display HONDA PILOT 2012 2.G Owners Manual

To go back to the normal playing
display, press the AUDIO button.
Pressing the CANCEL button goes
back to the previous screen and
pressing the MAP button cancels the
audio mode display.
Push the interf ace selector down to
display the AUDIO MENU.
You can select any type of repeat,
random or scan mode on the audio
menu screen. This f unction repeats playback of thetrack.
Push the selector up to display the
‘‘Select a f older

To cancel this f unction, turn the
interf ace dial and select the Repeat
OFFicon,andthenpressENTER.This f unction replays all the tracks in
a f older in the order that they were
stored.On the USB main screen, push the
interf ace selector down to display
the AUDIO MENU.
Turn the interf ace dial to select
Repeat and press ENTER. Turn the interf ace dial, select the
Folder Repeat icon and press
ENTER on the interf ace selector.
Playback of the f older that is
currently being played will be
repeated.
To cancel this f unction, turn the
interf ace dial and select the Repeat
OFFicon,andthenpressENTERon
the interf ace selector.
Turn the interf ace dial, select the
Track Repeat icon and press
ENTER on the interf ace selector.
Playback of the track that is
currently being played will be
repeated.
Pressing either side of the SKIP bar
also cancels this f unction.
3.
3.
1. 2.
FOLDER REPEAT
Playing a USB Flash Memory Device (Models with navigation syst em)
378
FOLDER REPEAT ICON
Main MenuTable of Contents

This f unction plays all the tracks on
theUSBflashmemorydevicein
random order.On the USB main screen, push the
interf ace selector down to display
the AUDIO MENU.
Turn the interf ace dial, select
Random and press ENTER on the
interf ace selector. Turn the interf ace dial, select the
Track Random icon and press
ENTER on the interf ace selector.
The tracks are played in random
order.
To cancel this f unction, turn the
interf ace dial and select the Random
OFFicon,andthenpressENTERon
the interf ace selector.
This f unction plays all of the tracks
in the current f older in random order.On the USB main screen, push the
interf ace selector down to display
the AUDIO MENU.
Turn the interf ace dial, select
Random and press ENTER on the
interf ace selector.
1.
2.
2. 1.
3.
CONT INUED
TRACK RANDOM
FOLDER RANDOM
Playing a USB Flash Memory Device (Models with navigation syst em)
Features
379
TRACK RANDOM ICONRANDOM OFF ICON
FOLDER RANDOM ICON
Main MenuTable of Contents

Turn the interf ace dial, select the
Folder Random icon and press
ENTER on the interf ace selector.
The f iles are played in random
order.
To cancel this f unction, turn the
interf ace dial and select the Random
OFFicon,andthenpressENTERon
the interf ace selector.
This f unction samples all the tracks
in the current f older in the order that
they were recorded.On the USB main screen, push the
interf ace selector down to display
the AUDIO MENU.
Turn the interf ace dial, select the
Scan icon and press ENTER on
the interf ace selector.
On the USB main screen, push the
interface selector up to display the
f older list screen.
Push the interf ace selector down
to ‘‘RANDOM ALL TRACKS

Turn the interf ace dial, select
Folder Scan icon and press
ENTER on the interf ace selector.
The f irst f ile of the f irst f older is
sampled f or 10 seconds. If no other
operations are carried out, the f irst
f iles of the remaining f olders are
played f or 10 seconds. Af ter the f irst
f ile of the last f older is played back,
regular playback is resumed.
To cancel this f unction, turn the
interf ace dial and select the Scan
OFFicon,andthenpressENTERon
the interf ace selector.
This f unction samples the f irst f ile in
each f older within the USB f lash
memory device.
On the USB main screen, push the
interf ace selector down to display
the AUDIO MENU.
Turn the interf ace dial, select the
Scan icon and press ENTER on
the interf ace selector.
Turn the interf ace dial, select
Track Scan icon and press ENTER
on the interf ace selector. Each
track or f ile is sampled f or 10
seconds. When all the tracks in
the f older have been scanned,
regular playback is resumed.
To cancel this f unction, turn the
interf ace dial and select the Scan
OFFicon,andthenpressENTERon
the interface selector to play the last
track sampled.
You can also select the scan feature
with the SCAN button on the control
panel. Press and release the SCAN
button.
1. 2. 3.
3. FOLDER SCAN
Playing a USB Flash Memory Device (Models with navigation syst em)
Features
381
FOLDER SCAN ICON
Main MenuTable of Contents

If you see an error message in the
center display while playing a USB
f lash memory device, f ind the
solution in the chart to the right. If
you cannot clear the error message,
take your vehicle to your dealer.Solution
Error Message
Appears when an unsupported USB flash memory device is inserted.
Appears when the file is copyright protected, such as DRM.
Appears when there are no playable files in the USB flash memory
device.
Appears when the overcurrent protection f eature of the system stops
supplying power to USB because an incompatible device is connected.
Disconnect the device. Then, turn the audio system of f , and turn it on
again. Do not reconnect the device that caused the error.
USB Flash Memory Device Error Messages (Models wit h navigat ion syst em)
Features
383
UNSUPPORTED
UNPLAYABLE FILE
USB NO SONG
BAD USB DEVICE PLEASE CHECK
OWNER’S MANUAL
Main MenuTable of Contents

Onceadeviceislinked,thenameof
thedevicewillappearonthescreen.
Pressing the TITLE button switches
the center display between the
Audio and the device
name.
If more than one phone is paired to
the HFL system, there will be a
delay bef ore the system begins to
play. In the following conditions, the
display shows ‘‘NO CONNECT

The resume/pause mode can stop
playing a f ile temporarily.Turn the interface dial to switch the
setting between the resume/pause
mode and the sound setup mode.
Select Resume/Pause, then press
ENTER to set your selection. Each
time you press ENTER, the system
switches between the resume mode
and pause mode.
Thepausefunctionmaynot
be available on some phone devices.
Press the AUDIO button to display
the audio control display. Turn the
dial to switch the setting between
theresume/pausemodeandthe
sound setup mode. Select Sound
Setup, then press ENTER to set your
selection.
CONT INUED
T o pause or resume a f ile T o change sound set t ings
BluetoothAudio System (Models with navigation system)
Features
387
NOTE:
Main MenuTable of Contents

Turn the dial to select a sound setup
mode, then press ENTER to set your
selection. See page f or more
sound setting inf ormation.
If you receive a call when the
Audio is playing, press the
PICK-UPbuttononthesteering
wheel. The screen and the center
displayswitchtotheHFLmode(see
page ).
Af ter ending the call, press the
HANG-UP button to go back to the
Audio mode. To take the system out of the
Audio mode, press one of
the other source buttons than the
USB/AUX button. When a
compatible audio unit is connected to
the auxiliary input jack, press the
USB/AUX button to select it.
Switching to another mode pauses
the music playing f rom your phone.
309
463
As required by the FCC: This device complies with Part 15 of theFCC rules. Operation is subject to the
f ollowing two conditions: (1) This device may not cause harmf ul interf erence, and(2) this device must accept any
interf erence received, includinginterf erence that may cause undesiredoperation.
Changes or modif ications not expresslyapproved by the party responsible f or
compliance could void the user

ÛÝ´
µ
´µ
´
µ
Three controls f or the audio system
are mounted in the steering wheel
hub. These let you control basic
f unctions without removing your
hand f rom the wheel.
The VOL button adjusts the volume
up ( ) or down ( ). Press the top
or bottom of the button, hold it until
the desired volume is reached, then
release it. If you are playing a disc, the system
skips to the beginning of the next
track each time you press the top
( ) of the CH button. Press the
bottom ( ) to return to the
beginning of the current track. Press
it again to return to the previous
track. You will see the disc and track
numbers in the upper display.
To search up and down f rom the
current f requency and f ind a station
with a strong signal, press the top
( ) or bottom ( ) of the button for
1 second.
The MODE button changes the
mode.
If you are listening to the radio, use
the CH button to change stations.
Each time you press the top ( ) of
the button, the system goes to the
next preset station on the band you
are listening to. Press the bottom
( ) to go back to the previous
station.
Pressing the MODE button
repeatedly cycles through all present,
connected media sources. Media
sources that are not present or
connected will not appear when
cycling with the MODE button.
Pressing the MODE button
repeatedly cycles through all
possible media sources whether they
are present or not.
On vehicles with navigation system
On vehicles without navigation system
Except U.S. LX models
Remote Audio Controls
392
VOL BUTTON
CH BUTTON
MODE BUTTON
Main MenuTable of Contents