key Hyundai Genesis Coupe 2013 Owner's Guide

491
Features of your vehicle
INTERIOR LIGHTMap lamp
Push the lens to turn the map lamp on or
off. This light produces a spot beam for
convenient use as a map lamp at night or
as a personal lamp for the driver and the
front passenger. : The light comes on when any
door (or trunk) is opened
regardless of the ignition switch
position. When doors are
unlocked by the transmitter (or
smart key), the light comes on
for approximately 30 seconds
as long as any door is not
open. The light goes out gradu-
ally after approximately 30 sec-onds if the door is closed.
However, if the ignition switch
is ON or all doors are locked,
the light will turn off immediate-
ly. If a door is opened with the
ignition switch in the ACC or
LOCK position, the light stays
on for about 20 minutes.
However, if a door is opened
with the ignition switch in the
ON position, the light stays on
continuously.
CAUTION
Do not use the interior lights for
extended periods when the engine
is not running.
It may cause battery discharge.
OBK049055N
WARNING
Do not use the interior lights when
driving in the dark. Accidents could
happen because the view may be
obscured by interior lights.

4151
Features of your vehicle
(Continued) If you use devices such as a USB hub purchased separately, thevehicle’s audio system may notrecognize the USB device. In that
case, connect the USB devicedirectly to the multimedia termi-nal of the vehicle.
If the USB device is divided by logical drives, only the music fileson the highest-priority drive arerecognized by car audio.
Devices such as MP3 Player/ Cellular phone/Digital camera can
be unrecognizable by standardUSB I/F can be unrecognizable.
Charging through the USB may not be supported in some mobile
devices.
❋
❋ A car exclusive cable (Provided
or sold separately) is requiredto use the iPod.
Some non-standard USB devices (METAL COVER TYPE USB) can
be unrecognizable.
Some USB flash memory readers (such as CF, SD, microSD, etc.) orexternal-HDD type devices can beunrecognizable.
(Continued)
(Continued) Music files protected by DRM (DIGITAL RIGHTS MANAGE-MENT) are not recognizable.
The data in the USB memory may be lost while using this audio.Always back up important data ona personal storage device.
A SD-to-USB adapter may not work with the car audio system.
Please avoid using USB memory products which can be used askey chains or cellular phone accessories as they could cause
damage to the USB jack. Pleasemake certain only to use plugtype connector products asshown below.

4157
Features of your vehicle
1. Press button to enter SETUPmode.
2. Select “Phone”, then “Pair” in PHONE menu.
3. The audio displays “searching ---- passkey: 0000”
4. Search the
Bluetooth ®Wireless
Technology system on your phone.
Your phone should display your [vehi-cle model name] on the
Bluetooth ®Wireless Technology device list. Then
attempt pairing on your phone.
NOTE:
If the phone is paired to two or more
vehicles of the same model, i.e. both
vehicles are HYUNDAI GENESIS
COUPE, some phones may not handle
Bluetooth ®Wireless Technology
devices of that name correctly. In this
case, you may need to change the
name displayed on your phone fromGENESIS COUPE to GENESISCOUPE1 and GENESIS COUPE2.
Refer to your phone’s User’s Guide, or
contact your cellular carrier or phone
manufacturer for instructions. When the
Bluetooth
®Wireless
Technology system is enabled, the
phone previously used is automatically
selected and re-connected. If you want to
select different phone previously paired,the phone can be selected through
“Select Phone” menu.Only a selected phone can be used with
the hands-free system at a time.
1. Press button to enter SETUP
mode.
2. Select “Phone”, then “Select” in PHONE menu.
3. Select desired phone name from the
list shown.
The paired phone can be deleted.
- When the phone is deleted, all the infor- mation associated with that phone isalso deleted (including phonebook).
- If you want to use the deleted phone with the audio system again, pairing
procedure must be completed once
more.
1. Press button to enter SETUP mode.
2. Select “Phone”, then “Delete” in PHONE menu.
3. Select desired phone name from the list shown.
If several phones are paired with theaudio system, the system attempts to
connect following order when the
Bluetooth
®Wireless Technology system
is enabled:
1) “Priority” checked phone.
2) Previously connected phone
3) Gives up auto connection.
1. Press button to enter SETUP
mode.
2. Select “Phone”, then “Priority” in PHONE menu.
3. Select desired phone name from the
list shown.

Bluetooth ®Wireless
Technology ON/OFF
Bluetooth ®Wireless Technology system
can be enabled (ON) or disabled (OFF)
by this menu. - If
Bluetooth ®Wireless Technology is
disabled, all the commands related to
Bluetooth ®Wireless Technology system
prompts whether you wish to turn
Bluetooth ®Wireless Technology ON or
not.
1. Press button to enter SETUP mode.
2. Select “Phone”, then “BT Off ” in
PHONE menu.
SETUPCLOCK
SETUPCLOCK
SETUPCLOCK
SETUPCLOCK
SETUP
CLOCK

Features of your vehicle
164
4
Dialing by Number
The system will make a phone call by
dialing the spoken numbers.
The system can recognize single digits
from zero to nine.
1. Press the button.
2. Say “Call”.
3. Say “Number”.
4. Say “”.
5. Say “”.
6. Say “Dial”.
✽✽ Tip
A shortcut to each of the following func- tions is available.1. Say “Dial number”.2. Say “Dial ”.
■ Receiving a phone call
When receiving a phone call, a ring tone is heard and the system changes to tele-
phone mode. When receiving a phone
call, the phone number and the message
“Incoming” will be displayed.
Press the send switch to take the call.
or “- ” on the steering volume controls.
Volume adjustment cannot be made using the audio system.
The received call can be transferredfrom the hands-free system to the cel-lular phone that is connected to
Bluetooth®Wireless Technology.
For details, please refer to you user's
manual for the cellular phone or go to
the Key matrix in this manual (nextpage). ■
Talking on the phone
When talking on the phone, the display
will differ depending on whether or not
the vehicle is in motion.
Number and "active call" is displayed.When the call is finished, press the end
switch.
✽✽ NOTICE
In the following situations, your voice
may not reach the other party:
1. When talking alternately with the other party on the phone. If you talkat the same time, the voice may not
reach the other parties. (This is not amalfunction.)
2. When keeping the volume of incom-
ing voice to a low level. Otherwise,
high volumes may result in an echo.When you talk on the phone, speak
clearly towards the microphone.
3. When driving on a rough road.
4. When driving at high speeds.
5. When the window is open.
6. When the air conditioning vents are facing the microphone.
7. When the sound of the air condition-
ing fan is loud.

4165
Features of your vehicle
■ Key matrix
No.
Disconnected(BT Icon off) Connected (BT Icon On)
Paired H/P Empty Paired H/P
Exist
1 SHORT
LONG
SHORT
LONG
STEERING
MODE KEY
AUDIO
POWER KEY Incoming Call
Outgoing Call Active CallTRANSFER
CALL
Connected
KEY
--
Reject Call End Call End Call End Call
-------
No phone
paired Please pair a phone No phone
connected Please connect phone Please say a
command
Call/Dial/Redial/ Help ----
-------
-------
-------
No phone
paired Please pair a phone No phone
connected Please connect phone Please say a
command Accept Call
---
4 5
2
3
SHORT
LONG
-- Transfer Call
(Handsfree <->Phone)

Features of your vehicle
166
4
Min Volume mininmum
Max Volume maxinmum
Auto Store Automatically selects and saves
channels
Loading CD Loading CD
Reading CD Reading CD
Ejecting CD Ejecting CD
Insert CD Insert CD
Disc Check It is just the warning. After initial
boot, And then push CD button
Audio will check the disk
Changing CD Changing CD
No Disc Empty CD in audio
Disc Full All 6 disces have already beeninserted.
Eject a previously inserted CD
to insert new CD
Track Audio CD song order
No Media Empty media file in CD
Disc Title Disc title name
Disc Artist Disc artist name
Track Title Track Title name
Track Artist Track artist name
Total Tracks Number of tracks in the CD SCAN All the songs on the CD are
played 10 seconds sequentially
RPT Audio play mode of Reapeat
RDM Audio play mode of Random
NO Song Empty song File in USB
Reading USB Reading USB
File Name File Name,MP3 file currently
being played
Title Song name,MP3 file currently
being played
Artist Artist name,MP3 file currently
being played
Album Album name,MP3 file currently
being played
Folder This is a folder name, MP3 file currently being played is in this
folder
Total Files Total number of files being
played
Loading IPOD Loading IPOD
Folder Menu If you push the up/down key in the foilder key, you can enter
the Menu mode
Connected Connecting aux
MP3 Play Play MP3 in phone paired
Please Wait Please Wait
Pairing Fail Audio & Phone connection
have failed
Connecting Connecting Audio & Phone
Connection Audio & Phone connection
have succeed
Connection FailedAudio & Phone connection
have failed
Call EndedHang up the your mobile phone
Complete

5
Before driving / 5-3 Key / 5-5
Engine Start/Stop button / 5-8Manual transmission / 5-13Automatic transmission / 5-17Brake system / 5-24
Cruise control system / 5-35Economical operation / 5-39Special driving conditions / 5-41
Winter driving / 5-46
Vehicle weight / 5-50
Trailer towing / 5-51
Driving your vehicle

55
Driving your vehicle
Illuminated ignition switch
Whenever a front door is opened, the
ignition switch will be illuminated for your
convenience, provided the ignition switch
is not in the ON position. The light will go
off immediately when the ignition switch
is turned on or go off after about 30 sec-onds when the door is closed.Ignition switch position
LOCK
The steering wheel locks to protect
against theft. The ignition key can be
removed only in the LOCK position.
When turning the ignition switch to the
LOCK position, push the key inward at
the ACC position and turn the key towardthe LOCK position.
ACC (Accessory)
The steering wheel is unlocked and elec-
trical accessories are operative.
✽✽
NOTICE
If difficulty is experienced turning the
ignition switch to the ACC position, turnthe key while turning the steering wheel
right and left to release the tension.
ON
The warning lights can be checked
before the engine is started. This is the
normal running position after the engine
is started.
Do not leave the ignition switch ON if the engine is not running to prevent the bat-tery from discharging.
START
Turn the ignition switch to the START
position to start the engine. The engine
will crank until you release the key; then
it returns to the ON position. The brake
warning lamp can be checked in thisposition.
KEY
OBK059001NOUN036002

57
Driving your vehicle
1. Make sure the parking brake isapplied.
2. Manual Transmission - Depress the
clutch pedal fully and shift the trans-
mission into Neutral. Depress the
brake and clutch pedal fully.
Automatic Transmission - Place the
transmission shift lever in P (Park).
Depress the brake pedal fully.
You can also start the engine when
the shift lever is in the N (Neutral)position.
3. Turn the ignition switch to START and hold it there until the engine starts (a
maximum of 10 seconds), then
release the key.
4. In extremely cold weather (below -18°C / 0°F) or after the vehicle has
not been operated for several days, let
the engine warm up without depress-
ing the accelerator.
Whether the engine is cold or warm, it
should be started without depressing
the accelerator.
CAUTION
If the engine stalls while you are in motion, do not attempt to move the
shift lever to the P (Park) position. Iftraffic and road conditions permit,you may put the shift lever in the N (Neutral) position while the vehicle
is still moving and turn the ignitionswitch to the START position in anattempt to restart the engine.
CAUTION
Do not engage the starter for morethan 10 seconds. If the engine stalls
or fails to start, wait 5 to 10 secondsbefore re-engaging the starter.Improper use of the starter may damage it.

511
Driving your vehicle
1. Carry the smart key or leave it insidethe vehicle.
2. Make sure the parking brake is firmly applied.
3. Manual Transmission - Depress the
clutch pedal fully and shift the trans-
mission into Neutral. Depress the
brake and clutch pedal fully.
Automatic Transmission - Place the
transmission shift lever in P (Park).
Depress the brake pedal fully.
You can also start the engine when
the shift lever is in the N (Neutral)position.
4. Press the engine start/stop button.
5. In extremely cold weather (below - 18°C / 0°F) or after the vehicle has not
been operated for several days, let the
engine warm up without depressing
the accelerator.
Whether the engine is cold or warm, itshould be started without depressing
the accelerator.
Even if the smart key is in the vehicle,
if it is far away from you, the engine
may not start.
When the engine start/stop button is in
the ACC or ON position, if any door is
open, the system checks for the smart
key. If the smart key is not in the vehi-
cle, and if all doors are closed, the
chime will sound for about 5 seconds.
Keep the smart key in the vehicle,
when using the ACC position or if the
vehicle engine is on.
WARNING
The engine will start by pressing
the engine start/stop button, only
when the smart key is in the vehi-
cle. Never allow children or any per-son who is unfamiliar with the vehi-
cle to touch the engine start/stop
button or related parts.CAUTION
If the engine stalls while you are in motion, do not attempt to move the
shift lever to the P (Park) position. Iftraffic and road conditions permit,you may put the shift lever in the N(Neutral) position while the vehi-
cle is still moving and press theengine start/stop button in anattempt to restart the engine.