heating Hyundai Ioniq Hybrid 2017 Quick Reference Guide

Quick Reference Guide I 25
24 I Quick Reference Guide
IONIQ HYBRID HYUNDAI
FEATURES AND CONTROLS
NOTE:
To reduce the tendency of the glass fogging and also to improve
visibility, keep the interior surface of the windshield clean by wiping it with
a clean cloth and glass cleaner. In addition, select air intake control to the
outside (fresh) air position whenever possible while operating the vehicle.
DEFOGGING
/ DEFROSTING3. Set the fan speed
to the highest
setting.2. Set the temperature
control to the
warmest setting.1. Press the front
windshield
defrost control
button.
DRIVER ONLY
If you press the DRIVER ONLY button, cold air mostly
blows in the direction of the driver’s seat.
AUTOMATIC HEATING / AIR CONDITIONING
2. Set the temperature
control to the desired
setting.
1. Press the AUTO
button.
Controls the modes, fan speeds, air intake and air-conditioning automatically.
SYSTEM OFF
Pressing the OFF button will place the system in the OFF mode.
• Blower will turn off.
• Outside (fresh) air position will be selected.
• Vented air will be at last set temperature.
SYNC BUTTON
Press the SYNC button to adjust the driver and
passenger side temperature and air flow direction
equally.
REAR WINDOW DEFROSTER
Press to activate/deactivate the rear window
defroster.
AIR INTAKE CONTROL
Outside (fresh) air
position
Recirculated
air positionChanges the direction of the air flow as follow.
MODE SELECTION
AUTOMATIC CLIMATE CONTROL
8 Air intake control button9 Fan speed control button10 Mode selection button11 Driver only button12 SYNC button13 Climate control information screen
1 Driver's temperature control knob2 Passenger's temperature control konb3 AUTO (automatic control) button4 OFF button5 Front windshield defrost button6 Rear window defrost button7 Air conditioning button
3
4
5
7
6
8
9
10
13
1
12
11
2

Quick Reference Guide I 29
28 I Quick Reference Guide
IONIQ HYBRID HYUNDAI
MULTIMEDIA
BLUETOOTH
® PHONE OPERATION
VOICE RECOGNITION TIPSYour vehicle is equipped with Voice Recognition technology which allows drivers to
operate their phones without having to take their eyes off the road to minimize
distractions.
Voice recognition performance may be affected if driving with windows
and sun roof open; when the heating-cooling system is on; when passing in
a tunnel or when driving on rugged and uneven roads.
Quick reference on using voice commands
To start voice command, press the
key, the following commands are
available:
Command FunctionCall Displays downloaded Contacts.
Call Calls saved in Contacts.
Dial Number Displays a screen where you can say a phone number to dial.
Dial You can directly say the number to call.
ex) Dial 111 555 1234
RedialDirectly calls at the number that you last dialed.
Call History Displays your Call History.
3. Confirm the 6-digit passkey
displayed on the audio
screen and the Bluetooth
device are identical. 1. Press the PHONE button in the head unit or CALL button in the
steering wheel remote control.
2. Search for the device name
as displayed on your mobile
phone and pair.
Phone setup (pairing phone) with Audio4. Press OK in your Bluetooth device.
5. Pairing is complete.NOTE:
Vehicle must be parked to complete pairing process.