parking brake GMC SIERRA 1993 Owners Manual

How To Use This Manual
These symbols are used on warning lights in your vehicle:
1-
Engine Coolant Temperature
BRAKE
Brake Battery
Charging
System
I RELEASE
Parking Brake Release
s Fuel
SHIFT
Shift Light
Engine Oil
Pressure
Low
Coolant
Here are some other symbols you may see:
Fuse
I II
Hood Release Lighter Horn
PO594
0-6
ProCarManuals.com

Featums & Contmls
Parking Brake ........................................................................\
.............................. 2-29
Parking Over Things That Burn
........................................................................\
. 2-33
Engine Exhaust
........................................................................\
........................... 2-34
Running Your Engine While You’re Parked
...................................................... 2-35
Four-wheel Drive
........................................................................\
........................ 2-36
Transfer Case
........................................................................\
.......................... 2-37
Front Axle Locking Feature
........................................................................\
.... 2-38
Windows
........................................................................\
....................................... 2-39
Horn
........................................................................\
.............................................. 2-41
Tilt Wheel
........................................................................\
..................................... 2-41
Multifunction Lever
........................................................................\
...................... 2-42
Turn Signal and Lane Change Indicator
....................................................... 2-43
Headlight High-Low Beam
........................................................................\
...... 2-44
Windshield Wipers
........................................................................\
................... 2-45
Windshield Washer
........................................................................\
.................. 2-46
Cruise Control
........................................................................\
.......................... 2-47
Headlights and Vehicle Lighting
........................................................................\
. 2-53
Mirrors
........................................................................\
.......................................... 2-59
Sun Visors
........................................................................\
................................... 2-61
Cigarette LighterlAshtrays
........................................................................\
........... 2-62
Storage Compartments
........................................................................\
............... 2-63
Instrument Cluster ........................................................................\
....................... 2-70
Warning and Indicator Lights
........................................................................\
.. 2-78
Gages
........................................................................\
....................................... 2-87
Camper Wiring Harness
........................................................................\
............. 2-91
Trailer Wiring Harness
........................................................................\
................ 2-91
2-2
ProCarManuals.com

Features & Controls
New Vehicle “Bmak-Rn99
1 NOTICE
Jr modern vehicle doesn’t need an elaborate “break-in.” But\
it will
perform better in the long run
if you follow these guidelines:
Keep your speed at 55 mph (88 kmlh) or less for the first 500 miles
(804 km).
Don’t drive at any one speed-fast or slow-for the first 500 miles
(804 km). Don’t make full-throttle starts.
Avoid making hard stops for the first 200 miles (322 km) or so.
During this time your new brake linings aren’t yet broken in. Hard
stops with new linings can mean premature wear and earlier
replacement. Follow this “breaking-in” guideline every time you get
new brake linings.
If you have
a 3500 HD Model, see “Parking Brake” in the Index.
Ignition Switch
Use your square key to start your vehicle. The square key lets you turn the
ignition switch
to five different positions:
6 1
RUN
KO404
Acc (Accessory): Acc lets you use things like the radio and the windshield
wipers when the engine
is off. To get into Acc, push in the key and turn it
toward you. Your steering wheel will remain locked, just as it was before you
inserted the key.
2-1 0
ProCarManuals.com

Automatic lLansmission
K2362
There are several different positions for your gear lever.
P (Park)
This locks your rear wheels. It’s the best position to use when you start your
engine because your vehicle can’t move easily.
* It is dangerous to get out of your vehicle if the shift lever is not fully
in
P (Park) with the parking brake firmly set. Your vehicle can roll.
Don’t leave your vehicle when the engine is running unless \
you have
to. If you have left the engine running, the vehicle can move
suddenly. You or others could be injured.
To be sure your vehicle
won’t move, when you’re on fairly level ground, always se\
t your parking brake and move the shift lever to
P (Park).
If you have four-wheel drive, your vehicle will be free to roll-even
if
your shift lever is in P (ParkLif your transfer case is in N (Neutral).
So, be sure the transfer cas s in a drive gear-not N {“eutral).
See “Shifting Into
P- I;’’ in tne 3ex. If you are parking on a hill, or
if you’re pulling a traller, also see “Parking on Hills” \
or “Towing a
Trailer’’ in the Index.
2-2 1
ProCarManuals.com

2 (Second Gear)-Press the clutch pedal as you let up on the
accelerator pedal and shift into
2. Then, slowly let up on the clutch
pedal as you press the accelerator pedal.
3, 4 and 5 (Third, Fourth and Fifth Gears)-Shift into 3, 4 and 5 the
same way you do for
2. Slowly let up on the clutch pedal as you press
the accelerator pedal.
To Stop -Let up on the accelerator pedal and press the brake pedal. Just
before the vehicle stops, press the clutch pedal and the brake pedal, and
shift to Neutral.
N (Neutral)-Use this position when you start or idle your engine,
R (Reverse)-To back up, press down the clutch pedal and shift into R. Let
up on the clutch pedal slowly while pressing the accelerator p\
edal.
Shift to
R (Reverse) only after your vehicle is stopped. Shifting to R
(Reverse) while your vehicle is moving could damage your transmission
Also, use Reverse, along with the parking brake, for parking your vehicle.
FivemSpeed Manual 7Fansmission
(With Low Gear)
e
K2464
2-25
ProCarManuals.com

To Stop-Let up on the accelerator pedal and press the brake pedal\
. Just
before the vehicle stops, press the clutch pedal and the brake pedal, and
shift to
N (Neutral).
N (Neutral)-Use this position when you start or idle your engine.
R (Reverse)-To back up, press the clutch pedal and shift into R. Let up on
the clutch pedal slowly while pressing the accelerator pedal. If you shift from
OD into R, the shift lever must first be placed in the N (Neutral) position
centered between
2 and 3 prior to shifting into R.
NOTICE I
Shift to R (Reverse) only after your vehicle is stopped. Shifting to R
(Reverse) while vour vehicle is movina could damaae vour transmission.
- -
Also, use Reverse, along with the parking brake, for parking your ve\
hicle.
Shift Light
I K2317
If you have a manual transmission, you may have a SHIFT light. This light
will show you when to shift to the next higher gear for best fuel economy.
When this light comes on, you can shift to the next higher gear
if weather,
road and traffic conditions let you. For the best fuel economy, accelerate
slowly and shift when the light comes on.
While you accelerate, it is normal for the light to go on and
off if you quickly
change the position
of the accelerator. Ignore the SHIFT light when you
downshift.
2-27
ProCarManuals.com

Parking Brake
K2221
To set the parking brake:
Hold the regular brake pedal down with your right foot. Push down the
parking brake pedal with your left
foot. If the ignition is on, the brake system
warning light will come
on.
To release the parking brake:
Hold the regular brake pedal down. Pull the lever marked RELEASE.
Driving with the parking brake on can cause your rear brakes to overheat.
You may have to replace them, and you also da other p;
of I
your vehicle.
’ ‘
If you are on a hill:
See “Parking on Hills” in the Index. That part shows how to turn your front
wheels.
If you are towing a trailer and are parking on any hill:
See “Towing a Trailer” in the Index. That part shows what to do first to keep
the trailer from moving.
2-29
ProCarManuals.com

Features & Controls
Propshaft Brake Burnish Procedure
If you have a 3500 HD Model, it is recommended that the propshaft mounted
parking brake be burnished as part of the new vehicle break in. The parking
brake
will work best after it has been burnished following these instructions.
Make
10 stops, using the parking brake foot pedal, from 20 mph (32 k\
m/h)
about 2
112 miles (4 km) apart. In between stops, drive the vehicle at 20
mph (32 kmlh).
Torque Lock
The parking brake should be set first whenever leaving the dri\
ver’s seat. If
you are parked on a hill and the transmission is placed in P (Park) before
the parking brake is set, the weight of the vehicle may put too much force
on the parking pawl in the transmission.
It may be difficult to pull the selector
lever out of
P (Park). This is called “torque lock.” To prevent this, the parking
brake should be set
BEFORE moving the selector lever to P (Park).
When preparing
to move the vehicle, the selector lever should be moved out
of
P (Park) BEFORE releasing the parking brake. Set the parking brake first,
then release the transmission from
P (Park), even on level surfaces.
If “torque lock” does occur, you may have to have another vehicle nudge
your vehicle uphill a little
to take some of the pressure off the transmission
while you pull the selector lever out of
P (Park).
Shifting Into P (Park) (Automatic Transmission Models Only)
1 CAUTION
It can be dangerous to get out of your vehicle if the shift lever is not
fully in
P (Park) with the parking brake firmly set. Your vehicle can
roll.
If you have left the engine running, the vehicle can move suddenly.
You
or others could be injured. TO be sure your vehicle won’t move,
when you’re
on fairly level ground, use the steps that follow.
If you have four-wheel drive and your transfer case is in N (Neutral),
your vehicle will be free to roll-even if your shift lever is in P
{Park). So, be sure the transfer case is in a drive gear-not N
(Neutral).
If you are parking on a hill, or if you’re pulling a trailer, also see
“Parking on Hills9’ or “Towing a Trailer” in the Index. I
2-30
ProCarManuals.com

Steering Column Shift Lever
1. Hold the brake pedal down with your right foot and set the parking
brake.
2. Move the shift lever into the P (Park) position like this:
Pull the lever toward you.
~- - --
w KL" I"
Move the lever up as far as it will go.
3. If you have four-wheel drive, be sure the transfer case is in a drive
4. Move the ignition key to LOCK.
5. Remove the key and take it with you. If you can walk away from your
vehicle with the ignition key
in your hand, your vehicle is in P (Park).
gear-not
in N (Neutral).
2-31
ProCarManuals.com

Leaving Your Vehicle With the Engine Running (Automatic
Transmission Models Only)
I CAUTION
A It can be dangerous to leave your vehicle with the engine running. 1
1 Your vehicle could move suddenly if the shift lever is not fully in P
(Park) with the parking brake firmly set.
If you have a four-wheel drive with a manual transfer case sh\
ift lever
and your transfer case
is in N (Neutral), your vehicle will be free to
roll, even
if your shift lever is in P (Park). So be sure the transfer
case is in a drive gear-not in
N (Neutral).
And,
if you leave the vehicle with the engine running, it could
overheat and even catch fire. You or others could be injured. Don’t
leave your vehicle with the engine running unless you have to.\

If you have to leave your vehicle with the engine running, be su\
re your
vehicle
is in P (Park) and your parking brake is firmly set, before you leav\
e
it. If you have a four-wheel drive, be sure that the transfer case i\
s in a drive
gear-not in
N (Neutral).
After you’ve moved the shift lever into the
P (Park) position, hold the regular
brake pedal down. Then, see
if you can move the shift lever away from P
(Park) without first pulling it toward you.
If you can, it means that the shift lever wasn’t fully locked into
P (Park).
Parking Your Vehicle (Manual Transmission Models Only)
Before you get out of your vehicle, put your manual transmission in R
(Reverse) and firmly apply the parking brake.
If you have four-wheel drive, be sure your transfer case is in a\
drive gear.
Your vehicle could roll
if it isn’t.
If you are parking on a hill, or if your vehicle is equipped to tow a trailer,
see “Parking on Hills” or “Towing a Trailer” in the\
Index.
2-32
ProCarManuals.com