Battery HONDA CR-Z 2011 1.G User Guide

88
Instrument Panel
Gauges and Multi-Information Display Multi-Information Display
Power Flow Monitor
■
Displays engine and electric motor power flow – whether the system is assisting the engine or charging the battery.
Power Flow Monitor
The displayed power low may not correspond to the ASST/CHRG indicators directly.
Electric Motor Assist Indicator (ASST) P. 8 2 Battery Charge in Progress (CHRG) P. 8 2
Operating
Not operating
Engine Operation IconPower Flow
Power is supplied with the engine and the electric motor is assisting the engine.
The electric motor is charging the IMA
battery.
Power is supplied with only the engine.
Power is supplied with only the engine and the electric motor is charging the
IMA battery.
Main MenuTable of Contents

99
Controls
Locking and Unlocking the Doors
Key Types and Functions
This vehicle comes with the following keys:Keys

■
Use the key to start and stop the engine, and to lock and unlock all the doors and hatch. You can also use the remote transmitter to lock and unlock the doors and hatch.
Key Number Tag

■
Contains a number that you will need if you purchase a replacement key.
Key Types and Functions
All of the keys have an immobilizer system. The immobilizer system helps to protect against vehicle theft.
Immobilizer System P.1 0 5
The keys contain precision electronics. Adhere to the following advice to prevent damage to the electronics: Do not leave the keys in direct sunlight, or

•
in locations with high temperature or high humidity.Do not drop the keys or set heavy objects on

•
them.Keep the keys away from liquids.

•
Do not take the keys apart except for replacing

•
the battery.
If the circuit in the keys are damaged, the engine may not start, and the remote transmitter may not work.If the keys do not work properly, have them inspected by a dealer.
Key Number Tag
Keep the key number tag separate from the key in a safe place outside of your vehicle.If you wish to purchase an additional key, contact your dealer. If you lose your key and you cannot start the engine, contact your dealer.
Key with Remote Transmitter
Main MenuTable of Contents

100
Controls
Locking and Unlocking the Doors Locking/Unlocking the Doors from Outside
Locking/Unlocking the Doors from the Outside
Using the Remote Transmitter
■
■ Locking the Vehicle
Press the LOCK button. Once:
Some exterior lights will flash, all the
doors and hatch will lock, and the security system sets.
Twice (within five seconds after the first push):
A beeper sounds and verifies the security system is set.
Unlocking the Vehicle
■
Press the UNLOCK button. Once:
Some exterior lights will flash twice, and
the driver’s door unlocks.
Twice:
The passenger’s door and the hatch unlock.
Panic Mode
■
If you press the panic button for approximately one second, the following will occur:
The horn sounds.
•
Some exterior lights flash for about 30 seconds.
•
Canceling Panic Mode
■
Press any button on the remote transmitter, or turn the ignition switch to ON
II.
Using the Remote Transmitter
Open the door or the hatch within 30 seconds. If you do not open a door or the hatch within 30 seconds of unlocking the vehicle with the remote transmitter, the doors and the hatch will automatically relock. If the light control switch is in the door activated position, the interior lights come on when you press the UNLOCK button.No doors opened: The lights fade out after 30 seconds.Doors relocked with the remote: The lights go off immediately.
Interior Lights P.12 3
The remote transmitter uses low-power signals, so the operating range may vary depending on the surroundings. The remote transmitter will not work when the key is in the ignition switch. The remote will not lock the vehicle when a door or the hatch is open. If the distance at which it works varies, the battery is probably low.If the LED does not come on when you press a button, the battery is dead.
Replacing the Battery P. 2 7 9
Lock Button
Panic Button
Unlock Button LED
Main MenuTable of Contents

106
Controls
Security System Security Alarm System
Setting the Security Alarm System
■
The security alarm system automatically sets when the following conditions have been met:
The ignition switch is in LOCK
•
0, and the key has been removed from the
ignition switch. The hood is closed.
•
Both doors and the hatch are locked.
•
When the Security Alarm System Sets
■
The security system indicator in the instrument panel blinks. When the blinking interval changes after about 15 seconds, the security alarm system is set.
To Cancel the Security Alarm System
■
The security alarm system is canceled when the vehicle is unlocked using the key or remote transmitter. The security system indicator goes off at the same time.
Security Alarm System
Do not set the security alarm system when someone is in the vehicle or a window is open. The system can accidentally activate when unlocking the door with the lock tab or the master door lock switch. If the 12 volt battery goes dead after you have set the security alarm system, the security alarm may go off once the battery is recharged or replaced.If this occurs, deactivate the security alarm system by unlocking a door using the key or remote transmitter. Do not attempt to alter this system or add another device to it.
Main MenuTable of Contents

110
Controls
Operating the Switches Around the Steering Wheel Turn Signals Light Switches
Turn Signals
The turn signals can be used when the ignition switch is in ON
II.
Light Switches Manual Operation

■
Rotating the light switch turns the lights on and off, regardless of the position of the ignition switch.
Low Beams
■
Rotate the light switch to
.
High Beams
■
Push the lever forward until you hear a click. Pull the lever back to return to low beams.
Flashing the High Beams
■
Pull the lever back and release it.
Right Turn
Left Turn
Light Switches
If you remove the key with the lights on, a lights on
reminder chime will sound. When the lights are on, the lights on indicator in the instrument panel will be on.
Indicators P. 6 8
Repeatedly turning the headlights on and off reduces the life of the HID headlight bulbs.If you sense that the level of the headlights is abnormal, have the vehicle inspected by a dealer. Do not leave the lights on when the engine is off because it will cause the battery to discharge.
H igh Beam s
Lo w B eam s
Flashing

the high beam s
Turns on parking, side marke r,
tail, and license plate lights Tu rns on headlights, parking,
side marker, tail, and license plate lights
Main MenuTable of Contents

116
Controls
Operating the Switches Around the Steering Wheel Rear Defogger/Heated Door Mirror Button
Rear Defogger/Heated Door Mirror* Button
Rear Defogger/Heated Door Mirror Button
NOTICE When cleaning the inside of the rear window, be careful not to damage the heating wires.It is critical to wipe the window from side to side along the defogger heating wires. This system consumes a lot of power, so turn it off when the window has been defogged.Also, do not use the system for a long period when the engine is idling. This may weaken the 12 volt battery, making it dificult to start the engine.
Press the rear defogger and heated door mirror button to defog the rear window and mirrors when the ignition switch is in ON II.
The rear defogger and heated door mirrors automatically switch off after 10–30 minutes depending on the outside temperature. However, if the outside temperature is 32°F (0°C) or below, they do not automatically switch off.
* Not available on all models
Main MenuTable of Contents

127
Controls
Interior Lights/Interior Convenience Items Interior Convenience Items
Accessory Power Socket
■
There is an accessory power socket in the front console panel. It can be used when the ignition switch is in ACCESSORY
I or ON II.
Open the cover to use it.
Accessory Power Socket
The accessory power socket is designed to supply power for 12 volt DC accessories that are rated 120 watts or less (10 amps).
NOTICE Do not insert an automotive type cigarette lighter element.This can overheat the power socket. To prevent 12 volt battery drain, only use the power socket with the engine running.
Main MenuTable of Contents

140
Features
Audio System Audio System Theft Protection
Audio System Theft Protection
The audio system is disabled when it is disconnected from the power source, such as when the 12 volt battery is disconnected or goes dead.Entering the Audio Security Code
■
“ENTER CODE” appears on the display when the power is reconnected.
Turn on the audio system.
1.
Enter the security code using the preset buttons.
2.
Models with navigation system
Touch the icon to enter the code, then touch the Done icon to set it. If you enter an incorrect digit, continue to the last digit, then try again. If you do not enter the code correctly after 10 tries, you need to visit a dealer to have the system reset.
Audio System Theft Protection
Find the audio system's security code and serial number on the radio code card.
Do not store the card in your vehicle. If you lose the
radio code card, you must obtain the information from a dealer.
Main MenuTable of Contents

174
Features
Bluetooth ®
HandsFreeLink ®
Using HFL
Help Features
■
To hear general HFL information and help, say “Tutorial.”

•
Say “Hands-free help” or “Help” any time to get help or hear a list of

•
commands. Multi-Information Display

■
The multi-information display notifies you when there is an incoming call.
Bluetooth ®
HandsFreeLink ®
(HFL)
Bluetooth ®
Wireless Technology
Bluetooth ®
name and logos are registered
trademarks owned by Bluetooth SIG, Inc., and any
use of such marks by Honda Motors Co., Ltd., is under license. Other trademarks and trade names are those of their respective owners.
Multi-Information Display
The information that appears on the multi- information display varies between phone models.Battery Level Status
Roam Status Phone Dialing
Signal Strength
HFL Mode
Main MenuTable of Contents

177
Features
Bluetooth ®
HandsFreeLink ®
HFL Menus
Phone Setup
■
To Pair a Cell Phone
■
If no phone has been paired to the system before, HFL gives you information
1.
about how to pair the first phone. If a phone has already been paired: say “Phone Setup” and “Pair” after the HFL prompts. Follow the HFL prompts and put your phone in discovery or search mode.
2.
HFL gives you a four-digit code and begins searching for your phone.
When your phone finds a
3. Bluetooth®
device, select HFL from the options and
enter the four-digit code. Follow the HFL prompts and name the newly paired phone.
4.
To Rename a Paired Phone
■
Say “Phone Setup.”
1.
Say “Edit” after the prompts.
2.
Follow the HFL prompts and rename the phone.
3.
If there is more than one phone paired to the system, HFL asks you which
phone’s name you want to change.
To Delete a Paired Phone
■
Say “Phone Setup.”
1.
Say “Delete” after the prompts.
2.
Follow the HFL prompts.
3.
HFL asks you which phone you want to delete.
Phone Setup
Press the
button and wait for a beep before
giving a command. Your Bluetooth -compatible phone must be paired
to HFL before you can make and receive hands-free calls. Phone Pairing Tips: You cannot pair your phone while the vehicle is

•
moving. Your phone must be in the discovery or search

•
mode when pairing the phone. Refer to your phone's manual.Up to six phones can be paired.

•
Your phone's battery may drain faster when it is

•
paired to HFL.If your phone is not ready for pairing or not

•
found by the system within three minutes, the system times out and returns to idle.
continued
Main MenuTable of Contents