bolt pattern FORD SUPER DUTY 2015 3.G Owners Manual

1.Align the ornament with the lug nuts.A is the clip and B is the flange.
2.Hold the ornament so that all of theretention clips are sitting on the flangeof the lug nuts.
3.Use your hand or rubber mallet to tapthe ornament in a star pattern. Thereshould be an even gap between theornament and the wheel.
4.Be sure to install all the clips on thenuts over the flanges so that there isan even gap all around and theretention clips are fully seated.
Stowing the Flat or Spare Tire
Note:Failure to follow spare tire stowageinstructions may result in failure of cable orloss of spare tire.
Note:If you are stowing a tire that requiresreattaching it to the vehicle with a tether,perform these steps first, then proceed withthe following steps.
1.Place the tire on end with the valvestem facing toward the front of thevehicle.
2.Place the tether into the bolt holes inthe wheel and attach the lug nut usingthe lug wrench.
297Super Duty (), enUSAWheels and TiresE162823 ACBDE162824 E162825 E162826