display HONDA CR-Z 2012 1.G Service Manual

145
uuAudio without Navigation SystemuPlaying a CD
Continued
Features
Playing a CD
Your audio system supports audio CDs, CD-Rs and CD-RWs in either MP3 or WMA
format. With the CD loaded, press the CD button.
SCAN Button
You will get a 10-second sampling of each song. ●Press to sample all tracks on the CD (all files in
the current folder in MP3 or WMA).
● Press two times to sample the first file in each
of the main folders (MP3 or WMA).
● To turn off scan, press and hold the button.
(CD Eject) Button
Press to eject a CD.
/ Button
Press to skip to the next folder, and to skip to
the beginning of the previous folder in MP3 or WMA.
(Power) Button
Press to turn the audio
system ON and OFF.
CD Slot
Insert a CD abou t halfway into the CD slot.
/ SEEK Buttons
Press or to change tracks
(files in MP3 or WMA).
Selector Knob
Turn to adjust the volume.
Press and turn to select an item, then press to set your selection.
TITLE Button
Press to display the text data on a CD (if it was recorded with text data).CD Button
Press to play a CD.
RDM (Random) Button
● Press to play all tracks/files on a CD
in random order.
● Press two times to play all files in
the current folder (MP3 or WMA) in
random order.
● To turn off random, press and hold the button.
RPT (Repeat) Button ● Press to replay a track/file continuously.
● Press two times to replay all files in the current folder.
● To turn off repeat, press and hold the button.

uuAudio without Navigation SystemuPlaying a CD
146
Features
1. Press to switch the display to a folder list.
2. Rotate to select a folder.
uPress button to play the first file on the selected folder.
3. Press to change the display to a list of files in that folder.
4. Rotate to select a file, then press .
■How to Select a File from a Folder with the Selector Knob (MP3/WMA)1Playing a CD
NOTICE
Do not use CDs with adhesive labels. The label can cause the CD to jam in the unit.
WMA files protected by digital rights management
(DRM) cannot be played.
The audio system displays “UNSUPPORTED,” then
skips to the next file.
Text data appears on the display under the following circumstances: •When you select a new folder, file, or track.
• When you change the audio mode to CD.
• When you insert a CD.
The display shows up to 31 characters of text data.
Press and hold the TITLE button to see additional
characters. indicates that the text data continues.
The display goes back to the previous screen if you
press and hold the button again.
If you eject the CD but do not remove it from the slot,
the system reloads the CD automatically after several
seconds.

147
uuAudio without Navigation SystemuPlaying an iPod®
Continued
Features
Playing an iPod ®
Connect the iPod ® using your dock connector to the USB adapter cable, then press
the AUX button. 2 USB Adapter Cable P. 137
AUX Button
Press to select iPod® (if connected).
Button
Press to go back to the previous display.
(Power) Button
Press to turn the audio system
ON and OFF.
Selector Knob
Turn to adjust the volume. Press
and turn to select an item, then
press to set your selection. USB Indicator
Comes on when an iPod
® is connected.
/ SEEK Buttons
Press or to change songs.
Button
Press to set your selection.
TITLE Button Press to display the text data.
RDM (Random) Button ● Press to play all available files in a
selected list (playlists, artists,
albums or songs) in random order.
● Press two times to play all available
albums in a selected list (playlists,
artists, albums or songs) in random
order.
● To turn off shuffle mode, press and
hold the button.
RPT (Repeat) Button ●
Press to replay a file continuously.
● To turn off repeat, press the button
again.

uuAudio without Navigation SystemuPlaying an iPod®
148
Features
1. Press to display the iPod ® menu.
2. Rotate to select a menu.
3. Press to display the items on that menu.
4. Rotate to select an item, then press .
■How to Select a File from the iPod ® Menu1Playing an iPod ®
Available operating functions vary on models or
versions. Some functions may not be available on the
vehicle's audio system.
If there is a problem, you may see an error message
on the display. 2 iPod ®/USB Flash Drive P. 168

149
uuAudio without Navigation SystemuPlaying a USB Flash Drive
Continued
Features
Playing a USB Flash Drive
Your audio system reads and plays sound files on a USB flash drive in either MP3,
WMA or AAC*1
format.
Connect your USB flash drive to the USB adapter cable, then press the AUX button. 2 USB Adapter Cable P. 137
*1:Only AAC format files recorded with iTunes ® are playable on this unit.
AUX Button
Press to select USB flash drive (if connected).
SCAN Button You will get a 10-second sampling of each file.
● Press to sample all files in the current folder.
● Press two times to sample the first file in each of
the main folders.
● To turn off scan, press and hold the button.
(Power) Button
Press to turn the audio system
ON and OFF.
Selector Knob Turn to adjust the volume. Press and turn to select an item, then
press to set your selection. USB Indicator
Comes on when a USB flash
drive is connected.
/ Button
Press to skip to the next folder, and
to skip to the b eginning of the
previous folder.
/ SEEK Buttons
Press or to change files.
TITLE Button
Press to display the text data.
RDM (Random) Button ● Press to play all files in random order.
● Press two times to play all files in the
current folder in random order.
● To turn off random, press and hold
the button.
RPT (Repeat) Button ● Press to replay a file continuously.
● Press two times to replay all files in the current folder.
● To turn off repeat, press and hold the button.

uuAudio without Navigation SystemuPlaying a USB Flash Drive
150
Features
1. Press to switch the display to a folder list.
2. Rotate to select a folder.
uPress button to play the first file on the selected folder.
3. Press to change the display to a list of files in that folder.
4. Rotate to select a file, then press .
■How to Select a File from a Folder with the Selector Knob1Playing a USB Flash Drive
Use the recommended USB flash drives.
2 USB Flash Drives P. 171
Files in WMA format protected by digital rights
management (DRM) are not played.
The audio system displays “UNPLAYABLE FILE,” and
then skips to the next file.
If there is a problem, you may see an error message
on the display. 2 iPod ®/USB Flash Drive P. 168

151
Continued
Features
Audio with Navigation System *
Audio System Basic Operation
To use the audio system function, the ignition switch must be in ACCESSORY
(q
or
ON
(w .
To operate the audio system, press the control buttons on the side of the screen or
touch the control icons on the audio screen. Press the AUDIO button to show the audio screen.
To select any function, touch the appropriate icon on the screen.
■ How to access the disc slot or PC card slot
Press the OPEN button.
The screen folds back, and the CD and PC
card slots appears.
1Audio System Basic Operation
Voice Control System
The audio system is voice operable. See the navigation system manual for details.
■Operation with the Control Icons1Operation with the Control Icons
On the navigation screen, touch the AUDIO INFO icon
to see the selected audio information.
Press any of the audio buttons to display the audio
status bar at the bottom of the screen.
AUDIO INFO Icon
AUDIO Button
* Not available on all models

uuAudio with Navigation System*uAudio System Basic Operation
152
Features
Push the CLOSE button to return the screen to
the upright position.
■ Adjusting the sound
Press the AUDIO button, then touch the
Sound icon.
Adjustable Settings:
To adjust each setting, touch any setting icon such as FR or RR on the fader setting.1Operation with the Control Icons
If you eject the CD but do not remove it from the slot,
the system reloads the CD automatically after several
seconds.
Do not use the folded down screen as a tray. (CD Eject) Button
Press to eject a CD.PC Card Slot
CD Slot
CLOSE
Button
(PC Card Eject) Button
Press to eject a PC card.
1Adjusting the sound
When the adjustment level reaches the center, you
will see "C" in the display.
The SVC has four modes: OFF, LOW, MID, and HIGH.
SVC adjusts the volume level based on the vehicle
speed. As you go faster, audio volume increases. As
you slow down, audio volume decreases.
The system automatically re turns to the selected
audio mode several seconds after you stop adjusting
a setting.
Sound Mode Sound Icon
Speaker Setting
Bass/Treble Setting
Speed-sensitive
Volume Compensation

153
uuAudio with Navigation System*uAudio System Basic Operation
Features
There are three backgrounds to choose
from when displaying sound levels:
Level: The sound level is shown with the vertical bars.
Spectrum Analysis: The sound level appears as ripples of water.
Off
Each time you touch the Background icon, the screen changes.
Use the joystick to select an icon on the screen
and access some audio functions.
Push left, right, up, or down to select an item.
Press to set your selection.
■Selecting the Background
■Operation with the Joystick
Joystick

154
uuAudio with Navigation System*uPlaying the AM/FM Radio
Features
Playing the AM/FM Radio
SCAN Button
Press to sample each of the
strongest stations on the
selected band for 10 seconds.
To turn off scan, press the button
again.
VOL/PWR (Volume/Power) Knob
Press to turn the audio system
ON and OFF.
Turn to adjust the volume.
Preset Buttons (1-6)
To store the station:
1. Tune to the selected station.
2. Pick a preset button and hold it until you hear a beep.
To listen to a stored station, select a
band, then press the preset button.
AM/FM Button
Press to select a band.
AUTO SEL (Auto Select) Button
Touch to scan both bands and store the strongest station in each preset.
To turn off auto select, touch it again.
This restores the presets you originally set.
TUNE Bar ● Press either side to select a station.
● Press and hold to search up and down
the selected band for a station with a
strong signal.
AUDIO Button
Press to display the audio mode on the navigation screen. FM1/FM2/AM Icon
Touch to select a band.
Navigation Display
Joystick