navigation update HONDA CIVIC COUPE 2014 9.G Navigation Manual
[x] Cancel search | Manufacturer: HONDA, Model Year: 2014, Model line: CIVIC COUPE, Model: HONDA CIVIC COUPE 2014 9.GPages: 441
Page 87 of 441

uuGauges and Multi-Information Display uintelligent Mult i-Information Display (i-MID)
86
Instrument Panel
Shows the outside temperature in Fahr enheit (U.S.) or Celsius (Canada).
■Adjusting the outside temperature display
Adjust the temperature reading up to ±5°F  or ±3°C if the temperature reading 
seems incorrect.
Use the i-MID's customized featur es to correct the temperature.
2Customized Features  P. 87
Shows the instant fuel economy as  a bar graph in mpg or l/100 km.
Engine horsepower usage while driving is 
displayed in the power monitor.
100%  indicates that horsepower is at its 
maximum.
Shows you turn-by-turn driving directions to your destination linked with the 
navigation system.
2 Refer to the Navigation System Manual
■Outside Temperature
■Instant Fuel Economy*
■Power Monitor*
1Outside Temperature
The temperature sensor is in the front bumper.
Road heat and exhaust from another vehicle can 
affect the temperature reading when your vehicle 
speed is less than 19 mph (30 km/h).
It may take several minutes for the display to be 
updated after the temperature reading has stabilized.
1Power Monitor*
Engine horsepower is affected by external conditions 
such as driving conditions, or vehicle condition. The 
power monitor can compensate for some of these 
variables, but different re adings may be displayed.
■Turn-by-Turn Directions*1Turn-by-Turn Directions*
You can select whether th e turn-by-turn display 
comes on during the route guidance. 2 Customized Features  P. 87
* Not available on all models
14 CIVIC 2D_SI-31TS86210.book  86 ページ  2014年1月29日 水曜日 午後8時9分 
Page 101 of 441

100
Controls
Clock
Adjusting the Clock
You can adjust the time in the clock display, using the CLOCK  knob with the ignition 
switch in ON 
(w*1.
■Using the CLOCK knob
1. Press the CLOCK  knob to access the clock 
adjustment mode screen.
2. Turn the  CLOCK knob to adjust the hours.
3. Press the CLOCK  knob. The display 
switches to minute adjustment.
4. Turn the  CLOCK knob to adjust the 
minutes.
5. Press the CLOCK  knob to complete clock 
adjustment.
*1: Models with the smart entry system have an  ENGINE START/STOP button instead of an 
ignition switch.
■Adjusting the Time
1 Adjusting the Clock
The clock is automatica lly updated through the 
navigation system, so the ti me does not need to be 
adjusted.
You can customize the clock display to show the 12 
hour clock or 24 hour clock. 2 Customized Features  P. 87
Models with navigation system
Models without display audio
Models without navigation system
CLOCK Knob
Models without display audio
On i-MID
14 CIVIC 2D_SI-31TS86210.book  100 ページ  2014年1月29日 水曜日 午後8時9分