transmission GMC YUKON DENALI 2010 Owners Manual

GMC YUKON DENALI 2010 Owners Manual YUKON DENALI 2010 GMC GMC https://www.carmanualsonline.info/img/44/57878/w960_57878-0.png GMC YUKON DENALI 2010 Owners Manual

Page 7 of 560

GMC YUKON DENALI 2010  Owners Manual Section 1 In Brief
Instrument Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
Initial Drive Information . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4
Remote

Page 9 of 560

GMC YUKON DENALI 2010  Owners Manual A.Outlet Adjustment on page 4‑23.
B. Turn Signal/Multifunction Lever on page 4‑4.
C. Instrument Panel Cluster on page 4‑26.
D. Shift Lever. See Automatic Transmission Operation
on page 3‑30.
E

Page 21 of 560

GMC YUKON DENALI 2010  Owners Manual SeeDual Automatic Climate Control Systemon
page 4‑18. For vehicles with a rear air conditioning and
heating system, see Rear Air Conditioning and Heating
System and Electronic Climate Controls on pa

Page 45 of 560

GMC YUKON DENALI 2010  Owners Manual 2. Lift the lever(s), located on the bottom rear of thesecond row seat(s) on the inboard side, to release
the seatback. The seatback will fold forward.
3. Lift the same lever again to release the rear

Page 52 of 560

GMC YUKON DENALI 2010  Owners Manual Automatic Seat Release Fold and
Tumble Feature
The transmission must be in (P) for this feature
to work.
{WARNING:
Automatically folding and tumbling the seat when
someone is sitting in the seat, coul

Page 127 of 560

GMC YUKON DENALI 2010  Owners Manual Section 3 Features and Controls
Keys. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3
Remote Keyless Entry (RKE) System . . . . . . . . . . . 3-4
Remo

Page 142 of 560

GMC YUKON DENALI 2010  Owners Manual The power liftgate may be temporarily disabled under
extreme temperatures, or under low battery conditions.
If this occurs, the liftgate can still be operated manually.
If you shift the transmission o

Page 151 of 560

GMC YUKON DENALI 2010  Owners Manual Ignition Positions
The ignition switch has
four different positions.
To shift out of P (Park), the ignition must be in ON/RUN
or ACC/ACCESSORY and the regular brake pedal must
be applied. A (LOCK/OFF)

Page 152 of 560

GMC YUKON DENALI 2010  Owners Manual C (ON/RUN) :This position can be used to operate the
electrical accessories and to display some instrument
panel cluster warning and indicator lights. The switch
stays in this position when the engine

Page 153 of 560

GMC YUKON DENALI 2010  Owners Manual Starting Procedure
1. With your foot off the accelerator pedal, turn theignition to START. When the engine starts,
let go of the key. The idle speed will slow down
as the engine warms. Do not race the
Page:   1-10 11-20 21-30 31-40 41-50 ... 70 next >