticeable
wear on the inside edges of the rear tires at "standard" ride height will see this increase
when lowering. This condition can be corrected if necessary by using camber shims
(kit available below) at the rear spindle mount to adjust for excessive negative camber.
Notes: Defining "standard" ride height is difficult on the XR4 as the springs on many
cars have already "sagged" 1/2 to 3/4 of an inch since new. In this case if the front
and rear tires are still wearing normally lowering the car another 1/4" or 1/2" (over what
it is currently) should not adversely effect tire wear.
Sport Spring Set -25mm (front & rear) XR M414M
Competition Spring Set -40mm (front & rear) XR M414C
Sport Spring Set*
Standard Height (front & rear) XR M414S
See Price List For Scorpio Spring Applications
pC Rear Camber Shim Kit -XR4
To correct rear camber angles on cars that have excessive negative camber
we offer a handy rear spindle shim kit. This kit is sometimes necessary on cars
with lowered sport springs, but can also be used to correct camber on cars with
"sagging" stock rear springs. The components (instructions and shims)
needed to space the rear bearing spindles between the brake backing plates
are supplied. This camber kit will add roughly 1.5 degrees of positive camber
and adjust rear toe back with in standard range as well.M423R
pD
Front Strut Tower Brace -XR4
The XR4 has a well built chassis structure that does not exhibit much flex
under normal conditions. With the addition of high performance tires and
suspension parts more stress is put on the front strut towers causing some
deflection under hard cornering which will eventually weaken the structure
and lead to unpredictable handling characteristics. Connecting the front strut
towers by adding a upper stressbar (strut tie bar) will improve chassis
stiffness and keep the suspension angles constant under hard use condi-
tions. For this purpose we offer a lightweight aluminum front tower brace
(stressbar) that incorporates a removable tubular cross brace and cast alloy
turret mounts. Highly recommended for cars that are used for track events,
drivers schools, auto-cross and spirited road use.M403F
pE
Rear Shock Mount Brace XR4
Our rear (stressbar) is a nicely finished lightweight tubular aluminum rear
brace which is just the thing for linking left and right hand upper shock mounts.
A slight bit of plastic trimming is required when fitting. Bars are supplied with
an attractive blue finish.M403R

(less expensive steel version of above) M403RS pA
Suspension Packs
0 3
pB Sport Spring Sets

Brake (related)
pA
pEpA
Racing Brake Fluid Not all brake fluid is created equally. High
operating temperatures at the caliper transfers extreme heat through the piston
causing lesser quality brake fluid to boil. This in turn allows the fluid to become
compressed and reduces overall braking performance. The best way to
counter this from happening is to use a racing specification, mineral (never
synthetic) brake fluid and flush the system after each event for competition or
annually on performance street driven vehicles. Both AP550 and Wilwood 570
brake fluid is DOT approved with a dry boiling point of 550-570 degrees, low
viscosity minimizes aeration and permits easy bleeding.
Brake Fluid AP Competition (16.9oz. 500ml.) MC550
Brake Fluid Wilwood 570 (12oz. 355ml.) MC570
Brake Fluid Wilwood 570 (6 Pack) MC57-6
Brake Fluid Wilwood 570 (24 Case) MC57-C
pB
Cosworth & Scorpio Rotors For those fortunate few who own
Cosworth Sierras or have converted XR4's to Cosworth type front or rear brakes
and are in need of replacement rotors we have them. Scorpio front or rear rotors
in standard and cross drilled are also available. (see price list page 31)
Cosworth Front 283 x 24mm standard, X-drilled, grooved
Cosworth Rear 273 x 10mm standard, X-drilled, grooved
Scorpio Front 260 x 24mm standard or X-drilled
Scorpio Rear 253 x 10mm standard or X-drilled
Performance Brake Kits Engineered competition brake kits for the
ultimate in stopping power.
pC Front R/S Brake Kit (283 x 24mm)
BAT R/S "big brake" kit allows larger 11.25" (285mm) brake rotors to be fitted
with standard XR calipers. Increasing rotor "swept area" in this way will greatly
improve stopping power (leverage) and help to reduce high brake temperatures
that can cause premature brake fade and poor pedal feel.
Kit includes:
285 x 24mm vented (standard or cross-drilled) rotors, Mintex 1144 brake pad
set, caliper mounting brackets & hardware (fitment with most 15" wheels -
some require slight modification)
kit supplied with standard rotors
M418
kit supplied with cross drilled rotors M418A
pD Front Brake Kit (283 x 24mm) w/4 Piston Calipers
Combine the performance of the R/S large rotor kit with 4 piston calipers for the
ultimate in stopping power.
includes: 283 x 24mm vented rotors,
4-piston alloy Wilwood Superlite 2A calipers with pads. (fitment with most 15"
wheels -some require modification or spacers)
M416W
pD Front Brake Kit (300 x 32mm) w/4 Piston Calipers
For those who are looking for the ultimate brake performance. Quite simply the
largest and most competent competition type brake kit that can be fitted to the XR4.
includes: 300 x 32mm vented rotors with light alloy hats, 4-piston alloy Wilwood
Superlite IIA calipers, caliper mounting brackets & hardware
M417A
(this kit also available for Scorpio ! ) G417A
Rear Kit (XR4 w/16" wheels) 300 x 21mm (See Price List)
includes: 300 x 21mm vented rotors with light alloy hats, 4-piston alloy Wilwood
Superlite 2A calipers, caliper mounting brackets & hardware
pE Wheel Bearings Genuine European Ford wheel bearing kits are
complete with all required service parts to do a first class job. Each kit
include bearings, races, seals and hub nuts to service one wheel.
Front Wheel Bearing Kit (specify left or right) -XR4 M560F
Rear Wheel Bearing Kit (specify left or right) -XR4 M560R
Front Wheel Bearing Kit (specify left or right) -Scorpio G560F
Rear Wheel Bearing Kit (specify left or right) -Scorpio G560R
pB
pC
pD
1 0

pA Constant Velocity Joints & Boots The Merkur XR4Ti and Scorpio
independent rear axle assemblys utilize half shafts that have inner and outer constant
velocity joints. Eventually these joints and protective boots will require service. We
have joints and boots available separately making it economical to replace just the
worn component without having to replace whole axle assembly. However, if more
than one C.V. per axle requires service, our complete axle assembly is the more cost
effictive way to go.
Note: right/left inboard and outboard C.V. joints and boots are
interchangeable- see price list for complete axle prices (handed left & right)
Constant Velocity Joint- XR4 & ScorpioM550B
C.V. Boot Kit-
XR4 & ScorpioM550BK
Complete Axle(specify left or right)-
XR4 & ScorpioM550L/R
pB
Rubber Drive Shaft Coupling The rubber "Drive Donut" or "Rotoflex
Coupling" on the XR4 and Scorpio drive shaft can be a real bugger. Many owners
have contacted us after being quoted up to 500.00 to totally replace the complete
drive shaft assembly by the local Ford L/M dealer, as they do NOT list the rubber
drive coupling as a separate service part. We import the proper replacement
drive coupling and make it available at considerable savings to you. If your car
exhibits a driveline shudder that increases with speed, (especially noticeable in
colder weather) we recommend taking a close look at the condition of the drive
coupling. Cracks in the rubber or missing pieces will require immediate replace-
ment, loosing one of these joints at speed will be very messy !
Note: BAT supplies
the standard equipment XR4i drive coupling by the original supplier to Ford. This
is not a lesser "fits all" component that just happens to be similar.
Rubber Drive Shaft Coupling- XR4 & ScorpioM17A
pC
Drive Shaft Center Support Bearing- Replacement driveshaft
center support bearing assemblys for XR4Ti and Scorpio.
Drive Shaft Center Support Bearing- XR4Ti M550SB
Drive Shaft Center Support Bearing- Scorpio G550SB
pD
Quaife Torque Biasing Differential Quaife torque biasing
differentials provide a constant and infinitely variable output to both rear
wheels. These unique differentials utilize a series of helical gears which
sense the amount of applied torque and adjust automatically for loss of
traction. The Quaife limited slip design is also free of high wear items
(clutches, ratchets and plates), making them stronger and more maintenance
free than other types of limited slip units. Anyone who has had the pleasure
of driving a vehicle equipped with a Quaife LSD will immediately comment on
its smooth seamless performance, very unlike clutch/plate type LSD's which
exhibit a notchy ratchet like take up through the drive line. The Quaife LSD
that we offer is originally designed as a replacement upgrade for the Sierra
Cosworth and are now supplied with output flanges tapped for either the large
108mm (Cosworth size) or smaller 100mm (XR4 size) C.V. joints.
Quaife Limited Slip DifferentialM710
pE
Clutch Kits We have a very good selection of clutch packages that include
clutch disk, pressure plate, throw out bearing, and clutch alignment tools. Buying one
of our engineered kits will guarantee best quality, performance, fitment (ease of
installation) and price. First option is a new (not rebuilt or re-lined) O.E. quality
replacement clutch kit by Sachs/Valeo. This clutch is best suited for standard or
slightly modified cars being used under normal driving conditions. If your requirements
are beyond the capabilities of the standard clutch we also have some heavy duty clutch
kit options. H.D. clutch kits include pressure plates that have increased clamping force
(from 30 to 50%) and clutch disks with high temperature friction materials applied.
Centerforce H.D. clutch kits have a unique centrifugal pressure plate design with
substantially more clamping force but requires very little pedal pressure over the stock
clutch.
Note: all kits are for standard transmission 1" 23 spline except where noted.
Sachs Clutch Kit XR - best quality O.E. clutchM519K
Sachs Clutch Kit Scorpio -
best quality O.E. clutchG519K
Sachs Clutch Kit XR w/ T5 Trans -
1 1/16" 10 spline for T-5 transM519T5
H.D. Centerforce Clutch Kit -
uprated disk & 30% p. plateM519C
H.D. Center Force II Clutch Kit -
uprated disk & 50% p. plateM519C2
Clutch Alignment Tool -
1" 23 spline for std. transmissionS11H
Clutch Cable- XR4Ti M562
Clutch Cable- Scorpio G562pD
Driveline
pA
pD pB
pC
1 1

Bodywork
pL
pM
pNpE
pA pL
pC pD
pF
pBpG
pH
pI
pJ
pK
pA Front Fenders European Sierra fenders are a direct replacement for the
XR4Ti and are an attractive alternative considering the high price of the American
version. These fenders also include the holes required for side blinker mounting
(see below).
Note: specify left or right when ordering M806 L/R
pB
Inner Wheel Well Splash/Liners Replacements for the commonly
cracked, broken or missing inner fender splash on the XR4. Covers full inner
wheel house area as origional USA versions.
specify left or right M808L/R
pC
Door Skin - (specify left or right)M807 L/R
pD
Door Handle XR4 & Scorpio - (specify left or right)M362 L/R
pE
Door Sill (Rocker Panel) - (specify left or right)M803 L/R
pF
Rear Wheel Arch - (specify left or right)M804 L/R
pG
Battery TrayM817
pH
Rear PanelM815
pI
Cosworth Front Grille Nothing transforms the look of the XR4Ti quite like
adding a Cosworth grille. Designed with a center opening, the Cosworth grille
adds additional air flow to the radiator and A/C condenser for a cooler running
engine and better air conditioning performance. An intercooler could also be fitted
behind the grille opening as is done on the original Cosworth Sierra and R/S 500
models.
Note: Grilles are O.E. quality (injection moulded plastic) not shoddy fiberglass
replicas. Suppled (primed) un-painted- includes "Ford" emblem
M320
pJ
Grille Surround Gasket This gasket will almost always need to be
replaced when fitting a new grille.M320S
pK
European Side Blinker Lamp Kit Add an extra degree of safety when
signaling to turn. Side blinkers fit above European fenders without modification
and can also be fitted to standard Merkur XR4Ti fenders by drilling a mounting
hole. Kit includes (2) lamps, wiring and templates.M317
pL
Cosworth Hood Original equipment Ford Sierra Cosworth hoods are
designed to receive hood vents/louvers for additional under hood cooling. These
hoods look quite distinctive as the raised center section is lower and wider than
on the standard XR4 hood giving the car a more aggressive appearance.M813
pM
Cosworth Hood Vents Hood louvers/vents are both visually striking and
functional as they help to ventilate the engine compartment. These O.E. Ford vents
(pair) bolt into the Cosworth hood (above) or can be fitted to standard hoods by cutting
a hole and bonding them in place.
(see pg 11 for fiberglass versions)M814
pN
Cosworth Front Spoiler/Bumper We supply everything required to
install the stunningly attractive Cosworth Sierra front spoiler/bumper to your
XR4Ti. All components are original Ford including; bumper, bumper bar
brackets, lower side fender mounting panels, fog lamps, turn signal lamps, and
assorted hardware (clips & fasteners).
Note: bumpers are supplied in white-
can be painted to match other colors.
M353
(R/S 500 Version) M353RS
1 2

Accessories (books)
pA The Sporting Fords- Volume 4: Sierras by Graham Robson.
This book has comprehensive information on the development and
history of all Sierra, Sierra Cosworth, and Merkur models. Chapters
include production street and race versions of the cars, technical
information and specifications, buyers and identification guide,
performance figures and much more.
Hard bound 9 1/2" x 7 1/2", 128
pages, 131 black & white illustrations.
M207
pB High Performance Sierras & Merkurs by various authors.
Packed with reprints of magazine articles, road tests of production
and racing cars, data & comparisons, development, specifications,
and tuning. Cars covered in this publication are Sierra, Sierra
Cosworth, RS500, XR 4x4, and Merkur XR4Ti models.
Soft bound 8
1/2" x 11", 172 pages, 200 + black & white illustrations.
M206
pC Classics in Color - Ford Sierra Cosworth by Dennis Foy &
Terry West. A full color profile of the Sierra Cosworth line
including R/S Cosworth, RS500, Cosworth 4x4, and Cosworth
Sapphire. Great color photographs of both production and racing
variants of these unique vehicles.
Soft bound 7 1/2" x 10, 96
pages, 130 color illustrations.
M203
pD Workshop Manual- Sierra 1982-1992 by Haynes. Covers the
European Sierra & Sapphire 4 cylinder models (except Cosworth). Lots
of good information covering repair procedures (light-years ahead of
Chiltons). Most sections, with the exception of the engine, are the same
or similar to the US cars. An inexpensive alternative or addition to the
American Merkur Manual.
Hard bound 8 1/2" x 11 ", 250 pagesM204
pE Workshop Manual- Sierra XR4i (V6) by Haynes. Similar to
above, covers the XR4i & XR4x4 V6 equipped models.
Hard bound
8 1/2" x 11 ", 250 pages
M204A
pF Workshop Manual- Scorpio (V6) by Haynes Covers the
European Scorpio/Granada V6 models- very similar to our US spec cars.
A handy manual to have.
Hard bound 8 1/2" x 11 ", 250 pagesG204
pG Build & Modify Ford V6 Engines by Sven Pruett. A very
well done build and tune book covering the V6 Ford 2.6, 2.8, 2.9, 4.0L
engines.
Soft bound 8 1/2" x 11", 160 pages.G202
pA
pC
pB
pD
pFpE
pG
pH
pH How To Prepare The Sierra For Motorsport by Ford Motor
Company Competition Department & Graham Robson. Complete
guide to race preparing the European specification Sierra for
motorsports competition. Chapters on modifying suspension, body,
engine, driveline, brakes, clutch, and differential- including
specifications and part number listings.
Soft bound 8 1/4" x 11 3/4",
147 pages, 150 black & white illustrations.
M205
Workshop Manual- Sierra & Escort Cosworth origional European
Ford shop manuals (2 volume set) for the Cosworth cars.M202
The Complete 2.3L Turbo EEC-IV Handbook a comprehensive
view of the engineering, performance characteristics, and troubleshooting
for each component of the EEC-IV engine control system.M209
Ford Sierra Cosworth
Dennis Foy & Terry West
(Not Pictured)
2 0

pA
pB
pC
pD
pE
pF
pG
pH pJ
pK
pL
pP
pIpN
pOpM
pS
pR pQ
Cooling System (Scorpio)
In addition to our stock of cooling system components for the XR4Ti
we have added the various Scorpio related items to our inventory.
The Scorpio's cooling system is only slightly less complicated than
the XR4Ti's, it's only saving grace is the parts do not vary all that
much from year to year. Again, as with the XR4, components that
we offer are from the O.E. supplier or Ford originals.
pA Hose*- heater valve (outlet) to heater core G421HA
pB
Hose*- heater valve to engine/inlet mfld.G421HB
pC
Hose*- heater valve (inlet) to heater coreG421HC
pD
Hose*- heater valve to pipeG421HD
*for additional info see (diagram A) on page 20
pE Radiator- new original equipment Ford radiators at a very
attractive prices. Don't be mislead into buying substandard
fabricated or fits-all radiators when we can supply new Ford ones
for less.
(for automatic trans)G421RA
(for manual trans.)G421R
pF
Hose- coolant tank to thermostat housingG421HF
pG
Hose- top radiator hose (88-89)G421TH
pG
Hose*- top radiator hose (89 late) has vent air bleed in line
(includes bleed screw).G421TH-9
*for additional info see (diagram B) on page 20
pH Hose- tank (lower) to water pumpG421HH
pI
Water Pump- new Ford water pumpG421
pI
Water Pump- high quality reconditioned water pump on
Ford core.G421A
Hose*- bypass from water pump to inlet mfld.G421HP
*for additional info see (diagram A) on page 20
pJ Hose- lower radiator hose 88-89G421BH
pJ
Hose*- lower radiator hose (89 late) has additional tee off
hose running to overflow tank @ lower bungG421BH-9
*for additional info see (diagram B) on page 20
pK Hose*- to oil cooler pipeG421HK
pL
Hose*- oil cooler pipe to oil coolerG421HL
*for additional info see (diagram A) on page 20
pM Coolant Tank- Cracked and leaking overflow tanks are a
common problem on the Scorpio. Tank pictured above is for early
(1988) type cars.
See page 20 for late style tanks.G421TE
pN
Radiator Cap- cap for Scorpio and XR4's with thread-on
coolant tankG421C
pO
Oil Cooler- replacement water to oil heat exchanger.
If water is showing up in your oil it would most likely be either a head
gasket or one of these.AD1000
pP Heater Control Valve- heater control valve, same on
XR4 & ScorpioM421V
pQ
Heater Core- Quality Ford O.E. heater cores.G471
pR
Mechanical Fan Clutch- Quality Ford O.E.G422
pR
Electric Fan- An altermative to the Scorpio mechanical
clutch fan. This highly efficent (1150 cfm) 16" electric "puller" fan
moves more air and frees up a few HP to boot. Wire directly or use
our (optional) adjustable 165-215 degree thermostat/relay wiring kit.
(16" electric fan) A16F-PL
(thermo/relay wiring kit) AFTR1
pS
Heater A/C Blower Motor- New Ford heater blower motor
for Scorpio with 8 wire harness/plug.
G470H
see (diagram A) on page 20
2 2

Cooling System (Scorpio) supplement
pA
pF
pHpJ
Diagram A - heater and oil cooling water system
Scorpio 1988-89 (all)
pA
Hose*- heater valve (outlet) to heater coreG421HA
pB
Hose- heater valve to engine/inlet mfld.G421HB
pC
Hose*- heater valve (inlet) to heater coreG421HC
pD
Hose*- heater valve to oil cooler pipeG421HD
pE
Heater Control Valve*- heater control valve, same on
XR4 & ScorpioM421V
pF
Hose- connects coolant pipe from heater control valve
to oil cooler.G421HL
pG
Oil Cooler*- replacement water to oil heat exchanger.
If water is showing up in your oil it would most likely be either a
head gasket or one of these.AWC1
pH Hose*- oil cooler to coolant pipe.G421HM
pI
Hose*- connects coolant pipe from oil cooler to water
pump.G421HK
pJ
Hose- bypass from water pump to inlet mfld.G421HP
*these items are also shown on page 19 diagram
Diagram B- Components unique to late 89 Scorpio
Scorpio 89 (late)
pK
Hose*- top radiator hoseG421TH
*hose with vent is no longer avalable
pL Hose- coolant tank to thermostat housingG421HF-9
pM
Tank Level Sender- sender/float assembly. Fits all
Scorpio & XR4 over flow tanks.M421LS
pN
Sender Install Kit- the 3 components (threaded collar,
spacer ring, rubber gromett) required to stop a leaking
sensor bung. Also a good idea when servicing the tank level
sensor (see above part).M421SK
pO
Cap/Plug- small rubber cap for plugging off the unused
waterpump port .G421P
pP
Hose- lower radiator hose (89 late) has additional tee off
hose running to overflow tank @ lower bungG421BH-9
pQ
Coolant Tank- oval type tank (use G421TL below)
pR Coolant Tank- late style (1990-92) coolant tank.
Rectangular (larger volume) tank is a direct fit upgrade to the
oval version listed above.G421TL
pS
Radiator Cap- cap for Scorpio and XR4's with thread-
on coolant tankG421C
pK
pM
pN
pO
pPpQpR
see page 19
for radiators
see page 19
for water pump
Diagram B
pC
pDpB pE
pG
pS pLpS
Diagram A
pI
2 3

Turbocharger
pC
pG/H/I
pF
pD
pA
pB
pE
pA Standard Wastegate Actuator Since the stock XR
wastegate is no longer available new, we supply a high quality
re manufactured unit. Internal components (diaphragm) are re-
placed and exterior is zinc plated.) M521WR
pB
Turbochargers We offer both re manufactured stock
specification and modified high performance turbos for the
XR. High quality re manufactured turbos include; new center
cartridge compressor/turbine wheel assembly with recondi-
tioned outer compressor/turbine housings, new bearings,
seals and O-rings and fasteners. Our high performance turbo
adds a few extra tweeks. A GNX compressor wheel machined
into the stock comp housing for an additional 30% airflow and
a 360 degree thrust bearing is fitted for added durability.
Turbos are fully dressed and include wastegate actuator,
base & drain gaskets and sold on a exchange "core" basis-
outright purchase will add an additional $100.00 to the cost.
Standard Reman. Turbocharger M522TR
High Performance Turbocharger M522TM
pC
Intercooler Kit If you are looking for a large high flow
intercooler kit this is the one to have. Intercooler core mounts
ahead of the steering rack in front of the engine facing the
ground. Air is ducted up and through the core. Plumbing is kept
short and allows for a larger core than what can usually be fitted
in the bumper/grille area. Kit is complete with intercooler core
(8" x 20" x 3.5"), mounting brackets, inlet plumbing pipes &
connectors, clamps, turbo output elbow, bypass valve and
additional hardware and instructions.
M522ICpD
Adjustable Boost Valve Kit Replace the troublesome
stock boost control solenoid with this easy to adjust under hood
boost valve. This kit uses a check valve to accurately control the
boost level which allows for faster turbo spool-up (reduced lag)
over typical adjustable "bleed-off" valves. This is a low cost modifi-
cation and should be a "must have" for all XR's.
M521BV
pE
Dual Port Wastegate Actuator These are new actua-
tors which feature an adjustable length rod (set boost & pre load)
and dual vacuum ports. The dual port feature permits use of a
remote mounted boost valve (see below), but can also be used
as a replacement for stock actuator.
M521WA2
pF
Cockpit Mounted Boost Valve Remote cockpit
mounted adjustable boost valve for use with dual port wastegate
actuators (see above). Vacuum signal is regulated by the in
car mounted valve and recirculated to the dual port actuator for
precise adjustment. M521TB
pG
Turbo Oil Feed Pipe is prone to cracking/leaking and
should always be replaced when a new turbo is fitted to assure
proper oil flow. Just look inside an old one and you will see
what we mean. M522P
pH
Turbo Inlet Hose we have a version of this (discontin-
ued by Ford) hose that links the turbo outlet pipe to the throttle
body. Ours is high specification 4-ply Silicone (blue) rated to
over 600 degrees, 190 psi burst pressure- better & cheaper
than the original ! M22H
pI
Stainless Base Gasket replacement for between the turbo
base and exhaust manifold. L521GT
2 5

Engine & Related Items
pA
pB
pC
pE pDpA
Performance Engine Bearings2.3L At engine rebuild time one item
not to skimp on are engine bearings. We supply only the finest ACL/Vandervell
heavy duty lead-indium type bearings. All bearings are not alike, regardless of
who's name is on the box. Lead-indium bearings, not lesser reticular tin-
aluminum, are the only type you will find in quality performance engines.
Main Bearing Set- ACL/Vandervell (standard)L16A
Main Bearing Set- ACL/Vandervell (+.010" over)L16B10
Main Bearing Set- ACL/Vandervell (+.020" over)L16B20
Main Bearing Set- ACL/Vandervell (+.030" over)L16B30
Rod Bearing Set- ACL/Vandervell (standard)L16H
Rod Bearing Set- ACL/Vandervell (+.010")L16110
Rod Bearing Set- ACL/Vandervell (+.020")L16120
Rod Bearing Set- ACL/Vandervell (+.030")L16130
Cam Bearing Set- ACL/VandervellL16M
Cam Bearing Set- ACL/Vandervell (360 degree O.D. groove)L16MA
Auxiliary Shaft BearingL5DC
pB
Performance Engine Fasteners As with engine bearings, skimping
on fasteners is false economy. As a minimum install a set of H.D. rod bolts and
nuts for an added degree of reliability.
Con Rod Bolt Set (H.D. SPS type)
for standard 2.3 rodL4FS
Con Rod Bolt Set (H.D. SPS type)
for 5.7 Chevy I-6 rodsL4FSC
Head Stud Set (H.D. SPS type)L2DS
Main Cap Stud Set (H.D. SPS type)L2KS
pC
Engine Gaskets (2.3L Turbo) We have a wide range of performance
and speciality gaskets available for the 2.3L turbo engine from full sets to
individual pieces.
Full Gasket Set (complete engine)
FelproL15AA
Top End Gasket Set (cylinder head, valve train, inlet/exhaust) FelproL15BA
Bottom End Gasket Set (block, crank & sump)
FelproL15CA
Pan Set- sump rails & seals (cork)L15CP
Head Gasket H.D. (Ford Motorsport turbo style)L15D
Head Gasket H.D.-
FelproL15DA
Head Gasket Competition-
Felpro #1035 (steel wire ring type)L15DF
Head Gasket Competition (extreme duty racing gasket)L15DR
Head Space Shim .020"L15DS
Valve Cover Gasket (standard cork)L15E
Valve Cover Gasket H.D. (hi-temp rubber / includes- upper inlet gasket)L15EA
Intake Manifold Gasket Set (upper
& lower inlet manifold)L15F
Water Outlet Gasket (thermostat housing)L15N
Water Pump Gasket (pump to block)L15P
Crankshaft Rear SealL15Q
Camshaft SealL15R
Auxiliary Shaft SealL15S
Crankshaft Front SealL15T
pD
2.3 Turbo Inlet Hose We have a version of this (recently discontinued
by Ford) hose that links the turbo outlet pipe to the throttle body on XR4Ti,
T-Bird & SVO. Ours is higher specification 4-ply Silicone (blue) rated to over 600
degrees, 190 psi burst pressure- better & cheaper than the original ! M22H
pE,F
Exhaust Components We offer the Modern Performance line of
exhaust related items for the XR4Ti including full systems (hi-flow down pipe,
converter and muffler) as well as cat back systems (excludes converter).
Exhaust piping and mufflers are constructed in heavy 14 gauge aluminized
tubing, converters and mufflers are straight through design for minimum
restriction. These systems are unparalleled for performance and sound great
too. The 3" down pipe can be added to standard or
Borla systems for increased
performance. We also stock the standard Ford cast iron exhaust manifolds
(which are prone to cracking) or alternate stainless tubular exhaust headers.
Exhaust System 3" (full system)
S.S. muffler & converterM522
Performance Exhaust System 2.5" (down pipe w/cat back)M522B
Exhaust Down Pipe 3"M522DP
Exhaust Manifold (standard cast Fomoco)M521
Exhaust Header 2.3 Turbo (tubular stainless steel)L521T
Gasket (stainless)- Turbo to Exhaust ManafoldL521GT
Exhaust Hanger (rubber donut)C522H
pF
2 6