bluetooth Hyundai Genesis Coupe 2013 Owner's Manual

Features of your vehicle
134
4
■■
CD Changer : FOR EUROPE
AC600DKEG / AC610DKEG / AC600DKEE / AC611DKEE /AC610DKEE
❋ NO , Iogo will be shown if the Bluetooth ®Wireless Technology , RDS feature is not supported.

4135
Features of your vehicle
❋ NO Iogo will be shown if the Bluetooth ®Wireless Technology feature is not supported.
■■

CD Changer : FOR GENERAL
AC600DKMG / AC600DKMN / AC600DKGE / AC600DKGG / AC610DKMG / AC610DKMN / AC610DKGE /
AC610DKGG / AC601DKGG / AC611DKGG / AC600DKGL / AC610DKGL

Features of your vehicle
136
4
■■
CD Player : FOR EUROPE
AC100DKEE / AC110DKEE / AC100DKEG / AC110DKEG / AC111DKEE / AC101DKEE
❋ NO , Iogo will be shown if the Bluetooth ®Wireless Technology , RDS feature is not supported.

4137
Features of your vehicle
❋ NO Iogo will be shown if the Bluetooth ®Wireless Technology feature is not supported.
■■

CD Player : FOR GENERAL
AC100DKMG / AC100DKMN / AC100DKGE / AC100DKGG / AC110DKMG / AC110DKMN / AC110DKGE /
AC110DKGG / AC101DKGG / AC111DKGG / AC100DKGL / AC110DKGL

Features of your vehicle
142
4

Select this item to enter Clock setup
mode. (12/24Hr.,Auto, Time)

Select “12/24 Hr.” button to enter Time
Format menu.

Select “Auto” button to enter Automatic
RDS Time menu.

Select this item to enter SETUP mode.
Refer to “PHONE OPERATION” section
for detailed information. ❈ “PHONE” menu is not available if the
audio does not support
Bluetooth®
Wireless Technology features. 11. PRESET Buttons
Push ~ buttons less than 0.8
second to play the channel saved in each
button. Push Preset button for 0.8 sec-
ond or longer to save current channel to
the respective button with a beep.
12. Button
Moves button
when
searching PTY in RDS Broadcasting
Program Type selection.
Moves button when
searching PTY in RDS Broadcasting
Program Type selection.
❈ Button for RDS Model
13 & Knob
Within the screen displayed after first
pressing the knob, turn the knob to select
the mode. The modes will change inorder of BASS ↔MIDDLE ↔TREBLE
↔ FADER ↔BALANCE.
❈ For EUROPE
PTY
FOLDER
PTY
FOLDERPTY
61

4155
Features of your vehicle
Bluetooth®Wireless Technology
PHONE OPERATION (if equipped)
1. button : Raises or lowers speaker volume.
2. button : Mute the microphone during a call.
3. button : Places and transfers calls.
4. button : Ends calls or cancels functions. ■
What is Bluetooth®Wireless
Technology?
Bluetooth ®Wireless Technology is a wire-
less technology that allows multiple
devices to be connected in a short range,
low-powered devices like hands-free,stereo headset, wireless remote control,
etc. For more information, visit the
Bluetooth ®Wireless Technology website
at www.Bluetooth.com
■■ General Features

Bluetooth®Wireless Technology hands-free and
stereo-headset features.
- HANDS-FREE feature: Making or receiving calls wirelessly.
- STEREO-HEADSET feature: Playing music from cellular phones (that sup-
ports A2DP feature) wirelessly.
✽✽ NOTICE

Features of your vehicle
156
4
■ Phone Setup
All
Bluetooth ®Wireless Technology-relat-
ed operations can be performed in
PHONE menu.
1) Push the button to enter SETUP mode.
❈ For EUROPE
❈ Except EUROPE 2) Rotate the knob to move thecursor
between items and push the button to select "Phone".
3) Rotate the knob to move the cursor between items and push the button toselect a desired item.
❈ For EUROPE
❈ Except EUROPE
Before using Bluetooth
®Wireless
Technology features, the phone must bepaired (registered) with the audio sys-
tem. Up to 5 phones can be paired withthe system.
NOTE:
varies according to each phone
model. Before attempting to pair
phone, please see your phone’s
User’s Guide for instructions.
pleted, there is no need to pair with
that phone again unless the phone
is deleted manually from the audio
system (refer “Deleting a Phone”
section) or the vehicle’s information
is removed from the phone.
SETUPCLOCK

4157
Features of your vehicle
1. Press button to enter SETUPmode.
2. Select “Phone”, then “Pair” in PHONE menu.
3. The audio displays “searching ---- passkey: 0000”
4. Search the
Bluetooth ®Wireless
Technology system on your phone.
Your phone should display your [vehi-cle model name] on the
Bluetooth ®Wireless Technology device list. Then
attempt pairing on your phone.
NOTE:
If the phone is paired to two or more
vehicles of the same model, i.e. both
vehicles are HYUNDAI GENESIS
COUPE, some phones may not handle
Bluetooth ®Wireless Technology
devices of that name correctly. In this
case, you may need to change the
name displayed on your phone fromGENESIS COUPE to GENESISCOUPE1 and GENESIS COUPE2.
Refer to your phone’s User’s Guide, or
contact your cellular carrier or phone
manufacturer for instructions. When the
Bluetooth
®Wireless
Technology system is enabled, the
phone previously used is automatically
selected and re-connected. If you want to
select different phone previously paired,the phone can be selected through
“Select Phone” menu.Only a selected phone can be used with
the hands-free system at a time.
1. Press button to enter SETUP
mode.
2. Select “Phone”, then “Select” in PHONE menu.
3. Select desired phone name from the
list shown.
The paired phone can be deleted.
- When the phone is deleted, all the infor- mation associated with that phone isalso deleted (including phonebook).
- If you want to use the deleted phone with the audio system again, pairing
procedure must be completed once
more.
1. Press button to enter SETUP mode.
2. Select “Phone”, then “Delete” in PHONE menu.
3. Select desired phone name from the list shown.
If several phones are paired with theaudio system, the system attempts to
connect following order when the
Bluetooth
®Wireless Technology system
is enabled:
1) “Priority” checked phone.
2) Previously connected phone
3) Gives up auto connection.
1. Press button to enter SETUP
mode.
2. Select “Phone”, then “Priority” in PHONE menu.
3. Select desired phone name from the
list shown.

Bluetooth ®Wireless
Technology ON/OFF
Bluetooth ®Wireless Technology system
can be enabled (ON) or disabled (OFF)
by this menu. - If
Bluetooth ®Wireless Technology is
disabled, all the commands related to
Bluetooth ®Wireless Technology system
prompts whether you wish to turn
Bluetooth ®Wireless Technology ON or
not.
1. Press button to enter SETUP mode.
2. Select “Phone”, then “BT Off ” in
PHONE menu.
SETUPCLOCK
SETUPCLOCK
SETUPCLOCK
SETUPCLOCK
SETUP
CLOCK

Features of your vehicle
158
4
■■
Receiving a Phone Call
When receiving a phone call, a ringtone
is audible from speakers and the audio
system changes into telephone mode.
When receiving a phone call, “Incoming”
message and incoming phone number (if
available) are displayed on the audio.

- Press button on the steering wheel.

- Press button on the steering wheel.

- Use VOLUME buttons on the steering wheel.
Call):
- Press and hold button on the steering wheel until the audio system
transfers a call to the phone. ■
Talking on the Phone
When talking on the phone, “Active Calls”
message and the other party’s phone
number (if available) are displayed on the
audio.

- Press button on the steering wheel.

- Press button on the steering wheel. ■■
Making a Phone Call
A Call Back can be made by pressing button on the steering wheel.
- This is the same function as using the
button solely on the cellular
phone.
NOTE: Some phone models require pressing button twice to make a call.
✽✽NOTICE
In the following situations, you or the
other party may have difficulty hearingeach other:
1. Speaking at the same time, your voice
may not reach each other parties.(This is not a malfunction.) Speak
alternately with the other party on thephone.
2. Keep the Bluetooth®
Wireless
Technology volume to a low level.
High-level volume may result in dis-tortion and echo.
3. When driving on a rough road.
4. When driving at high speeds.
5. When the window is open.
6. When the air conditioning vents are
facing the microphone.
7. When the sound of the air condition-
ing fan is loud.
MUTE

4159
Features of your vehicle
■■Bluetooth®Wireless Technology
Audio Music Streaming
This audio system supports A2DP (Audio
Advanced Distribution Profile) and
AVRCP (Audio Video Remote ControlProfile).
Both profiles are available for listening to
the MP3 music via
Bluetooth ®Wireless
Technology cellular phone supporting
above
Bluetooth ®Wireless Technology
profiles.
To play MP3 music from the
Bluetooth ®Wireless Technology cellular phone,
press the button until “MP3
Play” is displayed on the LCD.
Then try playing music by phone.
When playing music from the Bluetooth
®
Wireless Technology cellular phone, the
head unit displays MP3 MODE. NOTE:
Not only MP3 files, all the sounds
that the phone supports can be
heard by the audio system.
The
Bluetooth ®Wireless Technology
cellular phones shall feature A2DP
and AVRCP functions.
Some A2DP and AVRCP
Bluetooth ®Wireless Technology cellular
phones may not play music through
the head unit on first try. Please try
the below;
i.e : Menu
➟
➟
Filemanager ➟➟
Music ➟➟
Option ➟➟

Play via Bluetooth ®
Wireless Technology
Please refer to User's Guide of your phone for more.
To stop music, try stop playing
music from the phone then change
the audio mode to other than “MP3
Play” mode (e.g. FM, AM, CD, etc.)MEDIA