check engine GMC SIERRA 1998 Repair Manual

Long TriplHighway Maintenance Schedule -- -asoline Engines 1
45,000 Miles (75 000 km) (Continued)
0 Check readfront axle fluid level and add fluid as needed. Check constant
0 Vehicles With GVWR Above 8,500 lbs. Only: Inspect shields and underhood
velocity
joints and axle seals for leaking. (See footnote
:c*.)
insulation for damage or looseness. Adjust or replace as required.
This is a Noise Emission Control Service. Applicable only to \:elzicle.s
sold in the United States.
0 Rotate tires. See “Tire Inspection and Rotation” in the Index for proper
rotation pattern and additional information. (See footnote
+.)
50,000 Miles (83 000 km)
0 Change automatic transmission fluid and filter if the vehicle’s GVWR is over
8600 lbs. or if the vehicle is mainly driven under one or more of these conditions:
- In heavy city traffic where the outside temperature regularly reaches
MILEAGE
90°F (32°C) or higher.
- In hilly or mountainous terrain.
- When doing frequent trailer towing.
- Uses such as found in taxi, police or delivery service.
If you do not use ?:out* vehicle under my of these conditions,
change the fluid nnd.filter at
100,000 miles (I 66 000 km).
Manual transmission fluid doesn’t require change.
7-32
ProCarManuals.com

Long Tripmighway Maintenance Schedule -- Gasoline Engines I
52,500 Miles (87 500 km)
0 Change engine oil and filter (or every 12 months, whichever occurs first).
0 Lubricate chassis components (or every 12 months, whichever occurs first).
0 Check readfront axle fluid level and add fluid as needed. Check constant
0 Rotate tires. See “Tire Inspection and Rotation” in the Index for proper
An Emissimz Control Service. MILEAGE
(See footnote #.)
velocity joints and axle seals for leaking. (See footnote **.)
rotation pattern and additional information. (See footnote +.)
60,000 Miles (100 000 km)
0 Change engine oil and filter (or every 12 months, whichever occurs first).
AH Emission Contmi Service.
0 Lubricate chassis components (or every 12 months, whichever occurs first).
0 Check readfront axle fluid level and add fluid as needed. Check constant
0 For Two-Wheel-Drive vehicles only: Clean and repack the front wheel
0 Rotate tires. See “Tire Inspection and Rotation” in the Index for proper
(See footnote
#.)
velocity
joints and axle seals for leaking. (See footnote :$*.)
bearings (or at each brake relining, whichever occurs first).
rotation pattern and additional information. (See footnote
+.)
(Continued)
I DATE I
SERVICED BY
7-33
ProCarManuals.com

I Lono Tripmighway Maintenance Schedule -- Gasoline Engines I
-
,000 Miles (100 000 km) (Continued)
An Emission Control Service.
0 Inspect engine
accessory drive belt.
0 Replace fuel filter. An Em.issiorz Control Service. (See footnote?.)
0 Inspect fuel tank, c.ap and lines for damage or leaks. inspect fuel cap gasket
for any damage. Replace parts as needed.
An Emission Control Service. (See footnote?.)
insulation for damage or looseness. Adjust or replace
as required.
This is a Noise Emission Control Service. Applical?lc) only to vehicles
sold in the United States.
the service manual.
An Emission Control Service. (See footnote?.)
17 Conduct evaporative control system inspection. Check all fuel and vapor lines
and hoses for proper hook-up, routing and condition. Check that the purge
valve works properly, if equipped. Replace as needed.
An Emission Control Sen,ic:e. (See footnote?.)
0 Vehicles With GVWR Above 8,500 lbs. Only: Inspect shields and underhood
0 Conduct Exhaust Gas Recirculation (EGR) system inspection as described in
7-34
ProCarManuals.com

Long Tripmighway Maintenance Schedule -- Gasoline Engines I
67,500 Miles (112 500 km)
~~ ~ ~~
17 Change engine oil and filter (or every 12 months, whichever occurs first).
0 Lubricate chassis components (or every 12 months, whichever occurs first).
(See footnote
#.)
0 Check readfront axle fluid level and add fluid as needed. Check constant
velocity joints and axle seals for leaking. (See footnote
**.)
Rotate tires. See “Tire Inspection and Rotation” in the Index for proper
rotation pattern and additional information. (See footnote
+.)
An Emission Control Service. MI1,EAGE
75,000 Miles (125 000 km)
0 Change engine oil and filter (or every 12 months, whichever occurs first).
0 Lubricate chassis components (or every 12 months, whichever occurs first).
An Emissiol? Cont1-01 Service.
(See footnote #.)
0 Check rearlfront axle fluid level and add fluid as needed. Check constant
0 Vehicles With GVWR Above 8,500 Ibs. Only: Inspect shields and underhood
velocity
joints and axle seals for leaking. (See footnote
*i“.)
insulation for damage or looseness. Adjust or replace as required.
This is LI Noise Emission Control Service. Appliurble only to r?ellicles
sold in the United States.
0 Rotate tires. See “Tire Inspection and Rotation” in the Index for proper
rotation pattern and additional information. (See footnote
+.)
7-35
ProCarManuals.com

Long Tripmighway Maintenance Schedule -- Gasoline Engines I
82,500 Miles (I37 500 km) DATE I
Change engine oil and filter (or evl_-,r I2 months, whichever occurs first).
An Emission Control Service.
Lubricate chassis components (or every 12 months, whichever occurs first).
(See footnote
#.)
Check rear/front axle fluid level and add fluid as needed. Check constant
velocity joints and axle seals for leaking. (See footnote
*4‘.)
Rotate tires. See “Tire Inspection and Rotation” in the Index for proper
rotation pattern and additional information. (See footnote
+.)
90,000 Miles (150 000 km)
0
0
0
Change engine oil and filter (or every 12 months, whichever occurs first).
An Emission Control Service.
Lubricate chassis components (or every 12 months, whichever occurs first).
(See footnote
#.)
Check redfront axle fluid level and add fluid as needed. Check constant
velocity joints and axle seals for leaking. (See footnote
**.)
For Two-Wheel-Drive vehicles only: Clean and repack the front wheel
bearings (or at each brake relining, whichever occurs first).
Replace fuel filter.
AI? Emissiorz Cnrztrol &r\Vice. (See footnote?.)
I MILEAGE ACTUAL I SERVICEDBY I
DATE I
7-36
ProCarManuals.com

Long Tripmighway Maintenance Schedule -- GasolineEngcI
0 Vehicles With GVWR Above 8,500 Ibs. Only: Inspect shields and underhood
insulation for damage or looseness. Adjust or replace
as required.
This is a Noise Ernissiorz Co?ztrol Service. Applicurble orzly to vehicles
sold in
the United States.
0 Rotate tires. See “Tire Inspection and Rotation” in the Index for proper
rotation pattern and additional information. (See footnote
+.)
97,500 Miles (162 500 km)
0 Change engine oil and filter (or every 12 months, whichever occurs first).
0 Lubricate chassis components (or every 12 months, whichever occurs first).
0 Check readfront axle fluid level and add fluid as needed. Check constant
0 Rotate tires. See “Tire lnspection and Rotation.’ in the Index for proper
An Emission Control Service.
(See footnote #.)
velocity joints and axle seals for leaking. (See footnote ‘%‘:’.)
rotation pattern and additional information. (See footnote +.)
DATE
MILEAGE
1 SERVICED BY: I
7-37
ProCarManuals.com

Part B: Owner Checks and Services
Listed below are owner checks and services which
should be performed at the intervals specified
to help
ensure
the safety, dependability and emission control
performance
of your vehicle.
Be sure any necessary repairs are completed at once.
Whenever
any fluids or lubricants are added to your
vehicle, make sure they are the proper ones.
as shown in
Part D.
At the First 100, 1,000 and 6,000 Miles
(160,1600 and 10 000 km)
For vehicles with dual wheels, check dual wheel nut
torque. For proper torque, see “Wheel Nut Torque” in
the Index.
At Each Fue-
Engine Oil Level Check
Check the engine oil level and add the proper oil if
necessary. See “Engine Oil” in the Index for
further details.
Engine Coolant Level Check
Check the engine coolant level and add DEX-COOL@
coolant mixture if necessary. See “Engine Coolant” in
the Index for further details.
Windshield Washer Fluid Level Check
Check the windshield washer fluid level in the
windshield washer tank and add the proper fluid
if
necessary. See ”Windshield Washer Fluid” in the Index
for ElIrther details.
At Least Once a Month
Tire Inflation Check
Make sure tires are inflated to the correct pressures.
See “Tires”
in the Index for further details.
Cassette Deck Service
Clean cassette deck. Cleaning should be done every
50 hours of tape play. See “Audio Systems“ in the
Index for further details.
ProCarManuals.com

At Least Twice a Year Manual Transmission Check
Restraint System Check
Make sure the safety belt reminder light and all your
belts, buckles, latch plates, retractors and anchorages are
working properly. Look
for any other loose or damaged
safety belt system parts.
If you see anything that might
keep a safety belt system from doing its
job, ha\:e it
repaired. Have any torn or frayed safety belts replaced.
Also look for any opened or broken
air bag coverings,
and have them repaired or replaced. (The air
bag system
does
not need regular maintenance.)
Wiper Blade Check
Inspect wiper blades for wear or cracking. Replace blade
inserts that appear worn
or damaged or that streak or
miss areas
of the windshield. Also see "Wiper Blactes,
Cleaning"
in the Index.
Air Cleaner Filter Restriction Indicator Check
Your vehicle has an indicator on the engine that lets you
know when the air cleaner filter
is dirty and needs to be
changed. Check indicator at least twice
a year or when
your
oil is changed. See "Air Cleaner" in the Index for
more information. Inspect your air cleaner filter
restriction indicator more often
if the vehicle is used in
dusty areas or under off road conditions. Check the transmission fluid
level; add
if needed. See
"Manual Transmission"
in the Index. Check for leaks.
A fluid loss may indicate a problem. Have the system
inspected and repaired
if needed.
Automatic Transmission Check
Check the transmission fluid level: add if needed. See
"Automatic Transmission"
in the Index. A fluid loss may
indicate a problem. Check the system and repair
if needed.
Hydraulic Clutch System Check
Check the fluid level in the clutch reservoir. See
"Hydraulic Clutch Fluid"
in the Index. A fluid loss in
this system could indicate a problem. Have the system
inspected and repaired at once.
At Least Once a Year
Key Lock Cylinders Service
Lubricate the key lock cylinders with the lubricant
specified
in Part D.
7-41
ProCarManuals.com

Body Lubrication Service
Lubricate all fuel doors, body hood, body door hinges,
body door hinge
pins, hood latch assembly, pivots,
spring anchor, release pawl, tailgate hinges, and tailgate
handle pivot points, latch bolt, locks and folding seat
hardware. Part
D tells you what to use. More frequent
lubrication may be required when exposed to
a corrosive
environment.
Starter Switch Check
When you are doing this check, the vehicle could
move suddenly.
If it does, you or others could be
injured. Follow the steps below.
3. On automatic transmission vehicles, try to start the
engine
in each gear. The starter should work only in
PARK
(P) or NEUTRAL (N). If the starter works in
any other position, your vehicle needs service.
On manual transmission vehicles, put the shift lever
in NEUTRAL (N), push the clutch down halfway
and try to start the engine. The starter should work
only when the clutch is pushed down all the way
to
the floor. If the starter works when the clutch isn’t
pushed
all the way down, your vehicle needs service.
Brake-Transmission Shift Interlock (BTSI) Check
(Automatic Transmission)
1. Before you start, be sure you have enough room
around the vehicle.
2. Firmly apply both the parking brake (see “Parking
Brake” in the Index
if necessary) and the
regular brake.
NOTE: Do not use the accelerator pedal, and be
ready to
turn off the engine immediately if it starts.
When you are doing this check, the vehicle could
move suddenly. If
it does, you or others could be
injured. Follow the steps below.
I. Before you start, be sure you have enough room
around the vehicle. It should be parked
on a
level surfxe.
7-42
ProCarManuals.com

2.
3.
Firmly apply the parking brake (see “Parking Brake”
in the Index if necessary).
NOTE: Be ready to apply the regular brake
immediately
if the vehicle begins to move.
With the engine off, turn the key to the
RUN
position, but don’t start the engine. Without applying
the regular brake, try to move the shift lever
out of
PARK
(P) with normal effort. If the shift lever
moves out of PARK (P), your vehicle’s BTSI
needs service.
Ignition Transmission Lock Check
While parked, and with the parking brake set, try to turn
the ignition key to
LOCK in each shift lever position.
With an automatic transmission, the key should turn
to
LOCK only when the shift lever is in PARK (P).
0 With a manual transmission, the key should
turn to
LOCK only when the shift lever is in
REVERSE (R).
On vehicles with a key release button, try to
turn the key
to
LOCK without pressing the button. The key should
turn to
LOCK only when you press the key button.
On
all vehicles, the key should come out only in LOCK.
Parking Brake and Automatic Transmission
PARK (P) Mechanism Check
When you are doing this check, your vehicle
could begin to move. You or others could be
injured and property could be damaged. Make
sure there
is room in front of your vehicle in case
it begins to roll. Be ready
to apply the regular
brake at once should the vehicle begin to move.
Park on a fairly steep hill, with the vehicle facing
downhill. Keeping your foot on the regular brake, set the
parking brake.
0 To check the parking brake’s holding ability:
With the engine running and transmission
in
NEUTRAL (N), slowly remove foot pressure from
the regular brake pedal.
Do this until the vehicle is
held by the parking brake only.
0 To check the PARK (P) mechanism‘s holding ability:
With the engine running, shift to
PARK (P). Then
release all brakes.
7-43
ProCarManuals.com