air bleeding GEELY MK 2008 Workshop Manual

Bleeding1. Fill brake reservoir with brake fluid
Brake fluid: HZY4 complying with GB12981Section 2 Brake FluidBrake System -Brake Fluid4-812. Bleed brake pipeline system
(1) Connect the vinyl pipe to the wheel cylinder bleeder plug port
(2) Depress the brake pedal several times, and then loosen the bleeder plug with the pedal held down.
(3) At the point when fluid stops flowing out, tighten the bleeder plug, and then release the brake pedal.
(4) Repeat (2) and (3) until all the air in the fluid has been bled out.
(5) Repeat the above procedure to bleed the brake pipeline of the air for each wheel cylinder.
Notice: Fill brake fluid into the reservoir all the time when bleeding.
3. Check fluid level in reservoir
Check the fluid level and fill fluid if necessary.
Tips: Do not mix and use with other brand of brake fluid.