8-6
Specifications & Consumer information
LubricantVolumeClassification
Brake/Clutch fluid 0.7~0.8
l
(0.74~0.85 US qt.) FMVSS116 DOT 3 or DOT 4
Fuel55
l(58.12 US qt.)
*1
: Refer to the recommended SAE viscosity numbers on the next page.
* 2
: Engine oils labeled Energy Conserving Oil are now available. Along with other additional benefits, they contribute to fuel econ
omy by reducing the amount of fuel necessary to overcome engine friction. Often, these improvements are difficult to measure
in everyday driving, but in a year’s time, they can offer significant cost and energy savings.
* 3
: If the ACEA A5 engine oil is not available in your country, you are able to use API SM & ILSAC GF 4 or above (Except Middle
East).
* 4
: If the ACEA B4 engine oil is not available in your country, you are able to use API CH 4 or above.
8-7
8
Specifications & Consumer information
Recommended SAE viscosity
number
Engine oil viscosity (thickness) has
an effect on fuel economy and cold
weather operating (engine start and
engine oil flowability). Lower viscosi
ty engine oils can provide better fuel
economy and cold weather perform
ance, however, higher viscosity
engine oils are required for satisfac
tory lubrication in hot weather. Using
oils of any viscosity other than those
recommended could result in engine
damage. When choosing an oil, consider the
range of temperature your vehicle
will be operated in before the next oil
change.
Proceed to select the recommended
oil viscosity from the chart.
Always be sure to clean the area
around any filler plug, drain plug,
or dipstick before checking or
draining any lubricant. This is
especially important in dusty or
sandy areas and when the vehicle
is used on unpaved roads.
Cleaning the plug and dipstick
areas will prevent dirt and grit from
entering the engine and other
mechanisms that could be dam
aged.
CAUTION
Temperature Range for SAE Viscosity Numbers
Temperature°C
(°F) 3 0 2 0 1 0 0 1 0 2 0 3 0 4 0 5 0
1 0 0 2 0 4 0 6 0 8 0 1 0 0 1 2 0
Diesel
Engine Oil
5W 30
15W 40
10W 30
0W 30
* 1
: For better fuel economy, it is recommended to use the engine oil of a viscosity grade SAE 5W
20 (Except Middle East) or 5W 30 (For Middle East). However, if the engine oil is not available in
your country, select the proper engine oil using th e engine oil viscosity chart.
* 2
: For middle East, do not use engine oil of viscosi ty grade SAE 5W 20.
Gasoline
Engine Oil * 1
20W 50
10W 30
15W 40
5W 20*2, 5W 30
20W 50
10W 30
15W 40
5W 30, 5W 40
Except
Middle East
For
Middle East
