turn signal GENESIS GV60 2023 User Guide
[x] Cancel search | Manufacturer: GENESIS, Model Year: 2023, Model line: GV60, Model: GENESIS GV60 2023Pages: 690, PDF Size: 14.07 MB
Page 416 of 690
7-2
Driver Assistance System
OJWEV071047
Forward Collision-Avoidance Assist is
designed to help detect and monitor the
vehicle ahead or help detect a pedestrian
or cyclist in the roadway and warn the
driver that a collision is imminent with a
warning message and warning and apply
emergency braking.
In addition, if equipped with front corner
radars, when driving at high speeds,
Forward Collision-Avoidance Assist
will help detect vehicles in front and
adjacent lanes. If a collision is imminent
when changing lanes, Forward Collision-
Avoidance Assist will apply emergency
braking to help prevent a collision.Junction Turning functionOJWEV071048
Junction Turning function can help avoid
a collision with an oncoming vehicle in
an adjacent lane when turning left at
a crossroad with the turn signal on by
applying emergency braking.
Junction Crossing function (if
equipped)
OJWEV071049
Junction Crossing function can help
avoid a collision with oncoming vehicles
on the left or right side when crossing
an intersection by applying emergency
braking.
) 2 5 : $ 5 ' & 2 / / , 6 , 2 1
Page 452 of 690
7-38
Driver Assistance System
Collision warning
[ Collision warning will operate when
the turn signal is turned on in the
direction of the detected vehicle.
[ If ‘Warning Only’ is selected from the
Settings menu, the collision warning
will operate when your vehicle
approaches the lane the blind spot
vehicle is detected.
[ To warn the driver of a collision, the
warning light on the outside rearview
mirror and head-up display (if
equipped) will blink. At the same time,
an audible warning will sound and the
steering wheel will vibrate.
[ When the turn signal is turned off or
you move away from the lane, the
collision warning will be cancelled and
Blind-Spot Collision-Avoidance Assist
will return to vehicle detection state.
: $ 5 1 , 1 *
[ The detecting range of the rear
F R U Q H U U D G D U L V G H W H U P L Q H G E \ D
V W D Q G D U G U R D G Z L G W K W K H U H I R U H R Q
D Q D U U R Z U R D G % O L Q G 6 S R W & R O O L V L R Q
$ Y R L G D Q F H $ V V L V W P D \ G H W H F W R W K H U
Y H K L F O H V W Z R O D Q H V R Y H U D Q G Z D U Q
\ R X , Q F R Q W U D V W R Q D Z L G H U R D G
% O L Q G 6 S R W & R O O L V L R Q $ Y R L G D Q F H
$ V V L V W P D \ Q R W E H D E O H W R G H W H F W D
Y H K L F O H G U L Y L Q J L Q W K H Q H [ W O D Q H D Q G
P D \ Q R W Z D U Q \ R X
[ : K H Q W K H K D ] D U G Z D U Q L Q J I O D V K H U L V
R Q W K H F R O O L V L R Q Z D U Q L Q J E \ W K H W X U Q
V L J Q D O Z L O O Q R W R S H U D W H
OJWEV071145L
Collision-avoidance assist (while driving)
[ To warn the driver of a collision, the
warning light on the outside rearview
mirror will blink and a warning
message will appear on the cluster. At
the same time, an audible warning will
sound, warning light on the head-up
display (if equipped) will blink and the
steering wheel will vibrate.
[ Blind-Spot Collision-Avoidance Assist
will operate when your vehicle speed
is between 40-120 mph (60-200 km/h)
and both lane markings of the driving
lane are detected.
[ Emergency braking will be assisted to
help prevent collision with the vehicle
in the blind spot area.
Page 483 of 690
7-69
07
Blind-Spot View Monitor
Operating conditions
When the left or right side turn signal
turns on, the image in that direction is
displayed on the instrument cluster.
Off conditions
[ When the turn signal turns off, the
image on the instrument cluster will
turn off.
[ When the hazard warning flasher
is on, Blind-Spot View Monitor will
turn off, regardless of the turn signal
status.
[ When other important warning is
displayed on the instrument cluster,
Blind-Spot View Monitor may turn off.
% O L Q G 6 S R W 9 L H Z 0 R Q L W R U
Malfunction
When Blind-Spot View Monitor is not
working properly, or the cluster display
flickers, or the camera image does not
display properly, have the vehicle be
inspected by an authorized retailer of
Genesis Brand products.
: $ 5 1 , 1 *
[ 7 K H L P D J H V K R Z Q R Q W K H F O X V W H U P D \
differ from the actual distance of the
R E M H F W 0 D N H V X U H W R G L U H F W O \ F K H F N
W K H Y H K L F O H
V V X U U R X Q G L Q J V I R U V D I H W \
[ $ O Z D \ V N H H S W K H F D P H U D O H Q V F O H D Q
, I W K H O H Q V L V F R Y H U H G Z L W K I R U H L J Q
P D W H U L D O L W P D \ D G Y H U V H O \ D I I H F W
F D P H U D S H U I R U P D Q F H D Q G % O L Q G
6 S R W 9 L H Z 0 R Q L W R U P D \ Q R W R S H U D W H
S U R S H U O \
Page 487 of 690
7-73
07
Overtaking Acceleration Assist
Overtaking Acceleration Assist operates
when the turn signal indicator is turned
on while Smart Cruise Control is
operating, and the following conditions
are satisfied:
[ Your vehicle speed is above 40 mph
(60 km/h)
[ The hazard warning flasher is off
[ A vehicle is detected in front of your
vehicle
[ Deceleration is not needed to
maintain distance with the vehicle in
front
: $ 5 1 , 1 *
[ When the turn signal indicator is
W X U Q H G R Q Z K L O H W K H U H L V D Y H K L F O H
D K H D G W K H Y H K L F O H P D \ D F F H O H U D W H
W H P S R U D U L O \ 3 D \ D W W H Q W L R Q W R W K H
U R D G F R Q G L W L R Q V D W D O O W L P H V
[ 5 H J D U G O H V V R I W K H G U L Y L Q J G L U H F W L R Q
L Q \ R X U F R X Q W U \ 2 Y H U W D N L Q J
Acceleration Assist will operate when
W K H F R Q G L W L R Q V D U H V D W L V I L H G : K H Q
using the function in states with
G L I I H U H Q W G U L Y L Q J G L U H F W L R Q D O Z D \ V
check the road conditions at all
W L P H V
OJWEV071081
Turning on Smart Cruise Control
[ Press the Driving Assist () button
to turn on Smart Cruise Control. The
speed will be set to the current speed
on the cluster.
[ If there is no vehicle in front of you,
the set speed will be maintained, but
if there is a vehicle in front of you,
the speed may decrease to maintain
the distance to the vehicle ahead. If
the vehicle ahead accelerates, your
vehicle will travel at a steady cruising
speed after accelerating to the set
speed.
Information
If your vehicle speed is between 0-20 mph
(0-30 km/h) when you press the Driving
Assist (
) button, the Smart Cruise
Control speed will be set to 20 mph (30
km/h).
Page 515 of 690
7-101
07
% D V L F I X Q F W L R Q
Highway Driving Assist is designed to
help detect vehicles and lanes ahead,
and help maintain distance from the
vehicle ahead, maintain the set speed,
help center the vehicle in the lane while
driving on the highway (or motorway).
OJWEV071230
+ L J K Z D \ / D Q H & K D Q J H $ V V L V W L I H T X L S S H G
Highway Lane Change Assist function
helps change lanes to the direction the
driver slightly moves the turn signal
switch if the function judges that lane
change is possible.
OJWEV071231
Information
[ Highway Driving Assist is available
only on controlled access road of
certain highways.
ÃControlled access road indicates
roads with limited entrances and
exits that allow uninterrupted high
speed traffic flow. Only passenger
cars and motorcycles are allowed on
controlled access roads.
$ Y D L O D E O H K L J K Z D \
(Controlled access road)
USASelect Interstate Highwayand
U.S. (Federal) and
StateHighways
Canada Select Provincial and
TerritorialHighways
[ Additional highways may be expanded
by future navigation updates.
Information
Highway Driving Assist operates on
main roads of highways (or motorways),
and does not operate on interchanges or
junctions.
+ , * + : $ < ' 5 , 9 , 1 * $ 6 6 , 6 7
Page 521 of 690
7-107
07
Highway Lane Change Assist (if
equipped)
Display and control
You can see the status of the Highway
Lane Change Assist function operation
in the Driving Assist view on the cluster.
Refer to “View Modes” section in chapter
4.
Highway Lane Change Assist function
will be displayed as below depending on
the status of the function.
„Ready/Operating „Standby/Canceled
OJWEV071312EOJWEV071313E
(1) Highway Lane Change Assist
indicator
[ Green
on : Ready state
[ Green
blink : Operating state
[ Grey
on : Standby state
[ White
blink : Canceled state
(display only a certain time)
(2) Green lane line
The green lane line is displayed when
the function starts operating, and until
the vehicle steps on the lane line.(3) Green arrow and shade
The green arrow is displayed when a
certain amount of time has passed
after the function has started
operating, and until the lane change
has completed.
(4) Message
[ Message is displayed when the
function does not operate even
though the turn signal lever is used.
[ Message is displayed when
the function is cancelled while
operating.
Page 522 of 690
7-108
Driver Assistance System
OJWEV071270L
7 R W X U Q R Q + L J K Z D \ / D Q H & K D Q J H $ V V L V W
Highway Lane Change Assist function
will turn on when the following
conditions are satisfied.
[ The Driving Assist button or Lane
Driving Assist button is used to turn
on Highway Driving Assist.
[ The OK button is pressed on the
steering wheel while a message
asking to use Highway Lane Change
Assist is displayed on the cluster.
+ L J K Z D \ / D Q H & K D Q J H $ V V L V W U H D G \ W R
operate
While Highway Lane Change Assist
function is on, the function will be
ready to operate when all the following
conditions are satisfied:
[ Highway Driving Assist is operating
[ Lane Following Assist is operating
[ A vehicle in the rear area of your
vehicle is detected more than once
after the vehicle is turned on
[ Your vehicle speed is above 50 mph
(80 km/h)
[ Hands-off warning is not displayed on
the cluster
[ Hazard warning flasher is off
Information
[ While Lane Change Assist function
is turned on (indicator on), Lane
Following Assist will not cancel even
if the turn signal indicator or hazard
warning flasher is operating.
[ Lane Change Assist function turns
off automatically when driven in the
following road conditions:
-One driving lane
-A road with a intersection or
crosswalk ahead
-A road with no structure, such as a
medium strip, guardrails, etc.
-There is a pedestrian or cyclist on the
road ahead
[ When the function is in the ready state,
and vehicle speed is below 45 mph (75
km/h), the function will change to the
standby state.
: $ 5 1 , 1 *
: K H Q + L J K Z D \ / D Q H & K D Q J H $ V V L V W
I X Q F W L R Q W X U Q V R I I Z K L O H R S H U D W L Q J
V W H H U L Q J D V V L V W Z L O O E H W H P S R U D U L O \
F D Q F H O O H G $ O Z D \ V E H F D X W L R X V Z K L O H
G U L Y L Q J
Page 523 of 690
![GENESIS GV60 2023 User Guide 7-109
07
+ L J K Z D \ / D Q H & K D Q J H $ V V L V W R S H U D W L Q J
„Turn signal switch
ORG3EV071216L[1] : Center
Highway Lane Change Assist function
will operate, when you push th](/img/46/58826/w960_58826-522.png "GENESIS GV60 2023 User Guide 7-109
07
+ L J K Z D \ / D Q H & K D Q J H $ V V L V W R S H U D W L Q J
„Turn signal switch
ORG3EV071216L[1] : Center
Highway Lane Change Assist function
will operate, when you push th")
7-109
07
+ L J K Z D \ / D Q H & K D Q J H $ V V L V W R S H U D W L Q J
„Turn signal switch
ORG3EV071216L[1] : Center
Highway Lane Change Assist function
will operate, when you push the turn
signal lever up or down to the A or B
position while the function is in the ready
state (
indicator is green), and all of
the following conditions are satisfied:
[ The driver has his/her hand on the
steering wheel
[ There is no collision risk in the
direction of lane change
[ There is a single dotted lane line in the
direction of lane change
[ There are no Forward Collision-
Avoidance Assist and Blind Spot
Collision-Avoidance Assist warnings
[ The vehicle is driven in the middle of
the lane (should not be driving close
to one side of the lane)
[ The road you are driving on, or the
road you are about to change lane is a
road that the function can operate
Information
When the turn signal lever is placed at B
position for a certain period of time, the
green arrow will appear. At this time, even
when the lever is released and returns to
it’s original position (1), lane change will
still be assisted.
While lane change is being made by the
function, the turn signal indicator will
blink even when the turn signal lever is
not held, and the turn signal indicator will
turn off when lane change is complete.
+ L J K Z D \ / D Q H & K D Q J H $ V V L V W V W D Q G E \
Highway Lane Change Assist function
will be in the standby state when one of
the ready state condition is not satisfied,
or when entering or driving on one of the
following roads:
[ Road within a certain distance from
the tollgate on the main road of the
highway (or motorway)
[ The road ahead ends without an
interchange or junction
[ Road with sharp curves
[ Road with narrow lanes
[ Road that is under construction
+ L J K Z D \ / D Q H & K D Q J H $ V V L V W F D Q F H O
The function will be cancelled when:
[ The turn signal lever is turned on in
the opposite direction of lane change
[ The steering wheel is steered sharply
Page 592 of 690
7-178
Driver Assistance System
Parking function operation status
[ Smart Parking function
Operation status Turn signal
Under controlThe turn signal of the parking direction blinks until the first reverse
is complete.
[ Smart Parking function
Operation status 6 P D U W N H \ / ( ' + D ] D U G Z D U Q L Q J O L J K WTurn signal
Under controlGreen LED
continuously blinks-The turn signal of
the parking direction
blinks until the first
reverse is complete.
PauseRed LED
continuously blinksBlinks -
OffRed LED illuminates
for 4 seconds and
then turns offBlinks 3 times and
turns off-
CompleteGreen LED
illuminates for 4
seconds and then
turns offBlinks 1 time and
turns off-
ÃOperation status the hazard warning light and the turn signal light may not be
applicable based on the regulation of your country.
ÃIf the smart key is not within the operating range from the vehicle (approximately 13
ft. (4m)), the smart key LED will not illuminate or blink. Use the smart key within the
operating range.
Page 596 of 690
7-182
Driver Assistance System
6 P D U W ( [ L W
OJWEV071285L
(1) Press the Parking/View
() button when the vehicle is
stopped by depressing the brake
pedal. When the brake pedal is
released, Remote Smart Parking
Assist will automatically control
the steering wheel, vehicle speed
and gearshift.
(2) While Smart Exit function is
operating, if you do not hold
down the Parking/View button,
the vehicle will stop and function
control will pause. The function
will start operating again when the
Parking/View button is pressed
and held again.
(3) When the vehicle reaches the
target exit location, a message will
appear on the infotainment system
screen to inform you that exit is
complete.[ Smart Exit function will not operate
if the door is open or the seat belt is
not fastened.
[ Vehicle speed can be adjusted
by depressing the brake pedal
while Smart Exit function is
operating. However, the vehicle
does not accelerate even when the
accelerator pedal is depressed.
[ If exit is completed while
depressing the brake pedal, Smart
Exit function will complete with the
gear in D (Drive).
[ If exit is completed while depressing
the accelerator pedal, you must
take your foot off the accelerator
pedal once for the accelerator pedal
to operate.
[ If there is no vehicle operation such
as depressing the brake pedal or
accelerator pedal within 4 seconds
after exit is complete, the vehicle
will automatically shift to P (Park)
and engage EPB (Electronic Parking
Brake).
[ After Exit function is complete,
always check the surroundings
before driving.
Smart Exit operation status
Operation
statusTurn signal
Under
controlThe turn signal of the exit
direction blinks until the exit
is complete or Smart Exit is
cancelled.
ÃOperation status by the turn signal
may not be applicable based on the
regulation of your country.