ECO mode GMC SIERRA 2008 Get To Know Guide
[x] Cancel search | Manufacturer: GMC, Model Year: 2008, Model line: SIERRA, Model: GMC SIERRA 2008Pages: 24, PDF Size: 0.56 MB
Page 5 of 24

5
Following are examples of symbols you
may find on your vehicle. It is importantto become familiar with them, as theyalert you to various vehicle operatingconditions.
Air Bag Readiness LightAir Conditioning (A/C)
Antilock Brake System Warning
Light
Brake System Warning Light
(Parking Brake Set)
Cruise Control Set LightFour Wheel Drive Light
(Manual Transmission only)
HeadlampsHeated MirrorsMalfunction Indicator Lamp
(Check Engine Light)
Off
On/Off
On
Rear Window DefoggerSafety Belt Reminder LightSecurity Light
StabiliTrak Warning Light
Tire Pressure Warning Light
Tow/Haul Mode Light
Ultrasonic Rear Parking Assist
Voltmeter Operation
The voltmeter shows the condition of the
vehicle’s charging system. The systemis designed to regulate voltage output tohelp improve fuel economy and extendbattery life. Normal system operationreadings may fluctuate (as indicated bythe blue area in the illustration above)based on vehicle operation, includingthe number of electrical accessoriesbeing operated and engine speed.
See Section 3 of your Owner Manual.
Vehicle Symbols
Driver Information Center
Your vehicle’s Driver Information Center
(DIC) provides vehicle information, vehi
cle feature customization (if equipped),
and vehicle warning messages. The DICmessages will be shown on the instru
ment panel cluster display.
Sierra 2008 A 5/16/07 7:49 AM Page 5
Page 9 of 24

9
Memory Settings (if equipped)
The memory buttons are located on the
driver’s door next to the heated seatcontrols. Settings can be programmed
for the driver’s seat, the outside mirrorsand the adjustable pedals (if equipped)for two drivers.
To save memory settings:
1. Adjust the driver’s seat, outside
mirrors and pedals to a comfortable
position.
2. Press and hold button 1 or 2 until two
beeps sound.
3. Repeat these steps for a second
driver using the other memory button.
To recall the settings, press memory
button 1 or 2 with the vehicle in Park. Ifthe Remote Keyless Entry transmitter is
used to enter the vehicle and the memo ry seat recall feature is on (see DriverInformation Center), the settings will be
recalled automatically.
Easy Exit Seat
The easy exit seat button is located
between the two memory buttons. Pressthe exit button, with the vehicle in Park,
to move the driver’s seat to the exitposition.
If the easy exit seat feature is on (see
Driver Information Center), automaticseat movement will occur when the keyis removed from the ignition.
See Section 1 of your Owner Manual.
The accelerator and brake pedals can
be adjusted to a comfortable and safeoperating position by using theadjustable pedals switch located on the
Adjustable Pedals (if equipped)
The automatic climate control system
maintains the desired individual temper
ature for the driver and front seat pas
senger. The system adjusts the airflow
mode, fan speed, air conditioning and
recirculation functions to reach the settemperature(s) as quickly as possible.
Automatic Operation
To set the automatic mode:
1. Press the AUTO button.
2. Set the driver’s and front passenger’s
temperature using the + or – temper ature buttons.
Automatic Climate Controls
(if equipped)
instrument
panel belowthe climatecontrols.
Press the top
arrow on theswitch to movethe pedalsaway from youand the bottom arrow on the switch tomove the pedals toward you.
The pedals cannot be adjusted when the
vehicle is in Reverse or when cruisecontrol is activated.
See Section 2 of your Owner Manual.
Sierra 2008 A 5/16/07 7:49 AM Page 9