GENESIS G90 2023 Owners Manual

5-120
Convenience Features
Recirculating air when washer fluid
is used
When washer fluid is used, in order to
reduce any objectionable scent of the
washer fluid from entering the cabin,
recirculation mode and air conditioning
are automatically activated depending
on the outside temperature.

[When the air intake control button is
pressed while fresh mode is selected,
air intake control will switch to
recirculation mode.

[When windshield lever is used while
recirculation mode is selected, air
intake control will switch to fresh
mode

[The function may not work in some
conditions such as cold weather or
engine off.
For more details, refer to “Climate
Control Additional Features” section in
this chapter.
Information
)RU*DVROLQH7*',90+(9
vehicles, outside air may enter the vehicle
even while preventing washer fluid scent
IURPIORZLQJLQWKHFDELQWRFRROWKH9
battery.
WARNING
When the outside temperature is below
freezing, ALWAYS warm the windshield
using the defroster to help prevent
the washer fluid from freezing on the
windshield and obscuring your vision
which could result in an accident and
serious injury or death.
NOTICE

[To prevent possible damage to the
washer pump, do not operate the
washer when the fluid reservoir is
empty.

[To prevent possible damage to the
wipers or windshield, do not operate
the wipers when the windshield is
dry.

[To prevent damage to the wiper
arms and other components, do
not attempt to move the wipers
manually.

[To prevent possible damage to the
wipers and washer system, use anti-
freezing washer fluids in the winter
season or cold weather.

5-121
05
AUTOMATIC CLIMATE CONTROL SYSTEM
ORS052100N
)URQWVHDWFRQWURO
1. Driver’s temperature control
2. Passenger’s temperature control
3. Fan speed control
4. Driver’s mode selection
5. Passenger’s mode selection
6. AUTO (automatic control)
7. OFF (system off)8. Front windshield defroster
9. Air intake control
10. Rear window defroster
11. SYNC
12. A/C (air conditioning)
13. Rear control
14. Built in diffuser

5-122
Convenience Features
Rear seat control from the front
1. Temperature control
2. Mode selection
3. AUTO (automatic control)4. OFF (system off)
5. Climate control information screen
6. Fan speed control
ORS052102N
Information
Use microfiber cloth when wiping finger prints off the touchscreen.

5-123
05
Rear seat control (Armrest touchscreen)
ORS052104N
Information

[Press ‘Front’ and select the desired function from the rear armrest touchscreen to
access functions available on the front seats. The following functions are available.
-$872PRGHVHOHFWLRQWHPSHUDWXUHFRQWURODLULQWDNHFRQWUROIDQVSHHGFRQWURO
$&DQGGLIIXVHU

[2SHUDWLQJWKHIDQVSHHGIURPWKHUHDUVHDWDGMXVWPHQWVFUHHQZLOORQO\RSHUDWHWKHUHDU
seat fan speed. 1. Fan speed control
2. Temperature control
3. OFF (system off)4. AUTO (automatic control)
5. Mode selection
6. SYNC (Front and rear seats adjusted
same as the rear seat)

5-124
Convenience Features
1. Driver’s temperature control
2. Passenger’s temperature control
3. Fan speed control
4. Driver’s mode selection
5. Passenger’s mode selection
6. AUTO (automatic control)7. OFF (system off)
8. Air intake control
9. A/C (air conditioning)
10. Built in diffuser
11. Front control
ORS052134N
)URQWVHDWFRQWUROIURPWKHUHDU$UPUHVWWRXFKVFUHHQ
Information
2SHUDWLQJWKHIDQVSHHGIURPWKHIURQWVHDWDGMXVWPHQWVFUHHQZLOORQO\RSHUDWHWKHIURQW
seat fan speed.

5-125
05
Automatic Temperature Control
Mode
The Automatic Climate Control System
is controlled by setting the desired
temperature.
1. Press the AUTO button.
The mode selection, fan speed,
air intake and air-conditioning will
be controlled automatically by the
temperature setting you select.
(To select the rear seat AUTO from
the front seat, press the icon in the
climate control information screen .)
ORS051144
2. When the climate control system is
being automatically controlled, fan
speed can be selected (Low/Medium/
High).

[High: Use when quick heating or
cooling is preferred.

[Medium: Use when medium fan
speed is preferred for cooling or
heating.

[Low: Use when low fan speed is
preferred for cooling or heating.3. Turn the temperature control knob
to the desired temperature. If the
temperature is set to the lowest
setting (Lo), the air conditioning
system will operate continuously.
After the interior has cooled
sufficiently, adjust the knob to
a higher temperature set point
whenever possible.
To turn the automatic operation off,
select any function of the following:

[Front windshield defroster button
(Press the button one more time
to deselect the front windshield
defroster function. The ‘AUTO’
sign will illuminate on the climate
information screen once again.)

[Fan speed control icon
The selected function will be controlled
manually while other functions operate
automatically.
For your convenience and to improve the
efficiency of the climate control, use the
AUTO button and set the temperature to
72°F (22°C).
To change the temperature unit from °C
to °F or °F to °C:
Press the AUTO button for 3 seconds
while pressing the OFF button.

5-126
Convenience Features
Information
ORS051085
Never place anything near the ambient
light/solar sensor to ensure better control
of the heating and cooling system.
Manual Temperature Control
Mode
The heating and cooling system can be
controlled manually by pushing buttons
other than the AUTO button. In this case,
the system works sequentially according
to the order of buttons selected.
When pressing any button except the
AUTO button while using automatic
operation, the functions not selected will
be controlled automatically.
1. Start the vehicle.
2. Set the mode to the desired position.
To improve the effectiveness of
heating and cooling, select the mode
according to the following:

[Heating:

[Cooling:
3. Set the temperature control to the
desired position.
4. Set the air intake control to Fresh or
Recirculation mode.
5. Set the fan speed control to the
desired speed.
6. If air conditioning is desired, turn the
air conditioning system on.
7. Press the AUTO button to convert to
full automatic control of the system.
The climate control system settings
will be maintained, even when the
vehicle is turned OFF. However, the
climate control system settings will be
initialized when the battery has been
discharged, or when the cables have
been disconnected.
In this case, adjust the climate control
system settings again.

5-127
05
Mode selection
ORS052106N
A : Front seat control,
B : Rear seat control
Front seat mode selection

[Touch each air flow direction on the
climate control information screen to
select the desired flow direction.

[Press the SYNC button and when
the indicator light on the button
turns off, the air flow direction of the
driver’s seat, passenger seat, and rear
seat can be controlled individually.
However, passengers and rear seats
cannot select
.

[Touch REAR M to control the second
row seat mode selection from the
front seats.

[You may select 2~3 modes at the
same time.
ORS051108
ORS051142L
A : Rear seat control,
B : Front seat control
Rear seat mode selection

[Touch each air flow direction on the
armrest touchscreen to select the
desired air flow direction.

[Front seat air flow direction can be
selected individually for each seats.

[Air flow direction of the rear left and
right seats change together.

5-128
Convenience Features
ORS051109
Air flow direction
The mode selection icon or button controls the direction of the air flow through the
ventilation system.
Air flow direction F (if equipped) changes along with air flow direction G.

5-129
05

[Front seat air flow selected from the
front
Face-level (B, D)
Air flow is directed toward the upper
body.
Face-level (A, B, D)
Air flow is directed toward the upper
body and face.
Bi-Level (B, &, D)
Air flow is directed toward the upper
body and floor.
Bi-Level (A, B, &, D)

Air flow is directed toward the upper
body, face and floor.
Floor-level (A, &, D)
Most of the air flow is directed to the
floor, with a small amount of the air
being directed to the windshield and side
window defrosters. This air flow direction
is usually used when heating.
Bi-Level (A, &, D)
Most of the air flow is directed to the
floor, with a small amount of the air
being directed to the windshield and side
window defrosters.
Defrost (A, D)
Air flow is directed toward the face.
[Rear seat air flow selected from the
front
Face-level (F, G)
Air flow is directed toward the upper
body.
Bi-Level (E, F, G)
Air flow is directed toward the upper
body and floor.
Floor-level (E)
Most of the air flow is directed to the
floor, This air flow direction is usually
used when heating.