navigation system HONDA ODYSSEY 2020 Navigation Manual (in English)

49
System Setup
Location History
H (Home)uNavigationuuSettingsuLocation History
Set the history data usage or clear the travel data.
Select an option.
The following options are available:
•Travel Data Recording: Allows the system to record your travel data used for
predictions.
•Predicted Destination Alert: Sets whether the system provides the predicted
destination.
2Predicted Destination P. 70
•Remove All myTrends Places: Deletes all myTrends places.
•Clear Off-Road Breadcrumbs: Clears off-road breadcrumbs appear on the
map.

50
System Setup
About
H (Home)uNavigationuuSettingsuAbout
Select an option.
The following options are available:
•System Information: Displays the system information.
•EULAs: Displays end-user license agreements.
•Copyright and Acknowledgments: Displays copyright and acknowledgments
information.
•Restore Navigation Settings: Restores navigation settings to the factory
defaults.
2Reset Factory Default Settings P. 51

51
System Setup
Data Reset
Reset Factory Default Settings
H (Home)uNavigationuuSettingsuAbout
You can restore all settings to the factory default values.
1.Select Restore Navigation
Settings.
2.Select Restore.1Reset Factory Default Settings
When you want to reset the following options, see
the below references:
•Home
2Deleting Saved Locations P. 25
•Saved
2Saved Locations P. 19
•Recents
2Recents P. 68
•myTrips
2Saved Trips P. 26
When you transfer the vehicle to a third party, reset
all settings to default and delete all personal data.

54
Navigation
Entering a Destination
H (Home)uNavigationu
This section describes how to enter a destination for route guidance.
Select an option.
The following options are available:
•Keyword or Address, State: Sets a destination by entering a keyword, address
or state name.
2Using the Search Bar P. 56
•Searching near: Selects the city to search near.
2Changing the Search Area P. 57
•Go Home: Sets your home address as the destination.
2Going Home P. 8
•Search Tools: Sets a destination by searching for a place.
2Search Tools P. 60
•Categories: Sets a destination by selecting a category.
2Categories P. 67
•Saved: Sets a destination by selecting a place stored in the Saved list.
2Saved P. 68
•Recents: Sets a destination by selecting a previous destination.
2Recents P. 68
•myTrips: Sets a destination by selecting a saved route.
2myTrips P. 69
1Entering a Destination
The Display Audio system can only provide route
guidance from one navigation system at a time.
When setting a destination on one system, any active
route guidance with the other system is canceled,
and the system you are currently using will direct you
to your destination.
If you press the (Home) button on the steering
wheel, select Navigation and then press the ENTER
button, the following items are available. Use the
steering wheel buttons to select the items.
•Go Home
•Saved•Recent
When en route, the following item is available.
•Cancel Route
(Home) Button

Continued57
uuEntering a Destinationu
Navigation
H (Home)uNavigationuuSearching near
By default, your system finds locations closest to your current location. You can find
a location near another city or location.
Select an option.
The following options are available:
•My Active Route: Searches along your current route.
•My Destination: Searches near your current destination.
•My Current Location: Searches near your current location.
•A Different City: Searches near the city you select.
•Recent Places: Searches near a recent destination.
•Saved Places: Searches near a saved place.
■Changing the Search Area1Changing the Search Area
My Active Route and My Destination can be set
when the route is active.

Continued61
uuEntering a DestinationuSearch Tools
Navigation
H (Home)uNavigationuuSearch ToolsuAddress
Enter an address to use as the destination.
1.Enter the house number and street
name.
uSelect Searching near if you
want to search different city.
2.Select Done or a suggestion.
3.Select your destination from the
list.
4.Select Go! to set the route to your
destination.
2Calculating the Route P. 72
■Finding an Address1Finding an Address
Using Voice Command
You can say the entire address at once using voice
commands.
From the Voice Portal screen, say “Navigation.”
Say “Find Address” on the voice command
screen, then say the entire address. (e.g., “1-2-3-4
Main Street, Los Angeles, California”).
Say “Change Country” if you want to change the
country.
The system interprets the address.
Say “Yes” or a line number of a screen if the
destination list appears (e.g., “1”).
Say “Go” to set the route.
2Using Voice Commands P. 5
2Voice Control Operation P. 11
The order of the steps may change depending on the
map data loaded on your system.

70
uuEntering a DestinationumyTrends
Navigation
myTrends
H (Home)uNavigationuumyTrends
Select a frequently-visited place to use as the destination.
1.Select your destination from the
list.
2.Select Go! to set the route to your
destination.
2Calculating the Route P. 72
When you start the vehicle, the system predicts the most-likely destination based on
your travel data. It displays the notification window to offer the destination and
show related information.
Select Go! to accept the predicted
destination.
1myTrends
Set Travel Data Recording to On to use myTrends
feature.
2Location History P. 49
You can delete myTrends location. Select the location
to remove, select and then select Remove.
To delete all myTrends locations, select without
selecting any location and then select Remove All in
the myTrends list screen.
■Predicted Destination1Predicted Destination
To use this feature, set Predicted Destination Alert
to On.
2Location History P. 49
The notification will be queued in the queue indicator
after a certain period of time. Select the indicator to
display the predicted destination.

72
Navigation
Calculating the Route
This section describes how to calculate your route.
Select Go!.
uThe system calculates and displays
the route line on the map screen.
The following options are available:
•Routes: Displays different routes.
2Viewing and Selecting the Routes P. 73
•Info: Displays detailed location information.
2Viewing the Location Information P. 74
1Calculating the Route
If the route is very long, the system will calculate the
route to the first guidance point and start the
guidance. The system will then continue calculation
to final destination as you proceed.
Select to view the map with the location
centered.

73
uuCalculating the RouteuViewing and Selecting the Routes
Navigation
Viewing and Selecting the Routes
View and select different routes to your destination.
1.Select your desired route.
uThe estimated arrival time and
travel distance are displayed for
each route.
2.Select Go!.
uThe system calculates and
displays the route line on the
map screen.

74
uuCalculating the RouteuViewing the Location Information
Navigation
Viewing the Location Information
1.Select an option.
2.Select Go!.
uThe system calculates and
displays the route line on the
map screen.
The following options are available:
•Save: Adds the destination to the saved location list.
2Saved Locations P. 19
•Set Location: Sets the vehicle position when you are indoors or not receiving
satellite signals.
You can use this feature when GPS Simulator is set to on.
2Navigation P. 40
•Routes: Displays different routes to the destination.
2Viewing and Selecting the Routes P. 73
•Routes Settings: Changes the route preferences.
2Navigation P. 40