change language INFINITI EX 2013 Navigation Manual

Black plate (99,1)
[ Edit: 2012/ 11/ 8 Model: 08TJ-N ]
Enlarged intersection view
IRG0101When approaching a guide point, the
system automatically changes to the split
screen and shows an enlarged view of the
intersection on the left screen. After
passing through the intersection, the
system automatically returns to the full
screen mode. To switch to the full screen
mode while the enlarged intersection view
is displayed, push

Black plate (100,1)
[ Edit: 2012/ 11/ 8 Model: 08TJ-N ]
5. Route guidance
5-10
Split screen settings
The display setting on the left-hand side
screen shown during route guidance can
be changed.
IRG01041. Pushwhile the current location
map screen is displayed.
2. Highlight [Map View] and push
.
IRG01053.Highlight [View Settings] and push
. 4.
Highlight the preferred screen and
push . The indicator of the
selected screen illuminates.
Intersection:
IRG0101The map screen and the enlarged intersec-
tion view can be displayed at the same
time.
Push

Black plate (103,1)
[ Edit: 2012/ 11/ 8 Model: 08TJ-N ]
ROUTE SCREEN
WARNING!GUID-50E81198-C723-4F4C-BD17-4585ECC046CEAlways stop the vehicle in a safe location
before modifying the route conditions.
Modifying the route conditions while driving
may cause an accident.
During route guidance, the route condi-
tions can be modified and the route
information can be confirmed. Set route
conditions according to personal prefer-
ence.
IRG0117
BASIC OPERATION
1. Push.
2. Highlight the preferred setting item and push .
3. Push

Black plate (105,1)
[ Edit: 2012/ 11/ 8 Model: 08TJ-N ]
INFO:
If a new route is set, the canceled route cannot
be reactivated.
EDITING ROUTE
IRG01211. Push.
2. Highlight [Edit/Add to Route] and push .
3. Highlight the preferred condition and push .
4. Push to return to the previous
screen. Push

Black plate (106,1)
[ Edit: 2012/ 11/ 8 Model: 08TJ-N ]
5. Route guidance
5-16
IRG01231. Push.
2. Highlight [Edit/Add to Route] and push .
3. Highlight [Add Destination] or [Add
Waypoint] and push .
If [Add Destination] is selected, the
current destination changes to a way-
point.
IRG01244. Set a destination or waypoint. The
method of searching for a destination
or waypoint is the same as the one for a destination.
“4. Setting destination”
IRG01255. The selected location is displayed at
the center of the map. Highlight [Add to
Route] after confirming the location and
push .
INFO:
Even after setting a destination/waypoint,
the destination/waypoint location can be
adjusted, the route can be stored, etc.
“Editing/deleting destination or way-
point” (page 5-17)
IRG01266. Return to the [Edit Route] screen. Set
the route conditions as necessary.
7. Highlight [Calculate] and push .
The system will recalculate the routes.
After the route search is completed, the
display will automatically return to the
current location map screen.
INFO:
.
The prior route is automatically deleted.
.Added waypoints and search conditions will
not be taken into consideration for the route
calculation until [Calculate] is highlighted
and is pushed.
Condition: Language=NAM_English/

Black plate (108,1)
[ Edit: 2012/ 11/ 8 Model: 08TJ-N ]
5. Route guidance
5-18
INFO:
.
If the destination is deleted, the final
waypoint of the route becomes the destina-
tion.
.Even if the map screen is touched, the same
map screen as when [Move Dest.] is
selected is displayed.
Changing order of destination and
waypoints
The order of a destination and waypoints
that have already been set can be changed.
IRG01321. Push .
2. Highlight [Edit/Add to Route] and push .
3. Highlight a destination or waypoint that is already set and push .
IRG01334.Highlight [Change Order] and push
. A list of the destination and
waypoints is displayed.
IRG01345.Highlight a preferred destination or
waypoint to replace the previously
selected destination or waypoint and
push .
IRG01356. A message is displayed and the order
of the destination or waypoint is
changed.
IRG01367. By highlighting [Calculate] and pushing, the system will recalculate the
routes. After the route search is com-
plete, the display will automatically
return to the current location map
screen.
Condition: Language=NAM_English/

Black plate (109,1)
[ Edit: 2012/ 11/ 8 Model: 08TJ-N ]
Changing route calculation condi-
tions
Each section of the route between way-
points can have different route calculation
conditions. After setting these conditions,
the entire route can be recalculated.
IRG01371. Push.
2. Highlight [Edit/Add to Route] and push .
3. Highlight the preferred section of the route to the destination or waypoint
and push .
IRG01384. Highlight the preferred condition and
push .
Available conditions
: [Fastest Route]
: [Minimize Freeway]
: [Shortest Route]
IRG01395. The conditions have been changed and the display returns to the [Edit Route]
screen.
IRG01406. By highlighting [Calculate] and pushing, the system will recalculate the
routes. After the route search is com-
pleted, the display will automatically
return to the current location map
screen.
INFO:
.
The recalculated route may not be the
shortest route because the system priori-
tizes roads that are easy to drive for safety
reasons.
.If the route conditions are set from [Route
Settings], all sections in the route are
subject to the same route conditions. This
applies even if different route conditions
have been set for different sections in [Edit
Route].
5. Route guidance
5-19
Condition: Language=NAM_English/

Black plate (111,1)
[ Edit: 2012/ 11/ 8 Model: 08TJ-N ]
3. Push

Black plate (114,1)
[ Edit: 2012/ 11/ 8 Model: 08TJ-N ]
5. Route guidance
5-24
.If the system cannot calculate a detour with
the specified conditions, it displays the
previous suggested route.
.If the vehicle is traveling very fast, the
detour route may start from a location that
the vehicle has already passed.
SEARCHING FOR DETOUR ROUTE
TAKING TRAFFIC INFORMATION INTO
CONSIDERATION
When a serious traffic event occurs on the
route, or if the system finds a faster route,
a detour alert will pop up automatically. If
the automatic alert is not noticed, a detour
can also be manually searched.
1. Push.
IRG01562.Highlight [Traffic Detour] and push
.
IRG01573. When the detour search is successful,
detailed information about the detour
route (left screen) and the comparison
screen of the two routes (right screen)
are displayed.
*1Original route (yellow)
*2Detour route (pink)
*3The change of distance and esti-
mated travel time to destination
when the detour route is taken.
4. To accept the suggested detour route, highlight [Yes], and then push .
INFO:
.
If no route is set, or [Use Real Time Traffic
Information] is turned off, this function
cannot be operated.
.If a detour route is not selected and no
further action is performed, the detour route
will be automatically canceled.
.The detour suggestion can be retrieved even
after the message disappears by manually
selecting [Traffic Detour]. The system will
then search for the detour again and
suggests a detour if one is available at that
time.
.Without a subscription to a NavTraffic
broadcast, it will not be possible to get a
traffic detour or apply settings for functions
related to traffic information. A message
appears when a related menu item is
selected.
“Notes on NavTraffic information”
(page 10-14)
Automatic detour guidance
When [Auto Reroute] and [Use Real Time
Traffic Information] are turned on in the
detailed route settings, a message will
automatically pop up when the system
finds a detour.
“Detailed route settings” (page 5-26)
Condition: Language=NAM_English/

Black plate (115,1)
[ Edit: 2012/ 11/ 8 Model: 08TJ-N ]
IRG01581.If a traffic jam or a serious traffic
problem occurs on the route while
driving along the suggested route, the
automatic detour route search starts
and a message pops up if a detour is
found.
2. To accept the suggested detour route, highlight [Yes] and push .
INFO:
.
If no operation is performed for one minute
after the message is displayed, the message
disappears. The detour will not be accepted,
and the current suggested route will remain
unchanged.
.When [Traffic Announcement] is turned on in
the guidance settings, the system will
announce voice guidance at the same time
that the message appears on the screen.
“Guidance settings” (page 5-21)
SETTING CONDITIONS FOR ROUTE
CALCULATION
Search condition settings
The route can be recalculated after chan-
ging the route calculation conditions any-
where along the route.
IRG0159Basic operation:
1. Push.
2. Highlight [Route Settings] and push
.
3. Highlight [Basic Route Type] and push .
4. Highlight the preferred condition and push . The indicator for the
selected condition illuminates. 5.
When the conditions are set, the
system starts calculating the route with
the new conditions, and the current
location map screen is displayed.
Available conditions . [Fastest Route]:
Prioritizes by the fastest time.
. [Minimize Freeway]:
Minimizes the use of motorways.
. [Shortest Route]:
Prioritizes by the shortest route.
INFO:
Only one of these conditions can be utilized at a
time.
Voice command
1. Push >located on the steering
wheel.
2. After the tone sounds, speak a com- mand.
To set conditions for the route calcula-
tion (Alternate Command Mode):
“Fastest Route”
“Minimize Freeway Route”
5. Route guidance
5-25
Condition: Language=NAM_English/