lock INFINITI G37 2012 Service Manual

Black plate (130,1)
[ Edit: 2012/ 1/ 17 Model: V36-D ]2-52 Instruments and controls GUID-EC46BDB9-5A5F-4FC9-A9F0-5555C039C450
POWER WINDOWS GUID-B5DC4A3B-BDA9-404F-9E56-B523D30545FC
WARNING. Make sure that all passengers have their
hands, etc. inside the vehicle while it is
in motion and before closing the win-
dows. Use the window lock switch to
prevent unexpected use of the power
windows.
. Do not leave children unattended inside
the vehicle. They could unknowingly
activate switches or controls and be-
come trapped in the window. Unat-
tended children could become involved
in serious accidents.
The power windows operate when the
ignition switch is in the ON position or for
about 45 seconds after the ignition switch
is pushed to the OFF position. If the
driver ’ s or front passenger ’ s door is
opened during this period of about 45
seconds, power to the windows is can-
celed. SIC3279
Sedan
SIC3286A
Coupe 1. Driver side window
2. Front passenger side window
3. Rear left passenger side window
(Sedan only)
4. Rear right passenger side window
(Sedan only)
5. Window lock button
Main power window switch (driver ’ s
side) GUID-30535306-1466-4E47-9742-71642DD2CE80
To open or close the window, push down
* A
or pull up
* B
the switch and hold it.
The main switch (driver side switches) will
open or close all the windows.
Locking passengers ’ windows GUID-AF236370-F01C-4CB7-B27B-2400A5A7941F
When the lock button
* C
is pushed in, only
the driver side window can be opened or
closed. Push it in again to cancel.WINDOWS

Black plate (135,1)
[ Edit: 2012/ 1/ 17 Model: V36-D ]SIC3250
PERSONAL LIGHTS (Sedan) GUID-8A80AFCB-87B7-47AE-B03E-E39C7E1A6A4A
Rear GUID-CB368416-2E25-494C-922F-2408158FB064
Push the button as illustrated to turn the
light on or off. SIC3251
INTERIOR LIGHT CONTROL SWITCH GUID-C2DB58AC-6BD5-4108-8834-2A62D1E0B377
The interior light control switch has three
positions: ON, DOOR and OFF.
ON position GUID-798EF023-2D8A-44E2-8CE2-F22177A6EBE9
When the switch is in the ON position
* 1
the map lights and rear personal lights will
illuminate.
DOOR position GUID-CA87C080-730F-4193-BE23-19559113F670
When the switch is in the DOOR position
* 2
, the map lights and rear personal lights
will illuminate under the following condi-
tions: . ignition switch is switched to the LOCK
position
— remain on for about 15 seconds.
. doors are unlocked by pushing the
UNLOCK button on the Intelligent Key
or door handle request switch with the
ignition switch in the LOCK position
— remain on for about 15 seconds.
. any door is opened and then closed
with the ignition switch in the LOCK
position
— remain on for about 15 seconds.
. any door is opened with the ignition
switch in the ACC or ON position
— remain on while the door is opened.
When the door is closed, the lights
go off.
The lights will also turn off after 15
minutes when the lights remain illumi-
nated after the ignition switch has been
pushed to the OFF or LOCK position to
prevent the battery from becoming dis-
charged.
When the auto interior illumination is set
to the OFF position (see “ Vehicle informa-
tion and settings ” (P.4-9)), the lights will
illuminate under the following condition:
Instruments and controls
2-57

Black plate (137,1)
[ Edit: 2012/ 1/ 17 Model: V36-D ]GUID-3B0103FD-8C82-48ED-ABBE-0FF7FE9A8F16
The light illuminates when the trunk lid is
opened. When the trunk lid is closed, the
light will turn off.
The light will also turn off after 15 minutes
when the light remains illuminated after
the ignition switch has been pushed to the
OFF or LOCK position to prevent the
battery from becoming discharged. GUID-0BF67760-C562-4D9A-8217-C1A104712017
HomeLink ®
Universal Transceiver provides
a convenient way to consolidate the func-
tions of up to three individual hand-held
transmitters into one built-in device.
HomeLink ®
Universal Transceiver:
. Will operate most Radio Frequency (RF)
devices such as garage doors, gates,
home and office lighting, entry door
locks and security systems.
. Is powered by your vehicle ’ s battery. No
separate batteries are required. If the
vehicle ’ s battery is discharged or is
disconnected, HomeLink ®
will retain all
programming.
Once HomeLink ®
Universal Transceiver is
programmed, retain the original transmit-
ter for future programming procedures
(Example: new vehicle purchases). Upon
sale of the vehicle, the programmed
HomeLink ®
Universal Transceiver buttons
should be erased for security purposes.
For additional information, see “ Program-
ming HomeLink ®
” (P.2-60).
WARNING . Do not use HomeLink ®
Universal Trans-
ceiver with any garage door opener that
lacks safety stop and reverse features as required by federal safety standards.
(These standards became effective for
opener models manufactured after April
1, 1982.) A garage door opener which
cannot detect an object in the path of a
closing garage door and then automati-
cally stop and reverse, does not meet
current federal safety standards. Using a
garage door opener without these fea-
tures increases the risk of serious injury
or death.
. During programming procedure, your
garage door or security gate may open
or close. Make sure that people and
objects are clear of the garage door,
gate, etc. that you are programming.
. Your vehicle ’ s engine should be turned
off while programming HomeLink ®
Uni-
versal Transceiver.
Instruments and controls
2-59TRUNK LIGHT HomeLink ®
UNIVERSAL TRANSCEIVER (if so
equipped)

Black plate (143,1)
[ Edit: 2012/ 1/ 17 Model: V36-D ]3 Pre-driving checks and adjustments Keys ....................................................................... 3-2
Intelligent Key .................................................... 3-2
Valet hand-off ..................................................... 3-3
Doors ..................................................................... 3-4
Locking with mechanical key .............................. 3-4
Opening and closing windows with the
mechanical key ................................................... 3-5
Locking with inside lock knob ............................ 3-5
Locking with power door lock switch .................. 3-5
Automatic door locks .......................................... 3-6
Child safety rear door lock (Sedan) ..................... 3-6
Intelligent Key system ............................................ 3-7
Intelligent Key operating range .......................... 3-8
Door locks/unlocks precaution .......................... 3-9
Intelligent Key operation .................................. 3-10
Battery saver system ........................................ 3-12
Warning signals ................................................ 3-12
Troubleshooting guide ...................................... 3-13
Remote keyless entry system ................................ 3-14
How to use remote keyless entry system .......... 3-14
Hood .................................................................... 3-18
Trunk lid ............................................................... 3-18
Trunk lid release switch .................................... 3-19 Trunk open request switch .............................. 3-19
Trunk release power cancel switch .................. 3-20
Interior trunk lid release ................................. 3-21
Unique front and rear parts (INFINITI Performance
Line, Aerodynamic Package models) ..................... 3-21
Fuel-filler door ...................................................... 3-23
Opening the fuel-filler door ............................. 3-23
Fuel-filler cap .................................................. 3-23
Tilt/telescopic steering ......................................... 3-26
Manual operation (if so equipped) .................. 3-26
Electric operation (if so equipped) .................. 3-26
Sun visors ............................................................ 3-27
Mirrors ................................................................ 3-28
Inside mirror ................................................... 3-28
Outside mirrors ............................................... 3-29
Vanity mirror ................................................... 3-31
Automatic drive positioner (if so equipped) .......... 3-31
Entry/exit function (Automatic Transmission
Sedan models) ................................................ 3-31
Seat synchronization function ........................ 3-32
Memory storage .............................................. 3-33
System operation ............................................ 3-34

Black plate (145,1)
[ Edit: 2012/ 1/ 17 Model: V36-D ]— Do not place the Intelligent Key for
an extended period in a place where
temperatures exceed 140 8 F (60 8 C).
— Do not change or modify the In-
telligent Key.
— Do not use a magnet key holder.
— Do not place the Intelligent Key near
an electric appliance such as a
television set or personal computer.
— Do not allow the Intelligent Key to
come into contact with water or salt
water, and do not wash it in a
washing machine. This could affect
the system function.
. If an Intelligent Key is lost or stolen,
INFINITI recommends erasing the ID code
of that Intelligent Key. This will prevent
the Intelligent Key from unauthorized
use to unlock the vehicle. For informa-
tion regarding the erasing procedure,
please contact an INFINITI retailer. SPA2033
Mechanical key GUID-7F1D714A-88A5-4B94-8BFC-A9616BB16BE6
To remove the mechanical key, release the
lock knob at the back of the Intelligent Key.
To install the mechanical key, firmly insert
it into the Intelligent Key until the lock
knob returns to the lock position.
Use the mechanical key to lock or unlock
the doors, glove box and trunk pass-
through lid, if they are equipped with a
key cylinder.
See “ Doors ” (P.3-4) and “ Trunk lid ” (P.3-
18), “ Storage ” (P.2-45) and “ Seats ” (P.1-2). CAUTION Always carry the mechanical key installed in
the key.
VALET HAND-OFF GUID-126EF626-8897-4A52-861A-A1BD0D40BF46
When you have to leave a key with a valet,
give them the Intelligent Key itself and
keep the mechanical key with you to
protect your belongings.
To prevent the glove box and the trunk
from being opened during valet hand-off,
follow the procedures below.
1. Push the trunk release power cancel
switch to the CANCEL side.
2. Remove the mechanical key from the
Intelligent Key.
3. Lock the glove box and the trunk pass-
through (for Sedan) with the mechan-
ical key.
4. Hand the Intelligent Key to the valet,
keeping the mechanical key in your
pocket or bag for insertion into the
Intelligent Key when you retrieve your
vehicle.
See “ Trunk lid ” (P.3-18), “ Storage ” (P.2-45)
Pre-driving checks and adjustments
3-3

Black plate (146,1)
[ Edit: 2012/ 1/ 17 Model: V36-D ]3-4 Pre-driving checks and adjustmentsand “ Seats ” (P.1-2). GUID-CB09A4B1-D08E-43B9-9C2F-BFA68FF9F858
WARNING . Always have the doors locked while
driving. Along with the use of seat belts,
this provides greater safety in the event
of an accident by helping to prevent
persons from being thrown from the
vehicle. This also helps keep children
and others from unintentionally opening
the doors, and will help keep out
intruders.
. Before opening any door, always look for
and avoid oncoming traffic.
. Do not leave children unattended inside
the vehicle. They could unknowingly
activate switches or controls. Unat-
tended children could become involved
in serious accidents. SPA2527
LOCKING WITH MECHANICAL KEY GUID-FD0E2748-0AAA-4DDE-852C-19A9E0264D0B
The power door lock system allows you to
lock or unlock all doors simultaneously
using the mechanical key.
. Turning the driver ’ s door key cylinder to
the front of the vehicle
* 1
will lock all
doors.
. Turning the driver ’ s door key cylinder
once to the rear of the vehicle
* 2
will
unlock the driver ’ s door. After returning
the key to the neutral position
* 3
,
turning it to the rear again within 60
seconds will unlock all doors.DOORS

Black plate (147,1)
[ Edit: 2012/ 1/ 17 Model: V36-D ]. You can switch the lock system to the
mode that allows you to open all the
doors when the key is turned once.
(See “ How to use SETTING button ” (P.4-
14).)
OPENING AND CLOSING WINDOWS
WITH THE MECHANICAL KEY GUID-BDF25113-B0DB-4A09-B3CD-8E91F3E90385
The driver ’ s door key operation also allows
you to open and close the window that is
equipped with the automatic open/close
function. (See “ Power windows ” (P.2-52)).
To open the window, turn the driver ’ s door
key cylinder to the rear of the vehicle for
longer than 1 second . The door is unlocked
and the window keeps opening while
turning the key.
This function can also be performed by
pushing and holding the door UNLOCK
button of the Intelligent Key. (See “ Remote
keyless entry system ” (P.3-14).)
To close the window, turn the driver ’ s door
key cylinder to the front of the vehicle for
longer than 1 second . The door is locked
and the window keeps closing while turn-
ing the key. SPA1814
LOCKING WITH INSIDE LOCK KNOB GUID-A9282195-68F1-4CF5-AF88-B68E8AEC2AB5
To lock the door individually, move the
inside lock knob to the lock position
* 1
then close the door.
To unlock, move the inside lock knob to the
unlock position
* 2
.
When locking the door without an Intelli-
gent Key, be sure not to leave the
Intelligent Key inside the vehicle. SPA2300
LOCKING WITH POWER DOOR LOCK
SWITCH GUID-F5E2CE5C-C694-4102-AE6F-02ECD9FA4615
Operating the power door lock switch will
lock or unlock all the doors. The switches
are located on the driver ’ s and front
passenger ’ s door armrests.
To lock the doors, push the power door
lock switch to the lock position
* 1
with the
driver ’ s or front passenger ’ s door open,
then close the door.
When locking the door this way, be certain
not to leave the Intelligent Key inside the
vehicle.
To unlock the doors including the fuel-filler
Pre-driving checks and adjustments
3-5

Black plate (148,1)
[ Edit: 2012/ 1/ 17 Model: V36-D ]3-6 Pre-driving checks and adjustmentsdoor, push the power door lock switch to
the unlock position
* 2
.
Lockout protection GUID-F17FC232-6651-4027-B680-5A82DB2977B3
When the power door lock switch (driver or
front passenger) is moved to the lock
position with the Intelligent Key in the port
and any door open, all doors will lock and
unlock automatically. With the Intelligent
Key left in the vehicle (not in the Intelligent
Key port) and any door open, all doors will
unlock automatically and a chime will
sound after the door is closed.
These functions help to prevent the In-
telligent Key from being accidentally
locked inside the vehicle.
AUTOMATIC DOOR LOCKS GUID-A10FB110-3B3F-40BA-97F3-3C215C27FFEF
. All doors lock automatically when the
vehicle speed reaches 15 MPH (24
km/h).
. All doors unlock automatically when the
ignition switch is placed in the OFF
position.
The automatic unlock function can be
deactivated or activated. To deactivate or
activate the automatic door unlock system,
perform the following procedure: 1. Close all doors.
2. Place the ignition switch in the ON
position.
3. Within 20 seconds of performing Step
2, push and hold the power door lock
switch to the
position (UNLOCK) for
more than 5 seconds.
4. When activated, the hazard indicator
will flash twice. When deactivated, the
hazard indicator will flash once.
5. The ignition switch must be placed in
the OFF and ON position again between
each setting change.
When the automatic door unlock system is
deactivated, the doors do not unlock when
the ignition switch is placed in the OFF
position. To unlock the door manually, use
the inside lock knob or the power door lock
switch (driver ’ s or front passenger ’ s side). SPA2470
CHILD SAFETY REAR DOOR LOCK
(Sedan) GUID-DE27EA42-B974-4087-AC65-39A603A3ECDA
The child safety rear door lock helps
prevent doors from being opened acciden-
tally, especially when small children are in
the vehicle.
When the levers are in the lock position
* 1
, the rear doors can be opened only
from the outside.
To disengage, move the levers to the
unlock position
* 2
.

Black plate (151,1)
[ Edit: 2012/ 1/ 17 Model: V36-D ]When the Intelligent Key battery is dis-
charged or strong radio waves are present
near the operating location, the Intelligent
Key system ’ s operating range becomes
narrower, and the Intelligent Key may not
function properly.
The operating range is within 31.50 in (80
cm) from each request switch
* 1
.
If the Intelligent Key is too close to the door
glass, handle or rear bumper the request
switches may not function.
When the Intelligent Key is within the
operating range, it is possible for anyone
who does not carry the Intelligent Key to
push the request switch to lock/unlock the
doors and open the trunk lid. SPA2407
DOOR LOCKS/UNLOCKS PRECAU-
TION GUID-8758F957-0253-4213-B30B-91C164A3E031
. Do not push the door handle request
switch with the Intelligent Key held in
your hand as illustrated. The close
distance to the door handle will cause
the Intelligent Key system to have
difficulty recognizing that the Intelli-
gent Key is outside the vehicle.
. After locking with the door handle
request switch, verify the doors are
securely locked by testing them.
. To prevent the Intelligent Key from
being left inside the vehicle or the trunk, make sure you carry the key with
you and then lock the doors or the
trunk.
. Do not pull the door handle before
pushing the door handle request
switch. The door will be unlocked but
will not open. Release the door handle
once and pull it again to open the door.
. The Intelligent Key system (opening/
closing doors with the door handle
request switch) can be set to remain
inactive. (See “ Vehicle information and
settings ” (P.4-9).)
Pre-driving checks and adjustments
3-9

Black plate (152,1)
[ Edit: 2012/ 1/ 17 Model: V36-D ]3-10 Pre-driving checks and adjustments SPA2724
INTELLIGENT KEY OPERATION GUID-3067F87E-1F6D-40FB-85EF-BCAC29D5C466
You can lock or unlock the doors without
taking the key out from your pocket or bag. SPA2725
When you carry the Intelligent Key with
you, you can lock or unlock all doors by
pushing the door handle request switch
(driver ’ s or front passenger ’ s)
* A
within
the range of operation.
When you lock or unlock the doors or the
trunk lid, the hazard indicator will flash
and the horn (or the outside chime) will
sound as a confirmation. For details, see
“ Setting hazard indicator and horn mode ”
(P.3-16).
Locking doors and fuel-filler door GUID-63A62F2A-B46B-430A-A607-E006161B0ABE
1. Push the ignition switch to the OFF
position and make sure you carry the Intelligent Key with you.*1
2. Close all the doors.*2
3. Push the door handle request switch
(driver ’ s or front passenger ’ s)
* A
while
carrying the Intelligent Key with you.*3
4. All the doors and fuel-filler door will
lock.
5. The hazard indicator flashes twice and
the outside chime sounds twice.
*1: Doors will lock with the Intelligent Key
while the ignition switch is in the ACC or
ON position.
*2: Doors will not lock with the Intelligent
Key while any door is open.
*3: Doors will not lock by pushing the door
handle request switch with the Intelligent
Key inside the vehicle. However, when an
Intelligent Key is inside the vehicle, doors
can be locked with another registered
Intelligent Key.
CAUTION . After locking the doors using the request
switch, make sure that the doors have
been securely locked by operating the
door handles.