Door open HYUNDAI I20 2023 Owner's Guide
[x] Cancel search | Manufacturer: HYUNDAI, Model Year: 2023, Model line: I20, Model: HYUNDAI I20 2023Pages: 649, PDF Size: 12.35 MB
Page 320 of 649
6-47
06
Auto stop
OBC3060009
7 R V W R S W K H H Q J L Q H L Q L G O H V W R S P R G H
H [ F H S W 9 0 + ( 9
Manual Transmission/Intelligent
Manual Transmission
1. Decrease the vehicle speed to less
than 3 mph (5 km/h).
2. Shift into N (Neutral) position.
3. Release the clutch pedal.
Automatic Transmission/Dual Clutch
Transmission
1. Decrease the vehicle speed to 0 mph
(0 km/h).
2. Press the brake pedal.
The engine will stop and the green AUTO
STOP indicator (
) on the instrument
cluster will illuminate.
NOTICE
[ 9 H K L F O H Z K L F K L V H T X L S S H G Z L W K
manual transmission or intelligent
manual transmission must reach
a speed of at least 5 mph (8 km/h)
since last idle stop and vehicle
which is equipped with automatic
transmission or dual clutch
transmission must reach a speed of
at least 3 mph (5 km/h) since last idle
stop.
[ , I \ R X X Q I D V W H Q W K H V H D W E H O W R U R S H Q
the driver’s door (engine bonnet), ISG
system will be deactivated.
7 R V W R S W K H H Q J L Q H L Q L G O H V W R S P R G H
I R U 9 0 + ( 9
Manual Transmission/Intelligent
Manual Transmission
Three versions of idle stop are available
for MHEV which is equipped with
manual transmission or intelligent
manual transmission.
- Conventional Idle STOP
[ ' H F U H D V H W K H Y H K L F O H V S H H G W R O H V V
than 4 mph (7 km/h).
[ 6 K L I W L Q W R 1 1 H X W U D O S R V L W L R Q
[ 5 H O H D V H W K H F O X W F K S H G D O
- Extended Idle STOP
[ ' H S U H V V W K H E U D N H S H G D O
[ ' H S U H V V W K H F O X W F K S H G D O
- During Sailing Mode
You can keep engine off status from
sailing to standstill by pressing clutch
and brake pedal nearly at the same time.
NOTICE
1. If last gear position was the 1st, ISG
STOP will not be activated.
2. Vehicle which is equipped with
manual transmission or intelligent
manual transmission must reach
a speed of at least 5 mph (8 km/h)
since last idle stop.
3. During ISG STOP status, you can shift
into N(Neutral) position and release
clutch pedal, then ISG STOP status
will remain as STOP.
4. Extended Idle STOP operates even
over 4 mph (7km/h) if it meets the
speed requirement in each gear
position. (example: Extended Idle
STOP operates even at the 3rd speed,
24 mph (40km/h)).
5. If you unfasten the seat belt or open
the driver’s door (engine bonnet), ISG
system will be deactivated.
Page 321 of 649
6-48
Driving your vehicle
Automatic Transmission/Dual Clutch
Transmission
- Conventional Idle STOP
[ ' H F U H D V H W K H Y H K L F O H V S H H G W R P S K
(0 km/h).
[ 3 U H V V W K H E U D N H S H G D O
- Extended Idle STOP
[ ' H F U H D V H W K H Y H K L F O H V S H H G O H V V W K D Q
15 mph (25 km/h).
[ 3 U H V V W K H E U D N H S H G D O
- During Sailing Mode
You can keep engine off status from
sailing to standstill by pressing brake
pedal below 24 mph (40 km/h).
NOTICE
Vehicle which is equipped automatic
transmission or dual clutch
transmission must reach a speed of at
least 18 mph (30 km/h) for Extended
Idle STOP or 3 mph (5 km/h) for
Conventional Idle STOP since last idle
stop.
- If you unfasten the seat belt or open
the driver’s door (engine bonnet)
in auto stop mode at standstill, ISG
system will be deactivated.
Auto start
To restart the engine from idle stop
mode (except 48V MHEV)
Manual transmission vehicle/ Intelligent
Manual Transmission
Vehicle which is equipped with manual
transmission or intelligent manual
transmission is available two version of
restart.
- Conventional restart
Press the clutch pedal when the shift
lever is in the N (Neutral) position.
- Late restart (if equipped)
1. Depress the clutch pedal
2. Engage the gear
3. Release the brake pedal
NOTICE
1. Late restart function is only operated
when it is on a level ground and the
vehicle is stable.
2. To start the engine when the brake
pedal is not pressed or gear is already
engaged, press the brake pedal first
and press on the clutch pedal for
safety.
3. To turn on the engine without vehicle
movement with the brake pedal
pressed (only with Late Restart),
[ 3 U H V V D Q G U H O H D V H W K H F O X W F K S H G D O
[ 3 U H V V W K H F O X W F K S H G D O D J D L Q
immediately
4. After the engine stall, If you operate
as below the engine will start.
[ 5 H O H D V H W K H F O X W F K S H G D O D I W H U W K H
engine completely stop
[ ' H S U H V V W K H F O X W F K S H G D O
Page 406 of 649
Driver assistance system
7-60
OJX1070063R
After the vehicle stops, when an
approaching vehicle from the rear area is
detected as soon as a passenger opens
a door, Safe Exit Warning will warn the
driver with a warning message and
an audible warning to help prevent a
collision.
CAUTION
Warning timing may vary depending on
the speed of the approaching vehicle.
Detecting sensor
OBC3070018
[1] : Rear corner radar
The rear corner radars are sensors
located inside the rear bumper to detect
the side and rear areas. Always keep the
rear bumper clean for proper operation
of Safe Exit Warning.
NOTICE
For more details on the precautions of
the rear corner radars, refer to “Blind-
Spot Collision Warning (BCW)” or
“Blind-Spot Collision-Avoidance Assist
(BCA)” section in chapter 7.
6 $ ) ( ( ; , 7 : $ 5 1 , 1 *
Page 440 of 649
Driver assistance system
7-94
Collision Warning
OBC3070002
Whilst Smart Cruise Control is operating,
when the collision risk with the vehicle
D K H D G L V K L J K W K H S & R O O L V L R Q Z D U Q L Q JT
warning message will appear on the
cluster, and an audible warning will
sound to warn the driver. Always have
your eyes on the road whilst driving, and
if necessary, depress the brake pedal to
reduce your driving speed in order to
maintain a safe distance.
WARNING
In the following situations, Smart
Cruise Control may not warn the driver
of a collision.
- The distance from the front vehicle is
near, or the vehicle speed of the front
vehicle is faster or similar with your
vehicle
- The speed of the front vehicle is very
slow or is at a standstill
- The accelerator pedal is depressed
right after Smart Cruise Control is
turned on
WARNING
Take the following precautions when
using Smart Cruise Control:
[ Smart Cruise Control does not
substitute for proper and safe
driving. It is the responsibility of the
driver to always check the speed and
distance to the vehicle ahead.
[ Smart Cruise Control may not
recognise unexpected and sudden
situations or complex driving
situations, so always pay attention to
driving conditions and control your
vehicle speed.
[ Keep Smart Cruise Control off when
the function is not in use to avoid
inadvertently setting a speed.
[ Do not open the door or leave the
vehicle when Smart Cruise Control
is operating, even if the vehicle is
stopped.
[ Always be aware of the selected
speed and vehicle distance.
[ Keep a safe distance according to
road conditions and vehicle speed.
If the vehicle distance is too close
during high-speed driving, a serious
collision may result.
[ When maintaining distance with the
vehicle ahead, if the front vehicle
disappears, the function may
suddenly accelerate to the set speed.
Always be aware of unexpected and
sudden situations from occurring.
[ Vehicle speed may decrease on an
upward slope and increase on a
downward slope.
[ Always be aware of situations such as
when a vehicle cuts in suddenly.
[ When you are towing a trailer or
another vehicle, we recommend that
Smart Cruise Control is turned off
due to safety reasons.
[ Turn off Smart Cruise Control when
your vehicle is being towed.
Page 566 of 649
9-7
09
WARNING
Performing maintenance work on a
vehicle can be dangerous. If you lack
sufficient knowledge and experience
or the proper tools and equipment
to do the work, we recommend that
the system be serviced by a HYUNDAI
authorised repairer. ALWAYS follow
these precautions for performing
maintenance work:
[ 3 D U N \ R X U Y H K L F O H R Q O H Y H O J U R X Q G
move the shift lever into the P (Park,
for automatic transmission/dual
clutch transmission vehicle) position,
apply the parking brake, and place
the ignition switch in the LOCK/OFF
position.
[ % O R F N W K H W \ U H V I U R Q W D Q G E D F N W R
prevent the vehicle from moving.
Remove loose clothing or jewellery
that can become entangled in
moving parts.
[ , I \ R X P X V W U X Q W K H H Q J L Q H G X U L Q J
maintenance, do so out doors or in an
area with plenty of ventilation.
[ . H H S I O D P H V V S D U N V R U V P R N L Q J
materials away from the battery and
fuel-related parts.The following lists are vehicle checks
and inspections that should be
performed by the owner or a HYUNDAI
authorised repairer at the frequencies
indicated to help ensure safe,
dependable operation of your vehicle.
Any adverse conditions should be
brought to the attention of your dealer
as soon as possible.
These Owner Maintenance vehicle
checks are generally not covered by
warranties and you may be charged for
labour, parts and lubricants used.
Owner maintenance schedule
When you stop for fuel:
[ Check the coolant level in the engine
coolant reservoir.
[ Check the windscreen washer fluid
level.
[ Check for low or under-inflated tyres.
[ Check the radiator and condenser.
Check if the front of the radiator and
condenser are clean and not blocked
with leaves, dirt or insects, etc.
If any of the above parts are extremely
dirty or you are not sure of their
condition, we recommend that
you contact a HYUNDAI authorised
repairer.
WARNING
% H F D U H I X O Z K H Q F K H F N L Q J \ R X U H Q J L Q H
coolant level when the engine is hot.
This may result in coolant being blown
out of the opening and cause serious
burns and other injuries.
OWNER MAINTENANCE
Page 641 of 649
9-82
Maintenance
Finish damage repair
Deep scratches or stone chips in the
painted surface must be repaired
promptly. Exposed metal will quickly
rust and may develop into a major repair
expense.
NOTICE
If your vehicle is damaged and requires
any metal repair or replacement,
be sure the body shop applies anti-
corrosion materials to the parts
repaired or replaced.
NOTICE
Matte paint finish vehicle
(if equipped)
In case of matte paint finish vehicles,
it is impossible to modify only the
damaged area and repair of the whole
part is necessary. If the vehicle is
damaged and painting is required, we
recommend that you have your vehicle
maintained and repaired by a HYUNDAI
authorised repairer. Take extreme care,
as it is difficult to restore the quality
after the repair.
Bright-metal maintenance
[ 7 R U H P R Y H U R D G W D U D Q G L Q V H F W V X V H
a tar remover, not a scraper or other
sharp object.
[ 7 R S U R W H F W W K H V X U I D F H V R I E U L J K W P H W D O
parts from corrosion, apply a coating
of wax or chrome preservative and rub
to a high luster.
[ ' X U L Q J Z L Q W H U Z H D W K H U R U L Q F R D V W D O
areas, cover the bright metal parts
with a heavier coating of wax or
preservative. If necessary, coat the
parts with non-corrosive petroleum
jelly or other protective compound.
Underbody maintenance
Corrosive materials used for ice and
snow removal and dust control may
collect on the underbody. If these
materials are not removed, accelerated
rusting can occur on underbody parts
such as the fuel lines, frame, floor pan
and exhaust system, even though they
have been treated with rust protection.
Thoroughly flush the vehicle underbody
and wheel openings with lukewarm or
cold water once a month, after off-road
driving and at the end of each winter.
Pay special attention to these areas
because it is difficult to see all the mud
and dirt. It will do more harm than good
to wet down the road grime without
removing it. The lower edges of doors,
rocker panels, and frame members have
drain holes that should not be allowed
to clog with dirt; trapped water in these
areas can cause rusting.
Page 643 of 649
9-84
Maintenance
0 R L V W X U H E U H H G V F R U U R V L R Q
Moisture creates the conditions in
which corrosion is most likely to occur.
For example, corrosion is accelerated
by high humidity, particularly when
temperatures are just above freezing. In
such conditions, the corrosive material is
kept in contact with the vehicle surfaces
by moisture that is slow to evaporate.
Mud is particularly corrosive because
it is slow to dry and holds moisture in
contact with the vehicle. Although the
mud appears to be dry, it can still retain
moisture and promote corrosion.
High temperatures can also accelerate
corrosion of parts that are not properly
ventilated so the moisture can be
dispersed. For all these reasons, it is
particularly important to keep your
vehicle clean and free of mud or
accumulations of other materials. This
applies not only to the visible surfaces
but particularly to the underside of the
vehicle.
7 R K H O S S U H Y H Q W F R U U R V L R Q
You can help prevent corrosion from
getting started by observing the
following:
Keep your vehicle clean
The best way to prevent corrosion is
to keep your vehicle clean and free of
corrosive materials. Attention to the
underside of the vehicle is particularly
important.
[ If you live in a high-corrosion area —
where road salts are used, near the
ocean, areas with industrial pollution,
acid rain, etc.—, you should take extra
care to prevent corrosion. In winter,
hose off the underside of your vehicle
at least once a month and be sure to
clean the underside thoroughly when
winter is over.
[ When cleaning underneath the
vehicle, give particular attention to the
components under the fenders and
other areas that are hidden from view.
Do a thorough job; just dampening the
accumulated mud rather than washing
it away will accelerate corrosion rather
than prevent it. Water under high
pressure and steam are particularly
effective in removing accumulated
mud and corrosive materials.
[ When cleaning lower door panels,
rocker panels and frame members, be
sure that drain holes are kept open so
that moisture can escape and not be
trapped inside to accelerate corrosion.