tires GMC SIERRA 1994 Owner's Guide

Dual lire Operation
If your vehicle has dual rear wheels, the outer tire will usually wear faster
than the inner tire. Your tires will wear more evenly and last longer
if you
rotate the tires periodically. If you’re going to be doing a lot of driving on
high-crown roads,
you can reduce tire wear by adding 5 psi (35 kPa) to the
tire pressure in the outer tires. Be sure to return to the recommended
pressures when
no longer driving under those conditions.
Buying New Tires
To find out what kind and size of tires you need, look at the
CertificationRire label.
The tires installed on your vehicle when it was new had
a Tire Performance
Criteria Specification
(TPC Spec) number on each tire’s sidewall. When you
get new tires, get ones with that same TPC Spec number. That way, your
vehicle will continue
to have tires that are designed to give proper
endurance, handling, speed rating, traction, ride and other things during
normal service on your vehicle. If your tires have an all-season tread
design, the TPC number will be followed by a
“MS” (for mud and snow).
If you ever replace your tires with those not having
a TPC Spec number,
make sure they are
the same size, load range, speed rating and construction
type (bias, bias-belted or radial) as your original tires.
6-76
ProCarManuals.com

Uniform Tire Quality Grading
The following information relates to the system developed by the Un\
ited
States National Highway Traffic Safety Administration which grade\
s tires
by treadwear, traction and temperature performance. (This applie\
s only to vehicles sold in the United States.)
Treadwear
The treadwear grade is a comparative rating based on the wear rate of the
tire when tested under controlled conditions on a specified gov\
ernment test
course. For example, a tire graded
150 would wear one and a half (1 1/2)
times as well on the government course as a tire graded 100. The relative
performance of tires depends upon the actual conditions of their use,
however, and may depart significantly from the norm due to variations in
driving habits, service practices and differences in road charac\
teristics and
climate.
Traction -A, B, C
The traction grades, from highest to lowest are: A, B, and C. They represent
the tire’s ability to stop on wet pavement as measured under controlled
conditions on specified government test surfaces of asphalt and concrete. A
tire marked
C may have poor traction performance.
Warning: The traction grade assigned to this tire is based on braking
(straight-ahead) traction tests and does not include cornering \
(turning)
traction.
Temperature - A, B, C
The temperature grades are A (the highest), B, and C, representing the tire’s
resistance to the generation of heat and its ability to dissipate heat when
tested under controlled conditions on a specified indoor laborat\
ory test
wheel. Sustained high temperature can cause the material of the tire to
degenerate and reduce tire life, and excessive temperature can \
lead to
sudden.tire failure. The grade
C corresponds to a level of performance
which all passenger car tires must meet under the Federal Motor Vehicle
Safety Standard
No. 109. Grades B and A represent higher levels of
performance on the laboratory test wheel than the minimum required by
law.
Warning: The temperature grade for
this tire is established for a tire that is
properly inflated ad not overloaded. Excessive speed, underinflation, or
excessive loading, either separately or in combination, can cause heat
buildup and possible tire failure.
These grades are molded on the sidewalls
of passenger car tires.
6-77
ProCarManuals.com

While the tires available as standard or optional equipment on General
Motors vehicles may vary with respect
to these grades, all such tires meet
General Motors performance standards and have been approved for use on
General Motors vehicles. All passenger type
(P Metric) tires must conform
to Federal safety requirements in addition to these grades.
Wheel Alignment and Tire Balance
The wheels on your vehicle were aligned and balanced carefully at the
factory
to give you the longest tire life and best overall performance.
In most cases,
you will not need to have your wheels aligned again.
However,
if you notice unusual tire wear or your vehicle pulling one way or
the other, the alignment may need to be reset. If
you notice your vehicle
vibrating when driving on
a smooth road, your wheels may need to be
rebalanced.
Wheel Replacement
Repla@ Zm wheel that is bent, cracked or badly rusted. If wheel nuts keep
coming loose, the wheel, wheel bolts, and wheel nuts should be replaced. If
the wheel leaks air, replace it (except some aluminum wheels, which can
sometimes be repaired). See your GM dealer if any of these conditions exist.
Your dealer will know
the kind of wheel you need.
Each new wheel should have the same load carrying capacity, diameter,
width, offset, and be mounted the same way as the one it replaces.
If you need to replace any of your wheels, wheel bolts, or wheel nuts,
replace them only with new GM original equipment parts. This way,
you
will be sure to have the right wheel, wheel bolts, and wheel nuts for your
GM model.
6-78
ProCarManuals.com

NOTICE:
The wrong wheel can also cause problems with bearing life,
brake cooling, speedometer/odometer calibration, headlight aim,
bumper height, vehicle ground clearance, and tire or tire chain
clearance to the body and chassis.
Used Replacement Wheels
Tire Chains
NOTICE:
If your vehicle has dual wheels or LT26Y75R16 size tires, don’t
use tire chains; they can damage your vehicle.
If you don’t have
dual wheels or
if you have a tire size other than LT265/75R16,
use tire chains only where legal and only when you must. Use
only SAE Class “S” type chains that are the proper size for your
tires. Install them on the tires of the rear axle. Tighten them as
tightly
as possible with the ends securely fastened. Drive slowly
and follow the chain manufacturer’s instructions.
If you can
hear the chains contacting your vehicle, stop and retighten them.
If the contact continues, slow down until it stops. Driving too
fast with chains on will damage your vehicle.
6-79
ProCarManuals.com

Aluminum Wheels (If So Equipped)
Your aluminum wheels have a protective coating similar to the painted
surface
of your vehicle. Don’t use strong soaps, chemicals, chrome polish,
abrasive cleaners or abrasive cleaning brushes on them because you could
damage this coating. After rinsing thoroughly, a wax may be applied.
NOTICE:
If you have aluminum wheels, don’t use an automatic vehicle
wash that has hard silicon carbide cleaning brushes. These
brushes can take
off the protective coating.
White Side wall Tires
Your GM dealer has a GM White Sidewall Tire Cleaner. You can use a stiff
brush with the cleaner.
Weatherstrips
Silicone grease on weatherstrips will make them last longer, seal better, and
not stick or squeak. Apply silicone grease with
a clean cloth at least every
six months. During very cold, damp weather more frequent application may
be required. (See “Recommended Fluids
& Lubricants” in the Index.)
Sheet Metal Damage
If your vehicle is damaged and requires sheet metal repair or replacement,
make sure
the body repair shop applies anti-corrosion material to the parts
repaired or replaced
to restore corrosion protection.
Foreign Material
Calcium chloride and other salts, ice melting agents, road oil and tar, tree sap,
bird droppings, chemicals from industrial chimneys, and other foreign matter
can damage your vehicle’s finish
if they remain on painted surfaces. Use
cleaners that are marked safe for painted surfaces to remove foreign matter.
Finish Damage
Any stone chips, fractures or deep scratches in the finish should be repaired
right away. Bare metal will corrode quickly and may develop into a major
repair expense.
Minor chips and scratches can be repaired with touch-up materials available
from your dealer or other service outlets. Larger areas of finish damage can
be corrected
in your dealer’s body and paint shop.
6-86
ProCarManuals.com

Underbody Maintenance
Chemicals used for ice and snow removal and dust control can collect on
the underbody. If these are not removed, accelerated corrosion (rust) can
occur on the underbody parts such as fuel lines, frame,
floor pan, and
exhaust system even though they have corrosion protection.
At least every spring, tlush these materials from the underbody
with plain
water. Clean any areas where mud and other debris can collect. Dirt packed
in closed areas of the frame should be loosened before being flushed. Your
dealer or an underbody vehicle washing system can do this for you.
Chemical Paint Spotting
Some weather and atmospheric conditions can create a chemical fallout.
Airborne pollutants can fall upon and attack painted surfaces on your
vehicle. This damage can take two forms: blotchy, ringlet-shaped
discolorations, and small irregular dark spots etched into the paint surface.
Although no defect
in the paint job causes this, GM will repair, at no charge
to the owner, the surfaces of new vehicles damaged by this fallout condition
within 12 months or 12,000 miles (20
000 km) of purchase, whichever
comes first.
This applies
only to materials manufactured and sold by General Motors.
Bodies, body conversions or equipment
not made or sold by General Motors
are not covered.
Appearance Care Materials Chart
PART NO.
1050172
I050 173
1050174 1050214
1050244
SIZE
16 oz. (0.473L)
16 oz. (0.473L)
I6
oz. (0.473L)
32
oz. (0.946L)
16 oz. (0.473L)
PRODUCT USAGE
Tar and Road Oil
Removes old
Remover waxes, polishes,
tar and road
oil
Chrome Cleaner Removes rust and
and Polish corrosion
on
chrome and
stainless steel
White Sidewall
Tire Cleaner
Vinyl Leather
Cleaner
Fabric Cleaner Cleans
white and
black tires
Spot and stain
removal on
leather or
vinyl
Spot and stain
removal on cloth
and fabric
6-87
ProCarManuals.com

PART NO.
I050427
1050429
I050729
1051055 1051398
1052870
105020
1
SIZE
23 oz. (0.680L)
6 lbs. (2.72 kg)
8 oz. (0.237L)
16 02. (0.473L)
8 oz. (0.237L)
16 oz. (0.473L)
16 oz. (0.473L)
PRODUCT
Glass Cleaner
Multi-Purpose Powder Cleaner
Vinyl Top Cleaner
Preservatone Spot Lifter
Wash-Wax (conc.)
Magic Mirror
Cleaner-Polish
Vehicle Identification Number (VIN)
USAGE
Glass cleaning
and spot cleaning
on vinyls
Cleans
vinyl and
cloth
on door
trim, seats, and
carpet-also tires
and mats.
Cleaning
of vinyl
tops
Vinyl top dressing
Spot and stain
removal
on cloth
and fabric
Exterior wash
Exterior cleaner
and polish
This is
the legal identifier for your vehicle. It appears on a plate in the front
corner
of the instrument panel, on the driver’s side. You can see it if you
look through the windshield from outside your vehicle. The VIN also
appears on the Vehicle Certification and Service Parts labels and the
certificates
of title and registration.
6-88
ProCarManuals.com

18. EVAPORATIVE CONTROL SYSTEM (ECS) INSPECTION* -
Check all fuel and vapor lines and hoses for proper hookup, routing,
and condition. Check that
the purge valve works properly, if equipped.
Replace as needed.
19.
SHIELDS AND UNDERHOOD INSULATION
INSPECTIONAV
- Inspect shields and underhood insulation for
damage or looseness. Adjust or replace as required.
system installation
to see that gaskets are sealed properly and all hose
connections, fasteners, and other components are tight. Also check to
be sure that the air cleaner housing is properly seated, that
the cover fits
tightly, and
the wing nuts are tight. Tighten connections and fasteners
or replace damaged parts
as required.
20. AIR INTAKE SYSTEM INSPECTIONAV - Check the air intake
2 1. THERMOSTATICALLY CONTROLLED ENGINE COOLING
FAN INSPECTIONAV
- (If so equipped.) Inspect all hoses and
ducts for proper hook-up. Be sure the valve works properly.
22. EXHAUST PRESSURE REGULATOR VALVE INSPECTION”
- Check that the valve works properly. Correct any binding. Inspect
hoses for cracks, chafing
or decay. Replace parts as needed.
23. TIRE AND WHEEL ROTATION AND INSPECTION - For
proper wear and maximum tire life, rotate tires at the first
6,000 miles
( 10 000 kilometers) for Schedule I (+) or 7,500 miles (1 2 500
kilometers) for Schedule IT (0) and then every 15,000 miles (25 000
kilometers) thereafter. Follow the instructions and patterns shown in
Section 6. Check tires for uneven wear or damage. If irregular or
premature wear is apparent, check wheel alignment. Also, check or
damaged wheels. See “Tires”
in the Index for more information.
For dual wheels, whenever the vehicle, wheels, or fasteners are new,
have the wheel fastener torque set at the first
100, 1,000 and 6,000
miles (1 60, 1600 and 10 000 km).
Block the tires opposite those being removed to keep the vehicle from
rolling.
‘i: An Emission Control Service
ANoise Emission Control Service
VApplicable only to vehicles sold
in the United States
7-21
ProCarManuals.com

Owner Checks and Services
Listed below are owner checks and services which should be made at the
time period specified to help ensure proper safety, emission performance,
and dependability
of your vehicle.
Be sure any necessary repairs are completed at once. Whenever any fluids
or lubricants are added to your vehicle, make sure they are
the proper ones,
as shown
in this Section.
At Least Once a Month
Tire inflation pressure check - Check the tires for proper inflation. If
they are low, inflate them to the level specified on the Certification/Tire
label. See “Loading Your Vehicle” or “Inflation-Tire Pressure”
in the Index.
At Least Once a Year
Key lock cylinder lubrication - Lubricate key lock cylinders with engine
oil. See
the “Recommended Fluid and Lubricants” chart in this section.
Transmission neutral or clutch start switch operation -
1. Before you start, be sure you have enough room around the vehicle.
2. Firmly apply both the manual parking brake and the regular brake. See
“Brakes” and “Parking Brake”
in the Index. Do not use the accelerator
pedal.
3. Be ready to turn off the engine immediately if it starts.
4. On automatic transmission vehicles, try to start the engine in each gear.
The starter should work only
in “P’ (Park) or “N” (Neutral).
On manual transmission vehicles, put the shift lever
in “N” (Neutral), push
the clutch down halfway, and try to start the engine. The starter should work
only when the clutch
is pushed down all the way to the floor.
Steering column lock operation - While parked, try to turn the key to
LOCK in each gear shift position.
With an automatic transmission, the key should
turn to LOCK only when
the gear shift
is in “P” (Park).
7-23
ProCarManuals.com

C
Camper Wiring Harness ........................................... 2-83
Capacities/Specification Charts ..................................... 6-91
CarbonMonoxide
............................................... 2-33
CargoLamp
.................................................... 2-52
Cassette Tape Player (see “Audio Systems”
)
Catalyticconverter .............................................. 6-64
Certificationire Label
........................................... 6-65
Changing a Flat Tire
......................................... 5-26, 5-32
Chemical Paint Spotting
........................................... 6-87
Child Restraints (See “Safety Belts”)
CHMSLFeedWire
.............................................. 2-82
Cigarette LightedAshtrays
..... ................................... 2-52
Circuit Breakers (See “Fuses”)
Cleaning
Finishcare
.................................................. 6-85
Glass
....................................................... 6-84
Insideofvehicle
.............................................. 6-81
Instrumentpanel. Top
.......................................... 6-83
Outsideofvehicle
............................................. 6-84
Special Problems
.............................................. 6-82
VinylorLeather
.............................................. 6-83
Wheels and Tires
.............................................. 6-86
Windshield
.................................................. 6-84
Clock
......................................................... 3-18
AM-FM Stereo Audio System with Cassette Deck
................... 3-11
AM-FM Stereo Audio System with Cassette Deck and Equalizer
... 3-14. 3-18
Conversion to Chassis Cab
........................................ 6-70
Coolant (See “Engine”)
Cooling System Capacity
.......................................... 5-17
Crankcase Capacity
.............................................. 6-93
Increasespeed
............................................... 2-46
CruiseControl
.................................................. 2-44
EraseSpeedMemory .......................................... 2-48
OnHills
..................................................... 2-48
Passing
..................................................... 247
Reducespeed
................................................ 2-47
Resume
..................................................... 2-46
Set
......................................................... 2-45
ToGetOutOf
................................................ 2-48
Customer Assistance for the Hearing or Speech Impaired
................. 8-3
Customer Satisfaction Procedure
..................................... 8-2
Daytime Running Lights (Canada Only)
......................... 2.50, 2.75
Indicator Light
.......................................... 2.50. 2.75
Diesel Fuel (See “Fuel”)
DomeLights
.................................................... 2-51
Doors
.......................................................... 2-7
Locks ........................................................ 2-5
Driving Across an Incline
............................................. 4-21
After Off-Road Driving
........................................ 4-22
2
ProCarManuals.com