instrument panel HONDA ACCORD HYBRID 2023 Service Manual

uuGauges and Displays uDriver Information Interface (Right Side Area)
124
Instrument Panel
■Trip meter
2 Trip meter P. 121
■Elapsed time
Shows the time elapsed since Trip A or Trip B was reset.
■Average speed
Shows the average speed in mph or km/h since Trip A or Trip B was reset.
■Maps
Shows Google Maps screen.
2 Google Maps P. 288
■Compass/Turn-by- Turn Direction
The compass screen and turn-by-turn di rections appear based on the driving
guidance provided by Apple CarPlay or Android Auto.
2 Apple CarPlay P. 273
2 Android AutoTM P. 280
■Navigation
1Elapsed time
You can change when to reset the elapsed time.
2 Customized Features P. 318
1Average speed
You can change when to reset the average speed.
2 Customized Features P. 318
1Navigation
You can select whether to have the turn-by-turn
display come on or not dur ing the route guidance.
2 Customized Features P. 318
Turn-by-turn directions may not be available for all
apps.
Models with Google built-in
All models
23 ACCORD 4D US HEV MAP-3130B6000.book 124 ページ ２０２２年１０月１３日　木曜日　午後４時５０分

Continued125
uuGauges and Displays uDriver Information Interface (Right Side Area)
Instrument Panel
The Driver Attention Monitor an alyzes steering inputs to determine if the vehicle is
being driven in a manner consistent with drowsy or inattentive driving. If it
determines that the vehicle is being driven in such a manner, it will display the
degree of the driver’s attention on the driver information interface.
When you select Driver Attention Monitor on
the driver information in terface, bars on it
light up in white to indicate the degree of the
driver’s attention.
2 Switching the Display P. 119
■Driver Attention Monitor1Driver Attention Monitor
The Driver Attenti on Monitor cannot always detect if
the driver is tired or inattentive.
Regardless of the system’s feedback, if you are
feeling tired, stop in a safe location and rest for as
long as needed.
Driver Information Interface
Right Selector
Wheel
Level
23 ACCORD 4D US HEV MAP-3130B6000.book 125 ページ ２０２２年１０月１３日　木曜日　午後４時５０分

126
uuGauges and Displays uDriver Information Interface (Right Side Area)
Instrument Panel
If two bars light up, the Driver attention
level low message will appear.
If one bar lights up, the Driver attention
level low. Time for a break. message will
appear, a beep will sound, and the steering
wheel will vibrate.
If this message appears, stop in a safe location
and rest for as long as needed.
The message will disa ppear when the right
selector wheel is rolled or when the system
has determined that the driver is driving
normally.
If the driver does not take a break and the
monitor continues to dete ct that the driver is
very tired, the message will appear again after
approximately 15 minutes, accompanied by a
beep and steering wheel vibrations.
The message does not appear when the
traveling time is 30 minutes or less.
23 ACCORD 4D US HEV MAP-3130B6000.book 126 ページ ２０２２年１０月１３日　木曜日　午後４時５０分

Continued127
uuGauges and Displays uDriver Information Interface (Right Side Area)
Instrument Panel
■The Driver Attention Monitor resets when:
• The power system is turned off.
• The driver unfastens the seat belt and ope ns the door while the vehicle is stopped.
■For the Driver Attention Monitor to function:
• The vehicle must be traveling above 25 mph (40 km/h).
• The electric power steering (EPS) system indicator must be off.
■Depending on driving conditions or other factors, the Driver Attention
Monitor may not function in the following circumstances:
• The steering assist function of the Lane Keeping Assist System (LKAS) is active.
2Lane Keeping Assist System (LKAS) P. 445
•The condition of the road is poor; e. g., the surface is unpaved or bumpy.
• It is windy.
• The driver is frequently op erating the vehicle in an assertive manner, such as
changing lanes or accelerating.
■Customizing
You can change the Driver Attention Monitor settings. Select Tactile And Audible
Alert , Tactile Alert , or Off.
2Customized Features P. 318
1For the Driver Attention Monitor to function:
The bars on the driver information interface remain
grayed out unless the Driv er Attention Monitor is
functioning.
23 ACCORD 4D US HEV MAP-3130B6000.book 127 ページ ２０２２年１０月１３日　木曜日　午後４時５０分

128
uuGauges and Displays uDriver Information Interface (Right Side Area)
Instrument Panel
Occurs, under specified conditions, when seat belts are latched or unlatched.
2Seat Belt Reminder P. 48
Shows the remaining oil life and Maintenance MinderTM.
2Maintenance MinderTM P. 513
■Seat Belts
■Maintenance
23 ACCORD 4D US HEV MAP-3130B6000.book 128 ページ ２０２２年１０月１３日　木曜日　午後４時５０分

Continued129
uuGauges and Displays uDriver Information Interface (Right Side Area)
Instrument Panel
Indicates the status of the Road Departure Mitigation system, CMBSTM, Low Speed
Braking Control*, blind spot information system and parking sensor system* such as
On, Off, or Failure, by color and letters.
The following colors indica te the status of any of the above-mentioned systems:
• Green: The system is on.
• Gray: The system is off.
• Amber: There is a problem with the system.
■Safety Support1Safety Support
If a system is indicated by the color amber, have your
vehicle checked by a dealer immediately.
To turn each system on or off, first press the right
selector wheel to switch displays. From the next
display, you can select which system to turn on or off. 2 Road Departure Mitigation System P. 465
2 Blind Spot Information System P. 398
2 Low Speed Braking Control
* P. 418
2 Collision Mitigation Braking SystemTM
(CMBSTM) P. 406
2 Parking Sensor System* P. 495
You can also confirm the st atus of each function by
the color of the safe ty support indicator.
2 Safety Support Indicator (Amber) P. 106
2 Safety Support Indicator (Green/Gray)
P. 109
Even when the Low Speed Braking Control icon is
green, if the Rear Sensor Setting is turned off, the
brake assist will not operate when reversing.
2 Customized Features P. 318
Even when the Parking Sensor System icon is green,
if the Rear Sensor Setting is turned off, the rear
parking sensor will not operate when reversing.
2 Customized Features P. 318
Models with Low Speed Braking Control
* Not available on all models
23 ACCORD 4D US HEV MAP-3130B6000.book 129 ページ ２０２２年１０月１３日　木曜日　午後４時５０分

130
uuGauges and Displays uDriver Information Interface (Right Side Area)
Instrument Panel
Area Info for Road Departure
Mitigation System
Road Departure Mitigation
System Icon and Status Info
Area Info for CMBS
TM
CMBSTM Icon and Status Info
Area Info for Parking
Sensor System
*
Area Info for Blind Spot
Information System
Area Info for Low Speed
Braking Control*
Blind Spot Information System
Icon and Status Info Low Speed Braking Control
Icon and Status Info*
Parking Sensor System
Icon and Status Info*
* Not available on all models
23 ACCORD 4D US HEV MAP-3130B6000.book 130 ページ ２０２２年１０月１３日　木曜日　午後４時５０分

Continued131
uuGauges and Displays uDriver Information Interface (Right Side Area)
Instrument Panel
Display the adjustment for instrument panel brightness.
When the power mode is in ON, you can use the right selector wheel to adjust
instrument panel brightness.
Brighten: Roll the right selector wheel up.
Dim: Roll the right selector wheel down.
Press the right selector wheel to exit.
You can turn the VSA ® on or off.
Roll the right selector wheel to scroll to select
Reduce traction control , then press the right
selector wheel to check or uncheck it.
2 Vehicle Stability AssistTM (VSA ®), aka
Electronic Stability Control (ESC), System
P. 390
■Brightness Setting
■Vehicle Stability Assist Mode
1 Brightness Setting
The brightness of the gauge is automatically adjusted
depending on the ambient brightness.
•The brightness dims when the ambient light is
dark.
•The brightness brightens when the ambient light is
bright.
You can change the setting even when the ambient
lighting is bright, but the brightness of the gauge
won’t change.
23 ACCORD 4D US HEV MAP-3130B6000.book 131 ページ ２０２２年１０月１３日　木曜日　午後４時５０分

132
uuGauges and Displays uDriver Information Interface (Right Side Area)
Instrument Panel
■Speed/distance units
Enables you to set the displayed measuremen ts to read in either miles and mph or
km and km/h. 1.Press the right selector wheel when you
select the Gauge display settings on the
driver information interface.
2. Roll the right selector wheel to scroll to
select Speed/distance units , then press
the right selector wheel.
3. Roll the right selector wheel to scroll to
select your desired settings, then press the
right selector wheel.
■Gauge Display Settings
23 ACCORD 4D US HEV MAP-3130B6000.book 132 ページ ２０２２年１０月１３日　木曜日　午後４時５０分

Continued133
uuGauges and Displays uDriver Information Interface (Right Side Area)
Instrument Panel
■Arrange content on the right side area
You can choose which contents to display on the right side area. 1.Press the right selector wheel when you
select the Gauge display settings on the
driver information interface.
2. Roll the right selector wheel to scroll to
select Hide/show , then press the right
selector wheel.
3. Roll the right selector wheel to scroll
between contents, then press the right
selector wheel to check or uncheck them.1Arrange content on the right side area
Contents that are gray ca nnot be removed from the
right side area.
When you customize settings, shift to
( P.
23 ACCORD 4D US HEV MAP-3130B6000.book 133 ページ ２０２２年１０月１３日　木曜日　午後４時５０分