display HONDA ODYSSEY 2010 RB3-RB4 / 4.G Service Manual

ÃŽÃŽÃŽ
ÃŽ ÃŽ
ÃŽ ÃŽ
ÃŽ
µ™¶ ™
µ™¶ ™
ÃŽ Menu Item
LANGUAGE
SELECTION
ADJUST OUTSIDE
TEMP. DISPLAY
TRIP A RESET WITH
REFUEL
ELAPSED TIME
RESET
MEMORY POSIT ION
LINK
INTERIOR LIGHT
DIMMING T IME
HEADLIGHT AUT O
OFF TIMER Description
Changes the language used in the display.
Changes the outside temperature reading above or
below its current reading.
Causes trip meter A and the average fuel economy to
reset when you refuel.
Resets the elapsed time of your current trip.
Changes the driver’s seat to a stored setting.
Changes how long (in seconds) the interior lights stay
on after you close the doors.
Changes how long (in seconds) the exterior lights
stay on after you close the driver’s door. Page
108
110
112
114
116
118
120
Group Setup
MET ER SET UP
(P. 107)
POSITION SETUP
(P. 116)
LIGHTING
SETUP
(P. 118) Setting Option
ENGLISH
FRENCH
SPANISH 5°F 0°F 5°F (U.S.)
3°C 0°C 3°C
(Canada)
ON
OFF
IGN RESET
TRIP A RESET
TRIP B RESET
ON
OFF
15 sec
30 sec
60 sec
0sec
15 sec
30 sec
60 sec
Default setting
:
Multi-Inf ormation Display
102
——
y

y
(y
y
2010 Odyssey

ÃŽ
ÃŽ
ÃŽ ÃŽ ÃŽ
ÃŽ Menu Item
AUTO DOOR LOCK
AUTO DOOR UNLOCK
KEYLESS LOCK
SECURITY RELOCK
TIMER
FRONT WIPER
ACTION Setting Option
SHIFT FROM P
WIT H VEHICLE SPEED
OFF
DRIVER’S DOOR WITH
SHIFT TO P
ALL DOORS WITH SHIFT
TO P
DRIVER’S DOOR WITH
IGN OFF
ALL DOORS WITH IGN
OFF
OFF
ON
OFF
30 sec
60 sec
90 sec
WITH VEH SPD
INTERMITTENT
OK
CANCEL Page
123
125
127
129
131
104
Group Setup
DOOR · WINDOW
SETUP
(P. 122)
WIPER SETUP
(P. 131)
DEFAULT ALL Description
Changes when the doors automatically lock.
Changes when the doors automatically unlock.
The exterior lights flash each time you press the
LOCK or UNLOCK button. A beeper will also sound
when you press the LOCK button twice.
Changes how long it takes (in seconds) for the doors
to relock and the security system to set af ter you
unlock and do not open the door.
Changes the wiper operation between two settings
when the wiper switch is in the INT position.
Changes all the customized settings as they were
when the vehicle left the factory.
Default setting
:
ACKNOWLEDGEMENT
Multi-Inf ormation Display
Inst rument s and Cont rols
103
——
y

y
(y
y
2010 Odyssey

To enter the customizing mode,
press and hold the INFO button for
more than 3 seconds. Then select
‘‘DEFAULT ALL’’ by pressing the
INFO button.To set the def ault settings, select
‘‘OK’’ by pressing the INFO button,
then press the SEL/RESET button.
When ‘‘DEFAULT ALL’’ is
completed successf ully, you will see
the above display f or several seconds,
and the display will return to
‘‘CUSTOMIZE ENTRY.’’
Press the SEL/RESET button to
enter ‘‘DEFAULT ALL.’’ DEFAUL T AL L
Multi-Inf ormation Display
104
——
y


y
(y
y
2010 Odyssey

If ‘‘DEFAULT ALL’’ is not completed
successf ully, you will see the above
display f or several seconds, then the
display goes back to the normal
message mode. Repeat the
procedure to select ‘‘DEFAULT ALL.’’If you want to cancel ‘‘DEFAULT
ALL,’’ select ‘‘CANCEL,’’ then press
the SEL/RESET button. The display
goes back to ‘‘CUSTOMIZE ENTRY.’’
Multi-Inf ormation Display
Inst rument s and Cont rols
105
——
y

y
(y

y
2010 Odyssey

You can customize some of the
vehicle control settings to your
pref erence. Here are the settings
you can customize:
While the multi-information display
is showing ‘‘CHANGE SETTING,’’
press the SEL/RESET button. The
display will change to the initial
display of CUSTOMIZE GROUP.
Then, each time you press the INFO
button, the display changes as shown
in the next column.
Press the INFO button until you see
the setup you want to customize, and
press the SEL/RESET button to
enter your selection.DOOR · WINDOW SETUP (see
page ) METER SETUP (see page )
POSITION SETUP (see page
)
LIGHTING SETUP (see page )
WIPER SETUP (see page ) 107
116
118 122 131
Change Setting
Multi-Inf ormation Display
106
Press the SEL/RESET button
Press the INFO button
——
y

y
(y


y
2010 Odyssey

There are f our custom settings items
in the Meter Setup:LANGUAGE SELECTION (see
page )
ADJUST OUTSIDE TEMP.
DISPLAY (see page )
TRIP A RESET WITH REFUEL
(see page )
ELAPSED TIME RESET (see
page )
While ‘‘METER SETUP’’ is displayed,
press the SEL/RESET button on the
steering wheel. Then, press the
INFO button repeatedly. Each time
you press the INFO button, the
display changes as shown.
To customize a setting, press the
INFO button repeatedly until you see
the setting, and press the SEL/
RESET button. Then, f ollow the
procedures described on the
f ollowing pages. 108
112
114
CONT INUED
Meter Setup
Multi-Inf ormation Display
Inst rument s and Cont rols
107
Press the INFO button
——
y

y
(y

y
110
2010 Odyssey

While the multi-information display
is showing ‘‘METER SETUP,’’ press
the SEL/RESET button on the
steering wheel. The display changes
to ‘‘LANGUAGE SELECTION.’’
Press the SEL/RESET button again
to enter the language selection mode.There are three selectable languages,
English, French, and Spanish. Each
time you press the INFO button, the
display changes as shown.
Select the language you want by
pressing the INFO button, and press
the SEL/RESET button to enter
your selection.
L anguage Select ion
Multi-Inf ormation Display
108
——
y



y
(y

y
2010 Odyssey

When language selection is
successf ully completed, the display
changes to the screen shown above
f or several seconds, then goes back
to ‘‘CUSTOMIZE MENU.’’If you f ail to select a language
properly, you will see the above
display f or several seconds, then the
display goes back to ‘‘CUSTOMIZE
MENU.’’ Repeat the setup.To exit ‘‘LANGUAGE SELECTION,’’
press the INFO button repeatedly
until you see ‘‘EXIT,’’ then press the
SEL/RESET button. The display
goes back to ‘‘CUSTOMIZE MENU.’’
All messages on the multi-
inf ormation display will be shown in
the language you selected.
CONT INUED
Multi-Inf ormation Display
Inst rument s and Cont rols
109
——
y


y
(y

y
2010 Odyssey

Press the SEL/RESET button. The
display changes as shown above.
The highlighted number is the
current adjustment above or below
the outside temperature. Press the
INFO button repeatedly until the
appropriate number appears, then
press the SEL/RESET button to
enter your selection.
If you f ind that the temperature
reading is always a f ew degrees
below or above the actual
temperature, adjust it as described in
the f ollowing section.
While the multi-information display
shows ‘‘METER SETUP,’’ press the
SEL/RESET button on the steering
wheel. The display changes to the
‘‘CUSTOMIZE MENU.’’ Press the
INFO button once, and you will see
‘‘ADJ. OUTSIDE TEMP. DISPLAY’’
as shown above.
Multi-Inf ormation Display
A djust Outside T emp. Display
110
——
y

y
(y

y
2010 Odyssey

If you f ail to enter the desired
adjustment properly, you will see the
above display for several seconds,
then the display goes back to
‘‘CUSTOMIZE MENU.’’ Repeat the
adjustment.
When your selection is successf ully
entered, you will see the above
display f or several seconds, and then
the display changes back to
‘‘CUSTOMIZE MENU.’’
To exit ‘‘ADJ. OUTSIDE TEMP.
DISPLAY,’’ press the INFO button
until you see ‘‘EXIT,’’ and press the
SEL/RESET button. The display
goes back to ‘‘CUSTOMIZE MENU.’’
CONT INUED
Multi-Inf ormation Display
Inst rument s and Cont rols
111
——
y

y
(y

y
2010 Odyssey