reset HONDA ODYSSEY 2010 RB3-RB4 / 4.G Technology Reference Guide

Information Display/
MID/Auto Door Lock
Information Display (LX, EX, and EX-L)Consists of several displays that provide you with useful information.
Once you start the engine, the display shows your
last active selection from the previous drive cycle.
To toggle between the different displays, press
the select/reset knob repeatedly. Information Displays
Accessing the Information Display
* if equipped
Oil life
Outside temperature*, Trip B
Outside temperature*, Trip A
Odometer, Trip A
10 Odyssey TRG_Front Inside:Inside Cvr 4/29/2009 11:46 AM Page 1 2010 Odyssey

Multi-Information Display (MID) (Touring)
Upper
displayLower
display
SEL/
RESET
button
Info
button
Once you start the engine, the MID shows the last
active lower display.
Pressthe Info button to see the
last active selection on the upper display.
To toggle between the different displays, pressthe
Info button for the upper display and pressthe
SEL/RESET button for the lower display.
Oil life
Outside temperature, Trip B
Outside temperature, Trip A
Odometer, Trip A
MID Lower Displays
Accessing the MID
10 Odyssey TRG_1ab:ExtraPages.qxd 9/24/2009 11:50 AM Page a1 2010 Odyssey

MID Upper Displays
Basic trip computer displays are shown here.
Instant fuel
economy
Range with
remaining fuel
Total travel
time
Tire Pressure
Monitor
Average fuel
Average speed
Auto Door Locking/Unlocking
Default Lock SettingThe doors
are preset to
lock when
your vehicle
reaches
about 9 mph. Default Unlock Setting
Only the
driver’s door
is preset to
unlock when
you shift into
Park (P).
10 Odyssey TRG_1ab:ExtraPages.qxd 9/24/2009 11:51 AM Page b1 2010 Odyssey

Information Display/
MID/Auto Door Lock
Modifying the Auto Door Unlock Setting
Follow these steps to program all doors to unlock when you shift to Park:
Touring
AUTO
DOOR UNLOCK
1. Select “CHANGE SETTING.”
2. Select “DOOR-WINDOW SETUP.”
3. Select “AUTO DOOR UNLOCK.”
4 . Select “ALL DOORS WITH SHIFT
TO P.” Once set, the MID will show
the previous menu.
5 . To exit and save the setting, select
“EXIT.”
SEL/
RESET
button
Info
button
1.
Close the driver’s
door. Shiftinto Park.
See Auto Door Locking/Unlocking in your owner’s manual for other programmable settings.
2.
Turn the
ignition to the
ON (II) position. 3.
Press and hold the unlock side of the
master lock switch for about 10 seconds.
In that time, you will hear three clicks. 4. Within 5 seconds,
turn the ignition to the
LOCK (0) position.
See Customized Settings in your owner’s manual for other programmable settings.
LX, EX, and EX-L
Press and holdthe Info button for 3 seconds to
enter customization mode. Pressthe Info button to
toggle between the different MID displays, then
press SEL/RESET to activate the selected menu.
10 Odyssey TRG_Base:Base 9/24/2009 3:38 PM Page 2 2010 Odyssey

Voice Command/HFL/Navigation
Audio Commands(Accepted on most screens)
Commonly Used Voice Commands (continued)
Climate Control Commands
(Accepted on most screens)
• Brightness up/down
• Volume up/down/min/max/off • Interface dial
feedback on/off
• Guidance prompts min/max/normal
• Radio on
• Radio # FM/AM
• Radio preset
1/2/3/4/5/6
• XM channel # • XM preset 1/2/3/4/5/6
• CD play
• CD play track/disc #
• CD skip forward/back
• Auxiliary (AUX) play
Press and release the NAVI Talk button before you give a command.
Setup Commands
(Accepted on the Setup screen) • Air conditioner
on/off
• Rear defrost on/off
• Climate control recirculate/fresh air • Fan speed up/down
• Temperature #
degrees (# = 57–87)
• Temperature max hot/coldHelp Commands(Accepted on most screens)
• Help (list of available commands for currentscreen)
• Voice command help (from the INFO screen - list of all available navigation, audio, and
climate control commands)
10 Odyssey TRG_Base:Base 9/24/2009 3:41 PM Page 6 2010 Odyssey