HONDA RIDGELINE 2010 1.G Technology Reference Guide
RIDGELINE 2010 1.G
HONDA
HONDA
https://www.carmanualsonline.info/img/13/6034/w960_6034-0.png
HONDA RIDGELINE 2010 1.G Technology Reference Guide
Page 4 of 20
Information Display (models without navigation)Consists of several displays that provide you with useful information.
Once you start the engine, the information display
shows your last active selection from the previous
drive cycle. Information Displays
Accessing the Information Display
Oil life
Outside
temperature,
Instant MPG, Fuel
range, Trip meter
Outside
temperature,
Instant and
average MPG, Trip meter
Outside
temperature,
Odometer,
Trip meter
To toggle between the different displays:
• Press the SELECT button repeatedly
• Press the TRIP/RESET button to switch
between Trip A and B readings.
10 Ridgeline TRG_1ab:ExtraPages.qxd 7/6/2009 10:05 AM Page b1 2010 Ridgeline
Page 5 of 20
Multi-Information Display (MID) (models with navigation)
Upper
displayLower
display
SEL/
RESET
button
Info
buttons
Once you start the engine, the MID shows the last
active selection from the previous drive cycle.
To
toggle between the different displays:
• Press either Info button for the upper display.
• Press the SEL/RESET button for the lower display,
to switch from Trip A to Trip B on the upper display,
or to access sub-displays.
Oil life
Odometer, Trip B
Odometer, Trip A
MID Lower Displays
Accessing the MID
10 Ridgeline TRG_1ab:ExtraPages.qxd 7/6/2009 10:06 AM Page c1 2010 Ridgeline
Page 6 of 20
MID Upper Displays
Basic trip computer displays are shown here.
Instant fuel
economy
Average
speed, Total
travel time
Average MPG,
Fuel range
Main display
Tire Pressure
Monitor*
Bluetooth®
HandsFreeLink®*
Language
selection*
*Press SEL/RESET for sub-displays.
10 Ridgeline TRG_1ab:ExtraPages.qxd 7/6/2009 10:06 AM Page d12010 Ridgeline
Page 8 of 20
Auto Door Locks/
HomeLink®/Rearview
Camera
Auto Door Locking/Unlocking
Default Lock Setting
Modifying the Auto Door Unlock Setting The doors are preset to
lock when your vehicle
reaches about 9 mph.
Default Unlock Setting
Only the driver’s door
is preset to unlock
when you shift into
Park (P).
Follow these steps to program all doors to unlock when you shift into Park:
1. Close the driver’s
door. Shift into
Park. 2.
Turn the ignition
to the ON (II)
position. 3.
Press and hold the unlock side of
the master lock switch for about 10
seconds. In that time, you will hear
three clicks. 4. Within 5 seconds, turn
the ignition to the LOCK
(0) position.
10 Ridgeline TRG_Base:Base 7/6/2009 10:04 AM Page 3 2010 Ridgeline
Page 19 of 20
Voice Command/HFL/Navigation
Audio Commands(Accepted on most screens)
Commonly Used Voice Commands (continued)
Climate Control Commands
(Accepted on most screens)
• Brightness up/down
• Volume up/down/min/max/off • Guidance prompts
min/max/normal
• Radio on
• Radio # FM/AM
• Radio preset
1/2/3/4/5/6
• XM channel # • XM preset 1/2/3/4/5/6
• CD play
• CD play track/disc #
• CD skip forward/back
Press and release the NAVI Talk button before you give a command.
Setup Commands
(Accepted on the Setup screen) • Air conditioner
on/off
• Climate control recirculate/fresh air
• Fan speed up/down • Temperature #
degrees (# = 57–87)
• Temperature max hot/coldHelp Commands(Accepted on most screens)
• Help (list of available commands for currentscreen)
• Voice command help (list of all available navigation, audio, and climate control
commands)
10 Ridgeline TRG_Inside Back2:Inside Back 7/6/2009 1:24 PM Page 6 2010 Ridgeline