height Hyundai Creta 2016 User Guide

2-28
Safety system of your vehicle
Small children are best prot ected from
injury in an accident when prop erly
restrained in the rear seat by a Child
Restraint System that meets the
requirements of t he Safety Standards
of your country. Before buying any Child
Restraint System, make sure that it has
a label certifying that it meets Safety
Standard of your country. The restraint
must be appropriate for your child's
height and weight. Check the label on
the Child Restraint System for this
information. Refer to “Child Restraint
Systems” in this chapter.
Larger children
Children under age 13 and who are
too large for a booster seat must
always occupy the rear seat and use
the available lap/shoulder belts. A
seat belt should lie across the upper
thighs and be snug across the shoul
der and chest to restrain the child
safely. Check belt fit periodically. A
child's squirming could put the belt
out of position. Children are afforded
the most safety in the event of an
accident when they are restrained by
a proper restraint system and/or seat
belts in the rear seat.
If a larger child over age 13 must be
seated in the front seat, the child
must be securely restrained by the
available lap/shoulder belt and the
seat should be placed in the rear
most position.
If the shoulder belt portion slightly
touches the child’s neck or face, try
placing the child closer to the center
of the vehicle. If the shoulder belt still
touches their face or neck, they need
to be returned to an appropriate booster seat in the rear seat.
ALWAYS properly restrain infants
and small children in a Child Restraint
System appropriate for the child’s
height and weight.
To reduce the risk of serious injury or
death to a child and other passen
gers, NEVER hold a child in your lapor arms when the vehicle is moving.
The violent forces created during an
accident will tear the child from your
arms and throw the child against the
interior of the vehicle.
WARNING
•Always make sure larger chil
dren’s seat belts are worn and
properly adjusted.
•NEVER allow the shoulder belt
to contact the child’s neck or
face.
•Do not allow more than one
child to use a single seat belt.
WARNING

2-31
Safety system of your vehicle
2
Children always in the rear
Children under age 13 must always
ride in the rear seats and must
always be properly restrained to min
imize the risk of injury in an accident,
sudden stop or sudden maneuver.
According to accident statistics, chil
dren are safer when properly
restrained in the rear seats than in
the front seat. Children too large for a
Child Restraint System must use the
seat belts provided.Most countries have Child Restraint
Systems which require children to
travel in approved Child Restraint
Systems. The laws governing the
age or height/weight restrictions at
which seat belts can be used instead
of Child Restraint System differs
among countries, so you should be
aware of the specific requirements in
your country, and where you are travelling.
Child Restraint Systems must be
properly placed and installed in the
rear seat. You must use a commer
cially available Child Restraint System
that meets the requirements of the
Safety Standards of your country.
Child Restraint Systems are general
ly designed to be secured in a vehi
cle seat by lap belt or the lap belt
portion of a lap/shoulder belt, or by a
toptether and/or ISOFIX anchorage
in the rear seats of the vehicle.
Child Restraint System (CRS)
always in the rear
Infants and younger children must be
restrained in an appropriate rearward
facing or forwardfacing CRS that has
first been properly secured to the rear
seat of the vehicle. Read and comply
with the instructions for installation
and use provided by the manufacturer
of the Child Restraint System.
CHILD RESTRAINT SYSTEM
•Always follow the Child Restraint
System manufacturer’s instructions
for installation and use.
•Always properly restrain your child
in the Child Restraint System.
•Do not use an infant carrier or a
child safety seat that “hooks” over a
seatback, it may not provide ade
quate protection in an accident.
•After an accident, we recommend a
HYUNDAI dealer check the Child
Restraint System, seat belts,
ISOFIX anchorages and toptether
anchorages.
WARNING
Always properly restrain children
in the rear seats of the vehicle,
unless the air bag on the front
passenger seat is deactivated.
Children of all ages are safer
when restrained in the rear seat. A
child riding in the front passenger
seat can be forcefully struck by an
inflating air bag resulting in SERI
OUS INJURY or DEATH.
WARNING

2-38
Safety system of your vehicle
Child Seat Restraint for Vehicle ISOFIX Positions
Suitability of each seating position for ISOFIX Child Restraint Systems according to ECE regulations.
IUF = suitable for ISOFIX forward child restraints systems of universalcategory approved for use in the mass group.
IL = suitable for particular ISOFIX child restraints systems (CRS) given in the attached list. These ISOFIX CRS are those of the "specific
vehicle", "restricted" or "semiuniversal" categories.
X = ISOFIX position not suitable for ISOFIX child restraint system in this mass group and/or this size class.
* Both ISO/R2 and ISO/R3 are able to be set up only at the foremost position of the passenger seat.
* ISOFIX Child Restraint System size classes and fixtures A ISO/F3: FullHeight ForwardFacing toddler CRS (height 720mm)
B ISO/F2: ReducedHeight ForwardFacing toddler CRS
(height
650mm)
B1 ISO/F2X: ReducedHeight Second Version Back Surface Shape ForwardFacing toddler CRS (height 650mm)
C ISO/R3: FullSize RearwardFacing toddler CRS
D ISO/R2: ReducedSize RearwardFacing toddler CRS
E ISO/R1: InfantSize RearwardFacing CRS
F ISO/L1: Left Lateral Facing position CRS (carrycot)
G ISO/L2: Right Lateral Facing position CRS (carrycot)
Mass Group Size Class Fixture
Vehicle ISOFIX Positions
1st 2nd row
Passenger Left Hand Center Right Hand
Carrycot F ISO/L1
XX
G ISO/L2 XX
0 : UP to 10kg E ISO/R1 IL IL
0+ : UP to 13kg E ISO/R1 IL IL
D ISO/R2 IL IL
C ISO/R3 IL IL
I : 9 to 18kg D ISO/R2 IL IL
C ISO/R3 IL IL B ISO/F2 IUF IUF
B1 ISO/F2X IUF IUF A ISO/F3 IUF IUF

2-41
Safety system of your vehicle
2
Child Seat Restraint Suitability for Seat Position using the Seat Belt
Suitability of each seating position for "universal" category belted Child Restraint Systems according to ECE regulations
Use Child Restraint Systems that have been official ly approved and are appropriate for your children.
When using the Child Restraint Systems, refer to th e following table.
U = Suitable for "universal" category restraints a pproved for use in this
mass group
U* = Suitable for "universal" for
height adjustable seat and should be
adjusted seat cushion & seat back
Not suitable for nonadjustable seat
UF = Suitable for forward facing "universal" categ ory restraints
approved for use in this mass group L = Suitable for particular child restraints given
on attached list. These
restraints may be of the "specific vehicle", "restr icted" or "semiuni
versal" categories.
B = Builtin restraint approved for this mass group .
X = Seat position not suitable for children in this mass group.
Mass Group
Seating Position
Front
Passenger
Outboard
Second Row
Outboard
Left
Center
(3 POINT BELT)
Center
(2 POINT BELT)
Outboard
Right
Group 0
(09months)up to 10kgU*UUUFU
Group 0 +
(02years)up to 13kgU*UUUFU
Group I
(9months4years)9 to 18kgU*UUUFU
Group II
(15 to 25kg)15 to 25kgU*UUUFU
Group III
(22 to 36kg)22 to 36kgU*UUUFU

2-64
Safety system of your vehicle
Adding equipment to or modifyingyour air bagequipped vehicle
If you modify your v ehicle by chang
ing your v ehicle's frame, bumper sys
tem, front end or s ide sheet metal or
r ide height, this may affect the op era
tion of your v ehicle's air bag syst em.Air bag warning label
(if equipped)
Air bag warning labels are attached to
alert the driver and passengers of
potential risks of the air bag system.
Be sure to read all of the information
about the air bags that are installed on
your vehicle in this Owner’s Manual.
OGS035026L

3-86
Convenient features of your vehicle
3
Types of warning indicator and sound
•If an object is in between sensors
or close to a sensor, the displayed
indicator may differ from the above
illustration.
•Do not wash the vehicle's sensor
with high pressure water.
•When you shift into the R
(Reverse) position and one or
more of the below situation occurs,
this may indicate a malfunction
with the parking assist system.
•You don't hear an audible warning
sound or the buzzer sounds inter
mittently.
If this occurs, we recommend that
the system be checked by an
authorized HYUNDAI dealer.
Nonoperational conditions of rear
parking assist system
The rear parking assist system may
not operate normally when:
• Moisture is frozen to the sensor.
• The sensor is covered with dirt or debris such as snow or ice, or the
sensor cover is blocked.
There is a possibility of a parking
assist system malfunction when:
• Driving on uneven road surfaces such as unpaved roads, gravel,
bumps, or gradient.
• Objects generating excessive noise such as vehicle horns, loud motor
cycle engines, or truck air brakes
can interfere with the sensor.
• Heavy rain or water spray is present.
• Wireless transmitters or mobile phones are present near the sensor.
• The sensor is covered with snow.
• Any nonfactory equipment or acces sories have been installed, or if the
vehicle bumper height or sensor
installation has been modified.
NOTICE
Distance fromobjectWarningindicatorWarning sound
120cm ~ 61cm
(47 in. ~ 24 in.)Buzzer beepsintermittently.
60cm ~ 31cm
(24 in. ~ 12 in.)Buzzer beeps
more frequently.
Less than
30 cm (12 in.)Buzzer beeps continuously.
(blinks)
•is displayed. (if equipped)

Antenna
Roof antenna
Ty p e A Your car uses a roof antenna to
receive both AM and FM broadcast
signals. This antenna is a removable
type. To remove the antenna pole,
turn it counterclockwise.
To install the antenna pole, turn it
clockwise. Type B (if equipped) Along with AM and FM broadcast sig-
nals, the shark fin antenna will receive
the transmit data.
(for example : GPS (Global PositioningSystem)
• Before entering a place with a
low height clearance, be sure
that the antenna is removed.
• Be sure to remove the antenna before washing the vehicle in an
automatic car wash or it may be
damaged.
(Continued)(Continued)
• When reinstalling your antenna,
it is important that it is fully tight- ened and adjusted to the upright
position to ensure proper recep-
tion. But it could be removed
when parking the vehicle.
Installation of aftermarket antenna
may result in water leakage, wind
noise, rattling & improper radio
operation. We recommend to use
the antenna available with an
authorized HYUNDAI dealer. Information
Some models do not have audio (plas-
tic blanking cover) system, and will
not supply radio main cable. Thus if
you want to insert Aftermarket audio
or OEM audio to listen radio broad-
casting service, we recommend to use
the feeder cable available with an
authorized HYUNDAI dealer.
i
NOTICE
NOTICE
4-3
Multimedia System
4

5-34
Driving your vehicle
If the Parking Brake Warning Light
remains on after the parking brake is
released while engine is running,
there may be a malfunction in the
brake system. Immediate attention is
necessary.
If at all possible, cease driving the
vehicle immediately. If that is not pos
sible, use extreme caution while
operating the vehicle and only con
tinue to drive the vehicle until you
can reach a safe location.Antilock Brake System (ABS) (if
equipped )
ABS is an electronic braking system
that helps prevent a braking skid.
ABS allows the driver to steer and
brake at the same time.
(Continued)
Drive your vehicle at reduced
speeds during the following condi
tions:
•Rough, gravel or snowcovered
roads.
•On roads where the road sur
face is pitted or has different
surface height.
•Tire chains are installed on your
vehicle.
The safety features of an ABS
equipped vehicle should not be
tested by high speed driving or
cornering. This could endanger
the safety of yourself or others.
An AntiLock Braking System
(ABS) will not prevent accidents
due to improper or dangerous
driving maneuvers. Even though
vehicle control is improved during
emergency braking, always main
tain a safe distance between you
and objects ahead of you. Vehicle
speeds should always be reduced
during extreme road conditions.
The braking distance for cars
equipped with ABS may be longer
than for those without these sys
tems in the following road condi
tions.
(Continued)
WARNING

7-56
Maintenance
Wheel replacement
When replacing the metal wheels for
any reason, make sure the new
wheels are equivalent to the original
factory units in diameter, rim width
and offset.
Replacing tires
To reduce the chance or serious
or fatal injuries from an accident
caused by tire failure or loss of
vehicle control:
•Replace tires that are worn,
show uneven wear, or are dam
aged. Worn tires can cause loss
of braking effectiveness, steer
ing control, and traction.
•Do not drive your vehicle with
too little or too much pressure in
your tires. This can lead to
uneven wear and tire failure.
•When replacing tires, never mix
radial and biasply tires on the
same car. You must replace all
tires (including the spare) if mov
ing from radial to biasply tires.
(Continued)
(Continued)
WARNING •Using tires and wheel other than
the recommended sizes could
cause unusual handling charac
teristics and poor vehicle con
trol, resulting in a serious acci
dent.
•Wheels that do not meet
HYUNDAI's specifications may
fit poorly and result in damage to
the vehicle or unusual handling
and poor vehicle control.
•The ABS works by comparing
the speed of the wheels. Tire
size can affect wheel speed.
When replacing tires, all 4 tires
must use the same size original
ly supplied with the vehicle.
Using tires of a different size can
cause the ABS (Antilock Brake
System) and ESC (Electronic
Stability Control) to work irregu
larly. (if equipped)
A wheel that is not the correct size
may adversely affect wheel and
bearing life, braking and stopping
abilities, handling characteristics,
ground clearance, bodytotire
clearance, snow chain clearance,
speedometer and odometer cali
bration, headlight aim and bumper
height.
WARNING

7-57
7
Maintenance
Tire traction
Tire traction can be reduced if you
drive on worn tires, tires that are
improperly inflated or on slippery
road surfaces. Tires should be
replaced when tread wear indicators
appear. Slow down whenever there
is rain, snow or ice on the road, to
reduce the possibility of losing con
trol of the vehicle.
Tire maintenance
In addition to proper inflation, correct
wheel alignment helps decrease tire
wear. If you find a tire worn unevenly,
have your dealer check the wheelalignment.
When you have new tires installed,
make sure they are balanced. This
will increase vehicle ride comfort and
tire life. Additionally, a tire should
always be rebalanced if it is removed
from the wheel.
Tire sidewall labeling
This information identifies and
describes the fundamental charac
teristics of the tire and also provides
the tire identification number (TIN)
for safety standard certification. The
TIN can be used to identify the tire in
case of a recall.
1. Manufacturer or brand name
Manufacturer or Brand name is shown.
2. Tire size designation
A tire’s sidewall is marked with a tire
size designation. You will need this
information when selecting replace
ment tires for your car. The following
explains what the letters and num
bers in the tire size designationmean.
Example tire size designation:
(These numbers are provided as an
example only; your tire size designa
tor could vary depending on your
vehicle.)
205/65R16 95H
205 Tire width in millimeters.
65 Aspect ratio. The tire’s chapter height as a percentage of its width.
R Tire construction code (Radial).
16 Rim diameter in inches.
95 Load Index, a numerical code associated with the maximum
load the tire can carry.
H Speed Rating Symbol. See the speed rating chart in this chapter
for additional information.
I030B04JM
1
1
23
4
5,6
7