light GMC YUKON DENALI 2009 User Guide

6. Select the street name with the correct prex from
the list (Dr., Ln., St., etc.). An Information screen
will automatically display.
7. Select the Go screen button. The map screen,
with the destination marked, will display.
8. Select the route preference (Fastest, Shortest, or
Other). The system will calculate and highlight
the route.
9. Select the Start Guidance screen button. You are
now ready to start your route.
See “Getting Started on Your Route” later in this
section for more information.Point of Interest (POI)
The Point of Interest (POI) destination entry method
allows you to select a destination from the POI list.
iPoint of Interest:Touch this screen button to
access the Point of Interest (POI) screen. From this
screen you have two options to select/enter a
destination; enter the name using the alpha keyboard
or select a category from the category list.
2-19

To use the point of interest destination entry method by
entering the name, do the following:
1. Press the DEST hard key.
2. Select the
iPoint of Interest screen button.
3. Enter the POI name.
If ve or less names are available, a list will display.
If more than ve are available, there will be a
screen button with a number in it, it represents the
number of available POIs. Select this button to
view the list.
4. Select the Go screen button next to the POI.
The map screen, with the destination marked,
will display.
5. Select the route preference (Fastest, Shortest, or
Other). The system will calculate and highlight the
route.
6. Select the Start Guidance screen button. You are
now ready to start your route.
See “Getting Started on Your Route” later in this
section for more information.To use the point of interest destination entry method by
selecting a category, do the following:
1. Press the DEST hard key.
2. Select theiPoint of Interest screen button.
3. Select the Browse POI screen button to view the
list of POI categories.
4. Select a category, and then a sub-category.
The system will display available POI names in the
selected sub-category or if the list is too long the
system will display the alpha keyboard.
If the alpha keyboard is displayed, enter the POI
name until a list of available POIs appear. There is
a screen button with a number in it, it represents
the number of available POIs. Select this button to
view the list and select the POI.
5. Select the Go screen button next to the POI.
The map screen, with the destination marked,
will display.
6. Select the route preference (Fastest, Shortest, or
Other). The system will calculate and highlight
the route.
7. Select the Start Guidance screen button. You are
now ready to start your route.
See “Getting Started on Your Route” later in this
section for more information.
2-20

Address Book
The address book entry method allows you to select a
destination by selecting an address that has been
stored in your address book.
*Address Book:Touch this screen button to access
the Address Book screen. From this screen you can
select an address that already exists as the destination.To use the address book entry method, do the following:
1. Press the DEST hard key.
2. Select the
*Address Book screen button.
A list of your address book addresses will display.
3. Select the Go screen button next to the destination.
The map screen, with the destination marked, will
display.
4. Select the route preference (Fastest, Shortest, or
Other). The system will calculate and highlight
the route.
5. Select the Start Guidance screen button. You are
now ready to start your route.
See “Getting Started on Your Route” later in this
section for more information.
See “Adding Destinations to the Address Book”
later in this section.
2-21

Add Waypoint
Add Waypoint:Select this screen button from the
Route screen. This feature allows you to add up to
three waypoints to the current route, between your
start point and nal destination. Once a waypoint has
been added, the points can be edited or deleted.To add a waypoint:
1. Press the DEST hard key.
2. Select the Add Waypoint screen button. This button
will only appear if a route has been calculated.
3. Using the desired method of entering a destination,
enter the waypoint. See “Destination” previously for
more information.
4. Select the route preference (Fastest, Shortest,
or Other). The system will calculate and highlight
the route.
5. Select the Start Guidance screen button. You are
now ready to start your route.
6. To add the second and third waypoints, press the
DEST hard key, then select the Add screen button,
where you would like the next waypoint to fall on
the route.
7. Select the route preference (Fastest, Shortest, or
Other). The system will calculate and highlight the
route.
8. Select the Start Guidance screen button. You are
now ready to start your route.
2-27

To delete a waypoint from your current route:
1. Press the DEST hard key.
2. Select the Delete screen button for the desired
waypoint to delete.
3. The system will display a pop-up conrmation
message. Choose Yes to delete the waypoint;
touch No to cancel this operation.
4. Select the route preference (Fastest, Shortest, or
Other). The system will calculate and highlight the
route.
5. Select the Start Guidance screen button. You are
now ready to start your route.
Suspend Guidance
Press this screen button, from the Route screen, to put
the current route on hold.
Resume Guidance
Press this screen button, from the Route screen,
to resume guidance on the current route.
Cancel Guidance
Press this screen button, from the Route screen,
to cancel the current route.
Adding Destinations to the
Address Book
There are two ways to add a destination to the
address book:
To add the current nal destination to the address
book, press the Mark screen button from the map
screen. The system will automatically save the nal
destination information in the address book.
Press the Add to Address Book screen button
when available on POI information screens,
Destination Entry screens, or POI screens.
The system will automatically save this information
in the address book.
See “Nav” underConfigure Menu on page 2-30for
information on editing address book entries.
2-28

Three types of traffic information for major roadways are
displayed on the navigation system:
Unscheduled traffic incident data, such as accidents
and disabled vehicles
Scheduled traffic incident data, such as road
construction and road closures
Traffic ow information (rate of speed data)
Traffic information is delivered to the vehicle by the XM™
Radio satellites. XM NavTraffic™ makes it possible for
the navigation system to provide continuously updated
traffic information personalized for a driver’s needs.XM NavTraffic™ currently broadcasts the traffic
information for many markets nationally, and the
service may be available in more cities in the future.
Visit xmnavtraffic.com for more details on local
coverage.
A service fee is required in order to receive the
XM NavTraffic™ service.
Turning XM NavTraffic™ On and Off
To turn traffic on or off:
1. Press the Menu hard key, then press the Menu key
repeatedly until Nav is selected or press the
Nav screen button.
2. Touch the Traffic Options button.
3. Touch the Traffic button. This button is highlighted
when it is active.
Selecting Alert for Approaching Traffic Events
enables the system to show a pop-up screen that
noties of possible traffic issues ahead.
When this feature is highlighted, while traveling
on a route, accidents located on the route are
indicated and can be avoided.
2-36

Options
Select the Options screen button. A Traffic Options
menu displays. Select the desired traffic related option.
Traffic:Select to enable or disable the traffic function.
Show Traffic ICONS:Select to display traffic icons
on the map screen. This function allows which traffic
information displays.Traffic Flow Status— This touch screen button is
used to enable or disable the green, yellow, red and
orange arrows shown beside the roads and used
to show the traffic ow or extent of a traffic event.
Black indicates a closed road segment
Red indicates signicantly impaired traffic ow with
average speed less than 25 mph.
Yellow indicates slightly impaired traffic ow with
average speed between 25 and 45 mph.
Green indicates normal traffic ow with average
speed above 45 mph.
2-39

_(Contrast):Touch the + (plus) or−(minus) screen
buttons to increase or decrease the contrast of the
screen.
Auto (Automatic):Touch this screen button for the
system to automatically adjust the screen background
depending on exterior lighting conditions.
At night, the brightness can be adjusted with the vehicle
dimming knob near the headlamp switch.
Night:Touch this screen button and the system will
make the map background darker.
Day:Touch this screen button and the system will
make the map background brighter.Setting the Clock
Press the MENU key to enter the menu options,
then press the MENU key repeatedly until the time is
selected or touch the time screen button, then press
the Set screen button.
Hours:Press the−(minus) or + (plus) signs to
decrease or increase the hours.
Minutes:Press the−(minus) or + (plus) signs to
decrease or increase the minutes.
12/24 Format:Select the 12 screen button for standard
time; select the 24 screen button for military time.
2-45

Finding a Station
If viewing a map screen, touch the source screen
(AM, FM, XM, CD, etc.) button. The display will split
between the audio screen and the map screen.
All station-changing functions can be performed from
this screen.If you do not want to view a split screen or you are
not on a map screen, press the AUDIO hard key.
AM/FM/XM:Touch the source (AM, FM, or XM,
if equipped) screen button or press the AUDIO key
repeatedly until the desired source is highlighted. FM source shown, other sources similar
FM source shown, other sources similar
3-3

Additional Information Displayed
The navigation system may have this feature.
Touch the
4Additional Information Displayed screen
button to turn station, channel, CD, and MP3 information
on or off.
Touch the YES screen button to receive information,
when it is available, for the following; FM: RDS category
name and radio text, XM: Song Title and Artist Name,
CD: CD text, MP3: tag information.
Touch the NO screen button to receive no information.
Limit Features While Driving
The navigation system may have this feature.
Touch the Limit Features While Driving screen button
to turn on and off the ability to limit functions while
driving. When this screen button is highlighted,
the following functions will be limited while driving:
Music Navigator Scrolling
Radio Category Scrolling
Navigation Menu Scrolling and some functions
See “Category” earlier in this section for more
information. See “From Map” underDestination on
page 2-15for more information.
Number of Preset Pages
Touch the/Number of Preset Pages screen button to
change the number of preset pages, 1 through 6.
Each preset page can contain ve preset stations.
Touch the desired numbered screen button.
Remove/Add XM Categories
Touch the&Remove/Add XM Categories screen
button to remove or add XM categories when selecting
XM categories from the category list screen. The list
of XM categories will appear on the screen. Use the up
and down arrow screen buttons to scroll through the
list. The categories to remove will be highlighted and the
categories to add will be dark in color. Touch the
category that you would like to add or remove. Touch
the Restore All Categories screen button to add all
categories that have been removed.
3-8