lock Hyundai Terracan 2005 User Guide
[x] Cancel search | Manufacturer: HYUNDAI, Model Year: 2005, Model line: Terracan, Model: Hyundai Terracan 2005Pages: 539, PDF Size: 18.03 MB
Page 32 of 539
1FEATURES OF YOUR HYUNDAI
18SEATS
!
B080A01A-AAT ADJUSTABLE FRONT SEATS
WARNING:
Never attempt to adjust the seat while the vehicle is moving. Thiscould result in loss of control or an accident which may cause death, serious injury, or property damage. B080B02A-AAT Adjusting Seat Forward and Rearward To move the seat toward the front or rear, pull the lock release lever up-ward. This will release the seat on its track so you can move it forward or rearward to the desired position. Whenyou find the position you want, release the lever and slide the seat forward or rearward on its track until it locks intothe desired position and cannot be moved further.
!WARNING:
1) Be careful that someone's head, hands and body are not trapped by a closing window.
2) Never try to operate the main
switch on the driver's door andthe individual door window switch in opposing directions atthe same time. If this is done, the window will stop and cannot be opened or closed.
3) Do not leave children alone in the car. Always remove the ignitionkey for their safety. HHP2026
Page 33 of 539
1
FEATURES OF YOUR HYUNDAI
19
!
!WARNING:
To ensure the seat is locked se- curely, attempt to move the seat forward or rearward without usingthe lock release lever. B080C01A-AAT Adjusting Seatback Angle To recline the seatback, lean forward to take your weight off it, then pull upon the recliner control lever at the outside edge of the seat. Now lean back until the desired seatback angleis achieved. To lock the seatback into position, release the recliner control lever.
WARNING:
To minimize risk of severe injury in the event of a collision or a sudden stop, both the driver and passen-ger seatbacks should always be in an upright position while the ve- hicle is in motion. The protectionprovided by the seat belts and airbags in a frontal collision may be reduced significantly when theseatbacks are reclined. There is greater risk that the driver and pas- senger will slide under the seat beltwhich may result in serious injury if a crash occurs when the seatbacks are reclined.The seat belt cannot provide full protection to an occupant if the seat back is reclined.
HHP2027 B080D02JM-GAT Adjustable Headrests
Lock knobB080D01HP
Headrests are designed to help re- duce the risk of neck injuries. To raise the headrest, pull it up. Tolower it, push it down while pressing the lock knob. To remove the head- rest, raise it as far as it can go thenpress the lock knob while pulling up- ward.
Page 35 of 539
1
FEATURES OF YOUR HYUNDAI
21
!
!
B090A02Y-AAT POWER DRIVER'S SEAT (If Installed) The driver's seat can be adjusted ap- propriately by using the control knobon the left side of the seat. Before driving, adjust the seat to the proper position so as to easily control thesteering wheel, pedals and switches on the instrument panel.
CAUTION:
Do not operate two knobs at the same time.
WARNING:
o Never attempt to adjust the seat while the vehicle is moving. Thiscould result in loss of control oran accident causing death, seri- ous injury, or property damage.
o Do not sit or lean unnecessarily close to the airbag. B090B01L-AAT Adjusting Seat Forward and Rearward Pull the control knob forward or back- ward to move the seat forward or back-ward to the desired position. Release the knob and the seat will lock at that position.
1. Reclining Control Knob
2. Sliding and Height Adjusting Con-
trol Knob
B080F01S-AAT Seat Cushion Height Adjustment (Driver's Seat Only) (If Installed) To raise or lower the front part of the seat cushion, turn the front knob for-ward or rearward. To raise or lower the rear part of the seat cushion, turn the rear knob forward or rearward.
HHP2028
HHP2029
1
2
Page 36 of 539
1FEATURES OF YOUR HYUNDAI
22
!
B090D01Y-AAT Adjusting Seatback Angle Rotate the upper portion of the control knob forward or backward to recline the seatback to the desired position.Release the control knob and then the seatback will lock in that position. WARNING:
To minimize the risk of personal injury in the event of a collision or a sudden stop, both the driver's and passenger's seatbacks shouldremain in an upright position while the car is in motion. The protection provided by the seat belts andairbags may be reduced signifi- cantly when the seatbacks are re- clined. There is a greater risk thatthe seat occupants will slide under the belt resulting in serious injury if a crash occurs when the seatbacksare reclined. The seat belt cannot provide full protection to an occu- pant if the seatback is reclined.
B090C01Y-AAT Seat Cushion Height Adjustment Move the front portion of the control knob up or down to raise or lower the front part of the seat cushion. Move therear portion of the control knob up or down to raise or lower the rear part of the seat cushion.
HHP2031
HHP2030
Page 38 of 539
1FEATURES OF YOUR HYUNDAI
24
!
B090A03HP-GAT SECOND SEAT Adjustable Headrests(If Installed) Headrests are designed to help re- duce the risk of neck injuries. To raise the headrest, pull it up. To lower it, push it down while pressingthe lock knob. To remove the headrest, raise it as far as it can go then press the lock knobwhile pulling upward. WARNING:
o For maximum effectiveness in case of an accident the headrest should be adjusted so the middle of the headrest is at the sameheight as the top of the occupant's eyes. For this rea- son, the use of a cushion thatholds the body away from the seatback should not be recom- mended.
o Do not operate vehicle with the
headrests removed as injury tothe occupants may occur in theevent of an accident. Headrestsmay provide protection against neck injuries when properly ad- justed.
o Do not adjust the headrest hejght while the vehicle is in motion.
Lock Knob B090C02HP-GAT Adjusting Seatback Angle To recline the seatback, push the seatback folding lever toward the head-rest, and release it after the desired seatback angle is achieved. When you recline the seatback to de-sired position, always be sure it has locked into position.
Seatbackfolding lever
B090A01HP HHP2039
Page 39 of 539
1
FEATURES OF YOUR HYUNDAI
25
B090B02HP-DAT Folding Rear Seatback and Seat Cushion For greater convenience, the entire seatback and seat cushion may befolded down and up.
!WARNING:
To minimize the risk of personal injury in the event of a collision ora sudden stop, both the driver's and passenger's seatbacks should remain in an upright position whilethe car is in motion. The protection provided by the seat belts and airbags may be reduced signifi-cantly when the seatbacks are re- clined. There is a greater risk that the seat occupants will slide underthe belt resulting in serious injury if a crash occurs when the seatbacks are reclined. The seat belt cannotprovide full protection to an occu- pant if the seatback is reclined. NOTE: Before folding the seat, fit the seat belt webbing in the clip and put the seat belt buckle between theseatback and the seat cushion.
1. Lower the headrest completely while
pressing the lock knob. (If Installed)
HHP2057 HHP2041 HHP2040
2. To fold down the seatback , first push and hold the seatback folding lever(1) inward, and then push down the seatback. (1)
Page 40 of 539
1FEATURES OF YOUR HYUNDAI
26
!WARNING:
When folding down or returning the seatback, always hold theseatback. Otherwise, the seatback could move suddenly and result in unexpected injury.
NOTE:
o Before lowering the seat cush-ion when you return the seat, roll the securing strap and put it in the pocket.
o When you return the seatback to its upright position, always besure it is locked into position bypulling and pushing on the top of seatback.
HHP2042
3. Pull the seat cushion release le- ver(2) upward, and then fold up theseat cushion. 4. To secure the seat, hook the secur-
ing strap(3) under the seat cushionto the headrest stay of front driver and passenger seat.
5. To return the seatback and seat cushion to its normal position, re-verse the above procedure. HHP2043
HHP2043-1
(2) (3)
Page 41 of 539
1
FEATURES OF YOUR HYUNDAI
27
!WARNING:
o The purpose of the fold-down rear seatback and the fold-up rear seat cushion is to allow you to carry more objects than could be accommodated. Never allow pas-sengers to sit on the cargo area while the car is moving. This is not a proper seating position andno seat belts are available for use when the seatback is folded down.This could result in serious in- jury or death in case of an acci- dent or a sudden stop. Objectsshould not extend higher than the top of the front seatbacks. This could allow cargo to slideforward and cause injury or dam- age during sudden stops. B095A03HP-GAT THIRD SEAT(For 7 Passengers) Adjusting Seatback Angle To recline the seatback, pull the seatback recliner control lever back-wards, and release it after the desired seatback angle is achieved. When you recline the seatback to de-sired position, always be sure it has locked into position.
o When you return the rear
seatback to its upright position after being folded down, be care- ful not to damage the seat belt webbing or buckle. In addition,do not allow the seat belt web- bing or buckle to get caught or pinched in the rear seat.
o Do not allow passengers to fold down and up the seatback andseat cushion while the car ismoving.
HHP2049
Page 42 of 539
1FEATURES OF YOUR HYUNDAI
28
!
3. Pull the seat cushion release knob(2)
beside the seat cushion, and fold the seat cushion sideways.
B095B04HP-GAT Folding Rear Seatback and Seat Cushion
1. Lower the headrest completely while
pressing the lock knob (If Installed).
2. To fold down the seatback, pull the seatback recliner control lever(1), and then push down the seatback.
WARNING:
To minimize the risk of personalinjury in the event of a collision or a sudden stop, both the driver's and passenger's seatbacks shouldremain in an upright position while the car is in motion. The protection provided by the seat belts andairbags may be reduced signifi- cantly when the seatbacks are re- clined. There is a greater risk thatthe seat occupants will slide under the belt resulting in serious injury if a crash occurs when the seatbacksare reclined. The seat belt cannot provide full protection to an occu- pant if the seatback is reclined.
!WARNING:
When folding down or returning the seatback, always hold the seatback. Otherwise, the seatback could move suddenly and result inunexpected injury. HHP2050
HHP2051
(1) (2)
Page 43 of 539
1
FEATURES OF YOUR HYUNDAI
29
!
4. To secure the seat, hook the secur-
ing strap(3) under the seat cushion to the assist handle and fold the leg of the third seat(4). 5. Fix the seat belt buckle in the groove
not to damage it.
6. To return the seatback and seat cushion to its normal position, re-verse the above procedure.
NOTE: When you return the seat cushion to its normal position, always lower the leg of the third seat to lock theseat into position.
WARNING:
o The purpose of the fold-down rear seatback and the fold-up rearseat cushion is to allow you tocarry more objects than could be accommodated. Never allow pas- sengers to sit on the cargo areawhile the car is moving. This is not a proper seating position and no seat belts are available for usewhen the seatback is folded down.
HHP2053
This could result in serious in- jury or death in case of an acci- dent or a sudden stop. Objectsshould not extend higher than the top of the front seatbacks. This could allow cargo to slideforward and cause injury or dam- age during sudden stops.
o When you return the rear
seatback to its upright positionafter being folded down, be care- ful not to damage the seat beltwebbing or buckle. In addition, do not allow the seat belt web- bing or buckle to get caught or pinched in the rear seat.
o Do not allow passengers to fold
down and up the seatback andseat cushion while the car is moving.
HHP2054
(3)
(4)