low beam GMC SIERRA DENALI 2010 User Guide

GMC SIERRA DENALI 2010 User Guide SIERRA DENALI 2010 GMC GMC https://www.carmanualsonline.info/img/44/57874/w960_57874-0.png GMC SIERRA DENALI 2010 User Guide

Page 427 of 550

GMC SIERRA DENALI 2010 User Guide Headlamp aiming is done with the vehicle's low-beam
headlamps. The high-beam headlamps will be correctly
aimed if the low-beam headlamps are aimed properly.
To adjust the vertical aim:1. Open the

Page 428 of 550

GMC SIERRA DENALI 2010 User Guide 7. Locate the vertical headlamp aiming screws, whichare under the hood near each headlamp assembly.
The adjustment screw can be turned with an
E8 Torx
®socket.
8. Turn the vertical aiming screw until

Page 434 of 550

GMC SIERRA DENALI 2010 User Guide License Plate Lamp
To replace one of these bulbs:1. Reach under the rear bumper for the bulb socket.
2. Turn the bulb socket counterclockwise and pull the bulb socket out of the connector.
3. Pull the

Page 493 of 550

GMC SIERRA DENALI 2010 User Guide FusesUsage
1 Right Trailer Stop/Turn Lamp
2Electronic Suspension Control,
Automatic Level Control Exhaust
3 Left Trailer Stop/Turn Lamp
4 Engine Controls
5 Engine Control Module, Throttle
Control
6 Tr

Page 495 of 550

GMC SIERRA DENALI 2010 User Guide J-Case FusesUsage
57 Cooling Fan 1
58 Not Used
59 Heavy Duty Antilock Brake System
60 Cooling Fan 2
61 Antilock Brake System 1
62 Starter
63 Stud 2 (Trailer Brakes)
64 Left Bussed Electrical Center 1

Page 542 of 550

GMC SIERRA DENALI 2010 User Guide Headlamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-55Aiming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-52
Bulb R

Page 543 of 550

GMC SIERRA DENALI 2010 User Guide L
Labeling, Tire Sidewall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-63
LampsCargo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-14
Dayti
Page:   < prev 1-10 11-20