ignition Hyundai Equus 2016 Owner's Manual
[x] Cancel search | Manufacturer: HYUNDAI, Model Year: 2016, Model line: Equus, Model: Hyundai Equus 2016Pages: 477, PDF Size: 16.25 MB
Page 18 of 477

F18
Advanced smart cruise
control system....................5-38
Smart cruise control speed ..5-39
Smart cruise control vehicle-
to-vehicle distance ................5-43
Vehicle-to-vehicle distance
sensor........................................5-45
To convert to the cruise
control mode ...........................5-46
Limitations of the system ....5-47
Lane departure warning
system (LDWS) ...................5-51
LDWS operation......................5-52
Advanced vehicle safety
management (AVSM).........5-55
Blind spot detection system
(BSD)....................................5-58
Operating conditions .............5-59
Warning types .........................5-59
Detecting sensor ....................5-60
Warning message ...................5-61
RCTA (Rear cross traffic
alert) ..........................................5-62
Non-operating condition ......5-63
Economical operation........5-65
Special driving conditions.. 5-67
Hazardous driving
conditions .................................5-67
Rocking the vehicle ...............5-68
Smooth cornering ..................5-69
Driving at night .......................5-69
Driving in the rain ..................5-70
Driving in flooded areas .......5-70
Off-road driving .....................5-70
Highway driving ......................5-71
Winter driving.....................5-72
Snowy or icy conditions .......5-72
Use high quality ethylene
glycol coolant ..........................5-74
Check battery and cables ....5-74
Change to "winter weight"
oil if necessary .......................5-74
Check spark plugs and
ignition system ........................5-74
To prevent the locks from
frozen........................................5-75
Use authorized window
washer anti-freezer solution
in system ..................................5-75
Do not let your parking
brake freeze ............................5-75
Do not let ice and snow
accumulate underneath ........5-75
Carry emergency
equipment.................................5-75
Do not place objects or
materials in the engine
compartment ...........................5-75
Vehicle load limit ................5-76
Tire and loading information
label ...........................................5-76
Certification label ...................5-80
Vehicle weight ....................5-82
Base curb weight ...................5-82
Vehicle curb weight ...............5-82
Load weight .............................5-82
GAW (Gross axle weight) .....5-82
GAWR (Gross axle weight
rating) ........................................5-82
GVW (Gross vehicle weight).. 5-82
GVWR (Gross vehicle
weight rating) ..........................5-82
Trailer towing .....................5-82
Page 31 of 477

Front seat adjustment
The front seat position can be adjust-
ed by pressing the control switches
on the doors. Before driving, adjust
the seat position, as desired, so as to
easily control the steering wheel,
pedals and instrument-panel but-
tons.
The power seat is operated byelectric motors. Pause the motor
operation after each seat-position
adjustment. Excessive motor
operation may damage the elec-
tric equipment.
The operation of a power seat consumes a large amount of elec-
tric power. To prevent unneces-
sary battery drain, when the
engine is turned OFF, do not
adjust the power seat longer than
necessary.
Do not press two power seat con- trol switches or more at the same
time. Doing so may fail the electric
motor or components.
NOTICE
2-4
Safety system of your vehicle
Do not adjust the seat while fastening a seat belt. Moving
the seat cushion forward may
apply strong pressure on the
abdomen.
While adjusting the seat posi- tion, use extreme caution not
to caught hands or other
objects inside the seat com-
ponents.
Do not leave a cigarette lighter on the floor mat or
seat. The operation of seat
adjustment may leak gas out
of the lighter and cause a fire.
Use extreme caution when picking small objects trapped
under the seats or between
the seat and the center con-
sole. Your hands might be cut
or injured by the sharp edges
of the seat mechanism.
WARNING
Do not adjust the seat position,
while fastening a seat belt.
Moving the seat cushion forward
may apply strong pressure on the
abdomen.
CAUTION
The power seat is operable,
even when the ignition is OFF.
Therefore, children should
never be left unattended in the
vehicle.
CAUTION
Page 49 of 477

Seat belt warning (for driver’s seat)
The warning light and the chime will
activate, as in the following table,
when the ignition switch is ON.
*
1The flashing will repeat 11 times at
an interval of 24 seconds. Upon
buckling the driver's seat belt, the
flashing will stop in 6 seconds, and
chime will immediately stop.
*
2The flashing will stop in 6 seconds,
and the chime will immediately
stop.
2-22
Safety system of your vehicle
Any modifications or additions should not be done by a driver.
Such modifications or addi-
tions may make the seat belt
assembly slack, and the seat
belt assembly may not firmly
and tightly tighten.
When fastening a seat belt, be careful not to latch your seat
belt in a buckle of other seats.
It is very dangerous, and you
may not be properly protected
by the seat belt.
Do not unfasten the seat belt, or do not repeatedly fasten
and unfasten the seat belt,
while driving. This may result
in loss of control, and an acci-
dent, causing death, serious
injury, or property damage.
When fastening a seat belt, make sure that it is not fas-
tened over any hard or fragile
object.
Before latching a seatbelt, make sure that there is nothing
inside a buckle, not to block the
mechanism. Otherwise, a seat
belt may not be securely fas-
tened.
WARNING
1GQA2083
ConditionsWarning Pattern
Seat BeltVehicle
SpeedLight-BlinkChime-Sound
Unbuckled6 seconds
Buckled6 secondsNone
Buckled →
Unbuckled
Below 3 mph (5 km/h)6 secondsNone
3 mph~6 mph6 seconds
Above 6 mph (10 km/h)6 sec. on / 24 sec. off (11 times)
Unbuckled
Above 6 mph(10 km/h)
↓
Below 3 mph (5 km/h)
6 seconds *1
↓
Stop *
2
Page 50 of 477

Seat belt warning (for front passenger's seat)
To remind the front passenger, the
front passenger's seat belt warning
light will flash, whenever you turn ON
the ignition switch regardless of belt
fastening. When the passenger's
seat belt is unfastened, when the
vehicle drives over 6 mph (10 km/h),
and when occupant presence is
detected, the passenger's seat belt
warning light will flash until being fas-
tened.
3-point system with emergencylocking retractor
To fasten your seat belt:
Pull the belt webbing out of the
retractor and insert the metal tab (1)
into the buckle (2). It will "click" when
the tab locks into the buckle. The
seat belt automatically adjusts to the
proper length only after the lap por-
tion of the belt is manually adjusted
so that it fits snugly around your
body. If you lean forward slowly and
comfortably, the belt will extend and
move with you. If there is a sudden
stop or impact, the belt will be
locked. It will be also locked if you try
to lean forward too quickly.
Information
When a seat belt is not smoothly
stretched from the retractor, pull it
hard and release. After this, the seat
belt can be smoothly stretched.
i
2-23
Safety system of your vehicle02
OVI035081N
Riding in an improper position
adversely affects the front pas-
senger's seat belt warning sys-
tem. It is important for the driv-
er to properly instruct the pas-
sengers, as in this manual.
WARNING
OVI035108N
Page 54 of 477

Information
The sensor, which triggers the SRS air
bag activation, is connected with the
pretensioner seat belt. The SRS air
bag warning light on the instru-
ment panel will illuminate for approx-
imately 6 seconds, when the ignition
switch is turned ON. This will be auto-
matically turned OFF.
Even when there is not malfunc-
tion of the SRS air bag, but the
malfunction of the pre-tensioner
seat belt, the warning light will
illuminate. When the SRS air bag
warning light does not illuminate
after turning ON the ignition
switch, when it remains illuminat-
ed approximately for more than 6
seconds, or when it remains illus-
trated while driving, immediately
have an authorized EQUUS dealer
inspect the pre-tensioner seat belt
and SRS air bag system.
NOTICE
i
2-27
Safety system of your vehicle02
Pre-tensioners are designedto operate only one time. After
activation, pre-tensioner seat
belts must be replaced. All
seat belts of any type should
always be replaced after a col-
lision.
The pre-tensioner seat belt assembly mechanism gets hot
while being activated. Do not
touch the pre-tensioner seat
belt assembly for several min-
utes after its activation.
Do not attempt to inspect or replace the pre-tensioner seat
belt by yourself. This must be
done by an authorized EQUUS
dealer.
Do not hit hard the pre-ten- sioner seat belt assemblies.
Never attempt to maintain or repair the pre-tensioner seat
belt system in any manner.
Improper handling of preten- sioner seat belt assemblies,
and failure to heed the warn-
ings not to hit, modify, inspect,
replace, maintain or repair the
pre-tensioner seat belt assem-
blies may lead to improper
operation, malfunction and
serious injury.
Always fasten a seat belt, while the vehicle is in motion.
When the pre-tensioner seat belt needs to be discarded,
contact an authorized EQUUS
dealer.
WARNING
Page 71 of 477

Noise and smoke
When the air bags inflate, they pro-
duce not only a loud noise, but also
smoke and powder inside the vehi-
cle. This is normal and is a result of
the ignition of the air bag inflator.
After the air bag inflates, you may
feel substantial discomfort, while
breathing due to the contact of your
chest with both the seat belt and the
air bag, as well as from inhaled
smoke and powder.Open your
doors and windows as soon as
possible after air bag deployment
in order to reduce your discomfort
and prevent prolonged exposure
to the smoke and powder.
Though the smoke and powder are
non-toxic, they may cause skin irrita-
tion (i.e. eyes, nose and throat). In
this case, immediately wash your
skin with cold water and consult a
doctor if the symptom persists.
Do not install a child restraint in the front passenger's seat.
Never place a rear-facing child
restraint in the front passenger’s
seat. When an air bag deploys, it
would impact the rear-facing child
restraint, causing serious or fatal
injury. In addition, do not place front-
facing child restraints in the front
passenger’s seat, either. When the
front passenger air bag inflates, it
may cause serious or fatal injury to
the child.
2-44
Safety system of your vehicle
After the air bag inflation, air-
bag related components, which
are on the steering wheel,
instrument panel, roof rails
above doors and the front seat-
backs, are very hot. To prevent
injury, do not touch those com-
ponents inside the air bag stor-
age right after air bag inflation.
WARNING
1JBH3051
Extremely Hazard! Do not place a rear-facing child
restraint in a seat protected
by an air bag!
Never install a child restraint in the front passenger’s seat.
When the front passenger air
bag inflates, it may cause seri-
ous or fatal injury.
(Continued)
WARNING
Page 73 of 477

The SRS air bag warning light " "
on the instrument panel will illumi-
nate for approximately 6 seconds
after the Engine Start/Stop Button is
turned ON. Soon, the SRS air bag
warning light " " turns OFF.The front air bag modules are locat-
ed inside the center of the steering
wheel, the front passenger's panel
above the glove box, and the driver’s
side knee bolster. When the SRSCM
detects sufficient impact from the
front of a vehicle, it automatically
deploys the front air bags.
During an air bag deployment, tear
seams, which are directly molded
under the pad cover, will break apart
under pressure. Opening of the cover
allows full inflation of air bags.
2-46
Safety system of your vehicle
W7-147
When any of the following con-
ditions occurs, this indicates a
SRS malfunction. Have an
authorized EQUUS dealer
inspect the air bag system as
soon as possible.
The light does not turn ON,
right after turning ON the igni-
tion.
The light remains illuminated after approximately 6 sec-
onds.
The light remains illuminated, when the vehicle is in motion.
The light flashes, when the ignition switch is ON.
WARNING
OVI035117N
Driver’s front air bag (1)
OVI035118N
Driver’s front air bag (2)
Page 75 of 477

Occupant classification system
Your vehicle is equipped with an
occupant classification system in the
front passenger's seat. The occupant
classification system is designed to
detect the presence of a properly-
seated front passenger and deter-
mine whether to inflate the front pas-
senger's air bag or not. The driver's
front air bag is not affected or con-
trolled by the occupant classification
system.
2-48
Safety system of your vehicle
OVI035080N
When an air bag deploys,there may be a loud noise with
fine dust released inside the
vehicle. These conditions are
normal and not hazardous -
the air bags are packed in fine
powder. The dust released
during air bag deployment
may cause skin or eye irrita-
tion as well as aggravate asth-
ma for some occupants.
Thoroughly wash all exposed
skin areas with warm water
and mild soap after an acci-
dent in which the air bags
deploy.
The SRS operates, only when the ignition switch is ON.
When the SRS air bag warning
light " " does not illuminate,
and when it continuously
remains ON for more than 6
seconds after turning ON the
ignition switch or starting the
engine, the SRS does not
properly operate. In this case,
have your vehicle immediately
inspected by an authorized
EQUUS dealer.
Before you replace a fuse or disconnect a battery terminal,
turn the Engine Start/Stop
Button OFF. Never remove or
replace the air bag related
fuse(s) when the Engine
Start/Stop Button is ON.
Failure to follow this warning
may cause the SRS air bag
warning light " " to illumi-
nate.
CAUTION
Page 184 of 477

Warning lightsInformation
Make sure that all warning lights are
turned OFF after starting the engine.
When any light remains ON, this indi-
cates the situation that your attention
is required.
Supplemental RestraintSystem Warning Light
This warning light illuminates:
Once you turn ON the ignition
switch or Engine Start/Stop but-
ton.
- It illuminates for approximately 6seconds and then goes OFF.
When there is a malfunction with the SRS.
In this case, have your vehicle
inspected by an authorized
EQUUS dealer.
Seat Belt Warning Light
This warning light informs the driver
that the seat belt is not fastened.
❈For further information, refer to the
“Seat Belts” in the chapter 2.
Parking Brake & Brake
Fluid Warning Light
This warning light illuminates:
Once you turn ON the ignition
switch or Engine Start/Stop but-
ton.
- It illuminates for approximately 3seconds.
- It remains ON, when the parking brake is set.
When the parking brake is set.
When the brake fluid level in the reservoir is low.
- When the warning light illumi-nates with the parking brake
released, it indicates the brake
fluid level in reservoir is low.
When the brake fluid level in the
reservoir is low:
1. Drive carefully to the nearest safe location and stop your vehicle.
2. Stop the engine, immediately check the brake fluid level and add
fluid, as required (For further infor-
mation, refer to "Brake Fluid" in the
chapter 7). Then check all brake
components for fluid leaks. When
any leak in the brake system is still
detected, when the warning light
remains ON, or when the brakes
do not properly operate, do not
drive the vehicle.
In this case, have your vehicle
inspected by an authorized
EQUUS dealer.
i
W W A
AR
RN
N I
IN
N G
G
A
A N
N D
D
I
IN
N D
DI
IC
C A
A T
TO
O R
R
L
L I
IG
G H
H T
TS
S
3-89
Convenient features of your vehicle03
Page 185 of 477

Dual-diagonal braking system
Your vehicle is equipped with dual-
diagonal braking systems. This
means you still have braking on two
wheels even if one of the dual sys-
tems fails.
With only one of the dual systems
working, longer pedal travel and
greater pedal pressure may be
required to stop the vehicle.
Also, the vehicle will not stop in as
short a distance only with one por-
tion of the brake systems working.
If the brakes fail while you are driv-
ing, shift to a lower gear for addition-
al engine braking and stop the vehi-
cle as soon as it is safe to do so.
Anti-lock Brake System(ABS) Warning Light
This warning light illuminates in
one of the following situations:
You turn ON the ignition switch or
Engine Start/Stop button.
- It illuminates for approximately 3seconds and then goes OFF.
There is a malfunction with the ABS (The normal braking system
is still operational without the
assistance of the anti-lock brake
system).
In this case, have your vehicle
inspected by an authorized
EQUUS dealer.
Electronic Brake forceDistribution (EBD)System Warning Light
These two warning lights illuminate
at the same time while driving in
the following situation:
The ABS and the regular brake
system may not properly operate.
In this case, have your vehicle
inspected by an authorized
EQUUS dealer.
3-90
Convenient features of your vehicle
- Parking Brake & Brake Fluid Warning Light
Driving the vehicle with a warn-
ing light ON is dangerous. If the
Parking Brake & Brake Fluid
Warning Light illuminates with
the parking brake released, it
indicates that the brake fluid
level is low.
In this case, have your vehicle
inspected by an authorized
EQUUS dealer.
WARNING