radar HYUNDAI PALISADE 2022 Owner's Manual

5-105
Driving your vehicle
5
Blind-Spot Collision-
Avoidance Assist malfunction
and limitations
Blind-Spot Collision-AvoidanceAssist malfunction
When Blind-Spot Collision-
Avoidance Assist is not working
properly, the ‘Check Blind-Spot
Collision-Avoidance Assist’ warning
message will appear on the cluster,
and the function will turn off automat-
ically or the function will be limited.
Have the vehicle inspected by an
authorized HYUNDAI dealer. When the outside rearview mirror
warning light is not working properly,
the ‘Check side view mirror warning
light’ warning message will appear
on the cluster. Have the vehicle
inspected by an authorized
HYUNDAI dealer.
Blind-Spot Collision-Avoidance
Assist disabled
When the rear bumper around the
rear corner radar or sensor is cov-
ered with foreign material, such as
snow or rain, or installing a trailer or
carrier, it can reduce the detecting
performance and temporarily limit or
disable Blind-Spot Collision-
Avoidance Assist.
If this occurs, the ‘Blind-Spot Safety
system disabled. Radar blocked’
warning message will appear on the
cluster.
OTM070099N
OTM070098N
OTM070100N

5-106
Driving your vehicle
Blind-Spot Collision-Avoidance
Assist will operate normally when
such foreign material or trailer, etc. is
removed, and then the engine is
restarted.
If Blind-Spot Collision-Avoidance
Assist does not operate normally
after it is removed, have the vehicle
inspected by an authorized
HYUNDAI dealer.
Limitations of Blind-Spot Collision-Avoidance Assist
Blind-Spot Collision-Avoidance
Assist may not operate normally, or
the function may operate unexpect-
edly under the following circum-
stances:
There is inclement weather, such
as heavy snow, heavy rain, etc.
The rear corner radar is covered with snow, rain, dirt, etc.
The temperature around the rear corner radar is high or low
Driving on a highway (or motor- way) ramp
The road pavement (or the periph- eral ground) abnormally contains
metallic components (i.e. possibly
due to subway construction)
There is a fixed object near the vehicle, such as sound barriers,
guardrails, central dividers, entry
barriers, street lamps, signs, tun-
nels, walls, etc. (including double
structures)
Driving in large areas where there are few vehicles or structures (i.e.
desert, meadow, suburb, etc.)

Even though the warning
message does not appear on
the cluster, Blind-Spot Safety
system may not properly
operate.
Blind-Spot Collision-
Avoidance Assist may not
properly operate in an area
(e.g. open terrain) where any
substance are not detected
right after the engine is turned
on, or when the detecting sen-
sor is blocked with foreign
material right after the engine
is turned on.
WARNING
Turn off Blind-Spot Collision-
Avoidance Assist to install a
trailer, carrier, etc., or remove
the trailer, carrier, etc. to use
Blind-Spot Collision-Avoidance
Assist.
CAUTION

5-107
Driving your vehicle
5
Driving through a narrow roadwhere trees or grass are over-
grown
Driving on a wet road surface, such as a puddle on the road
The other vehicle drives very close behind your vehicle, or the other
vehicle passes by your vehicle in
close proximity
The speed of the other vehicle is very fast that it passes by your
vehicle in a short time
Your vehicle passes by the other vehicle
Your vehicle changes lane
Your vehicle has started at the same time as the vehicle next to
you and has accelerated
The vehicle in the next lane moves two lanes away from you, or when
the vehicle two lanes away moves
to the next lane from you
A trailer or carrier is installed around the rear corner radar The bumper around the rear cor-
ner radar is covered with objects,
such as a bumper sticker, bumper
guard, bike rack, etc.
The bumper around the rear cor- ner radar is impacted, damaged or
the radar is out of position
Your vehicle height is low or high due to heavy loads, abnormal tire
pressure, etc. Blind-Spot Safety system may not
operate normally, or the function may
operate unexpectedly when the fol-
lowing objects are detected:
A motorcycle or bicycle is detected
A vehicle such as a flat trailer is
detected
A big vehicle such as a bus or truck is detected
A moving obstacle such as a pedestrian, animal, shopping cart
or a baby stroller is detected
A vehicle with low height such as a sports car is detected
Braking control may not work, dri-
ver’s attention is required in the fol-
lowing circumstances:
The vehicle severely vibrates while driving over a bumpy road, uneven
road or concrete patch
Driving on a slippery surface due to snow, water puddle, ice, etc.
The tire pressure is low or a tire is damaged
The brake is reworked
The vehicle makes abrupt lane changes

5-110
Driving your vehicle
Information
This device complies with Part 15 of
the FCC rules.
Operation is subject to the following
three conditions:
1. This device may not cause harmfulinterference, and
2. This device must accept any inter- ference received, including interfer-
ence that may cause undesired
operation.
3. Changes or modifications not expressly approved by the party
responsible for compliance could
void the user's authority to operate
the device.
Information
Radio frequency radiation exposure
information:
This equipment complies with FCC
radiation exposure limits set forth for
an uncontrolled environment.
This equipment should be installed
and operated with minimum distance
of 8 in. (20 cm) between the radiator
(antenna) and your body.
This transmitter must not be co-locat-
ed or operating in conjunction with
any other antenna or transmitter.
ii
When you are towing a trailer
or another vehicle, make sure
that you turn off Blind-Spot
Safety system.
Blind-Spot Collision-
Avoidance Assist may not
operate normally if interfered
by strong electromagnetic
waves.
Blind-Spot Collision-
Avoidance Assist may not
operate for 15 seconds after
the vehicle is started, or the
front view camera or rear cor-
ner radars are initialized.
WARNING

5-111
Driving your vehicle
5
Rear Cross-Traffic Collision Warning
is designed to help detect vehicles
approaching from the left and right
side while your vehicle is reversing,
and warn the driver that a collision is
imminent with a warning message
and an audible warning.
[A] : Rear Cross-Traffic Collision Warning operating range
Information
In the following text, Rear Cross-
Traffic Collision Warning will be
referred as Rear Cross-Traffic Safety
system.
Detecting sensor
[1] : Rear corner radar
Refer to the picture above for the
detailed location of the detecting
sensor.
i
R RE EA A R R C C R R O O S SS S- -T T R R A A F FF FI IC C C C O O L LL LI IS S I IO O N N W W A AR RN N I IN N G G ( ( R R C CC CW W ) ) ( ( I IF F E E Q Q U UI IP P P PE ED D ) )
OJX1070108L
OLX2051139L
The time of warning may vary
depending on vehicle speed of
the approaching vehicle.
CAUTION
For more details on the precau-
tions of the rear corner radar,
refer to “Blind-Spot Collision-
Avoidance Warning (BCW)” sec-
tion in chapter 5.
CAUTION

5-115
Driving your vehicle
5
Rear Cross-Traffic Collision
Warning malfunction and limi-
tations
Rear Cross-Traffic CollisionWarning malfunction
When Rear Cross-Traffic Collision
Warning is not working properly, the
‘Check Rear Cross-Traffic Safety
system’ warning message will
appear on the cluster, and the func-
tion will turn off automatically, or the
function will be limited. Have the
vehicle inspected by an authorized
HYUNDAI dealer. When the outside rearview mirror
warning light is not working properly,
the ‘Check side view mirror warning
light’ (or ‘Check outside mirror warn-
ing icon’) warning message will
appear on the cluster. Have the vehi-
cle inspected by an authorized
HYUNDAI dealer.
Rear Cross-Traffic Collision
Warning disabled
When the rear bumper around the
rear corner radar or sensor is cov-
ered with foreign material, such as
snow or rain, or installing a trailer or
carrier, it can reduce the detecting
performance and temporarily limit or
disable Rear Cross-Traffic Collision
Warning.
If this occurs, the ‘Rear Cross-Traffic
Safety system disabled. Radar
blocked’ warning message will
appear on the cluster.
OTM070125N
OTM070100N
OTM070124N

5-116
Driving your vehicle
The function will operate normally
when such foreign material or trailer,
etc. is removed.
If the function does not operate nor-
mally after it is removed, have the
vehicle inspected by an authorized
HYUNDAI dealer.
Limitations of Rear Cross- Traffic Collision Warning
Rear Cross-Traffic Collision Warning
may not operate normally, or the
function may operate unexpectedly
under the following circumstances:
Departing from where trees or
grass are overgrown
Departing from where roads are wet
Speed of the approaching vehicle is fast or slow
Turn off Rear Cross-Traffic
Collision Warning to install a
trailer, carrier, etc., or remove
the trailer, carrier, etc. to use
Rear Cross-Traffic Collision
Warning.
CAUTION
For more details on the limita-
tions of the rear corner radar,
refer to “Blind-Spot Collision-
Avoidance Warning (BCW)” sec-
tion in chapter 5.
CAUTION
Even though the warning
message does not appear on
the cluster, Rear Cross-Traffic
Collision Warning may not
operate properly.
Rear Cross-Traffic Collision
Warning may not operate
properly in an area (for exam-
ple: open terrain), where any
substance are not detected
after turning ON the engine.
WARNING
Driving near a vehicle or
structure
[A] : Structure
Rear Cross-Traffic Collision
Warning may be limited when
driving near a vehicle or
structure, and may not detect
the vehicle approaching from
the left or right. If this occurs,
the function may not warn the
driver when necessary.
Always check your surround-
ings while backing up.
WARNING
OJX1079111

5-118
Driving your vehicle Pulling into the parking space
where there is a structure
[A] : Structure, [B] :Wall
Rear Cross-Traffic Collision
Warning may detect vehicles
passing by in front of you
when parking backwards into
a parking space with a wall or
structure in the rear or side
area. If this occurs, the func-
tion may unnecessarily warn
the driver.
Always check your surround-
ings while backing up.
OJX1079115
When the vehicle is parked
rearward
Rear Cross-Traffic Collision
Warning may detect vehicles
passing by behind you when
parking backwards into a
parking space. If this occurs,
the function may unnecessar-
ily warn the driver.
Always check your surround-
ings while backing up.
OJX1079116
Rear Cross-Traffic Collision
Warning may not operate nor-
mally if interfered by strong
electromagnetic waves.
Rear Cross-Traffic Collision
Warning may not operate for 3
seconds after the vehicle is
started, or the rear corner
radars are initialized.
WARNING

5-119
Driving your vehicle
5
Rear Cross-Traffic Collision-
Avoidance Assist is designed to help
detect vehicles approaching from the
left and right side while your vehicle
is reversing, and warn the driver that
a collision is imminent with a warning
message and an audible warning.
Also, braking is assisted to help pre-
vent collision.
[A] : Rear Cross-Traffic Collision Warning operatingrange,
[B] : Rear Cross-Traffic Collision-Avoidance Assist operating range
Detecting sensor
[1] : Rear corner radar
Refer to the picture above for the
detailed location of the detecting
sensors.
R RE EA A R R C C R R O O S SS S- -T T R R A A F FF FI IC C C C O O L LL LI IS S I IO O N N- -A A V VO O I ID D A A N N C CE E A A S SS SI IS S T T ( ( R R C CC CA A ) ) ( ( I IF F E E Q Q U UI IP P P PE ED D ) )
OJX1070108R
OLX2051139L
The time of warning may vary
depending on vehicle speed of
the approaching vehicle.
CAUTION
For more details on the precau-
tions of the rear corner radar,
refer to “Blind-Spot Collision-
Avoidance Assist (BCA)” sec-
tion in chapter 5.
CAUTION

5-126
Driving your vehicle
When the outside rearview mirror
warning light is not working properly,
the ‘Check side view mirror warning
light’ warning message will appear
on the cluster. Have the vehicle
inspected by an authorized
HYUNDAI dealer.
Rear Cross-Traffic Collision- Avoidance Assist disabled
When the rear bumper around the
rear-side radar or sensor is covered
with foreign material, such as snow
or rain, or installing a trailer or carri-
er, it can reduce the detecting per-
formance and temporarily limit or dis-
able Rear Cross-Traffic Collision-
Avoidance Assist.
If this occurs, the ‘Rear Cross-Traffic
Safety system disabled. Radar
blocked’ warning message will
appear on the cluster.
The system will operate normally
when such foreign material or trailer,
etc. is removed. If the function does not operate nor-
mally after it is removed, have the
vehicle inspected by an authorized
HYUNDAI dealer.
Even though the warning
message does not appear on
the cluster, Rear Cross-Traffic
Collision-Avoidance Assist
may not operate properly.
Rear Cross-Traffic Collision-
Avoidance Assist may not
operate properly in an area
(for example: open terrain),
where any substance are not
detected after turning ON the
engine.
WARNING
Turn off Rear Cross-Traffic
Collision-Avoidance Assist to
install a trailer, carrier, etc., or
remove the trailer, carrier, etc. to
use Rear Cross-Traffic
Collision-Avoidance Assist.
CAUTION
OTM070100N
OTM070124N