light INFINITI G37 2012 Manual Online

Black plate (176,1)
[ Edit: 2012/ 1/ 17 Model: V36-D ]3-34 Pre-driving checks and adjustmentsapproximately 0.5 second. When the
memory has stored in position, the
indicator light will stay on for approxi-
mately 5 seconds.
. If the battery cable is disconnected, or if
the fuse opens, the memory will be
canceled. In this case, reset the desired
position using the previous procedure.
. If optional Intelligent Keys are added to
your vehicle, the memory storage pro-
cedure to switch 1 or 2 and linking
Intelligent Key procedure to a stored
memory position should be performed
again for each Intelligent Key. For
additional Intelligent Key information,
see “ Keys ” (P.3-2).
Selecting the memorized position GUID-739A81F0-8862-49C2-BBA8-117F41F648F9
1. Automatic transmission models:
Move the selector lever to the P (Park)
position.
Manual transmission models:
Apply the parking brake.
2. Raise the seatback (Coupe).
3. Use one of the following methods to
move the driver ’ s seat, the outside
mirrors and the steering wheel. .
Push the ignition switch to the ON
position and push the memory
switch (1 or 2) fully for at least 1
second. .
Within 45 seconds of opening the
driver ’ s door, push the memory
switch (1 or 2) fully for at least 1
second.
The driver ’ s seat, steering column
and outside mirrors will move to the
memorized position with the indica-
tor light flashing, and then the light
will stay on for approximately 5
seconds.
For manual transmission models, the
memory positions can be selected even
when the engine is running. In this case,
move the shift lever to the N (Neutral)
position and apply the parking brake.
Then, perform step 2.
SYSTEM OPERATION GUID-0383C8BF-12F8-48D0-9B28-5A2A0DCC8D55
The automatic drive positioner system will
not work or will stop operating under the
following conditions:
. When the vehicle speed is above 4 MPH
(7 km/h).
. When the adjusting switch for the
driver ’ s seat and steering column is
turned on while the automatic drive positioner is operating.
. When the memory switch 1 or 2 is not
pushed for at least 1 second.
. When the seat, steering column and
outside mirrors have already been
moved to the memorized position.
. When no position is stored in the
memory switch.
. When the parking brake is released (MT
models).
. When the speed is above 4 MPH (7
km/h) while the parking brake is
applied (MT models).
To restart the drive positioner system,
move the parking brake to off and on.
. When the engine is started while
moving the automatic drive positioner.
. When the AT selector lever is moved
from the P (Park) position to any other
position. (However, it will not be
canceled if the switch is pushed while
the seat and steering column are
returning to the previous positions
(entry/exit function).)
. When the driver ’ s door remains open
for more than 45 seconds and the
ignition switch is not in the ON posi-
tion.

Black plate (185,1)
[ Edit: 2012/ 1/ 17 Model: V36-D ]. Delete:
Deletes the last character that has been
input with one touch. Push and hold to
delete all of the characters.
. OK:
Completes character inputs.
Touch screen maintenance GUID-E3D8C2B3-B87F-4DBB-8AF4-655EF548D2BC
If you clean the display screen, use a dry,
soft cloth. If additional cleaning is neces-
sary, use a small amount of neutral
detergent with a soft cloth. Never spray
the screen with water or detergent. Dam-
pen the cloth first, and then wipe the
screen. SAA1525
MENU OPTIONS (models with navi-
gation system) GUID-4E5C1330-69EB-4862-A681-1F1045FB93F1
The start menu can be displayed using the
menu control switch on the steering-wheel-
mounted controls.
1. While the MAP or STATUS screen is
displayed, push and hold the menu
control switch until the “ Menu Options ”
screen appears.
2. Highlight the preferred item by tilting
the menu control switch up or down,
and then push the menu control switch
to select it. SAA2476
Available items GUID-924ADD2F-5CCF-4D9C-BA75-D6B9E03DFA00
Destination/Route: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
These items are for the navigation system.
See the separate Navigation System Own-
er ’ s Manual for details.
Info: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
Displays the information screen. It is the
same screen that appears when you push
the INFO button.
Settings: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
Displays the settings screen. It is the same
screen that appears when you push the
SETTING button.
Monitor, climate, audio, phone and voice recognition systems
4-7

Black plate (186,1)
[ Edit: 2012/ 1/ 17 Model: V36-D ]4-8 Monitor, climate, audio, phone and voice recognition systems SAA2477
Models with navigation system
SAA1510
Models without navigation system HOW TO SELECT MENUS ON THE
SCREEN GUID-7F980AEB-984A-4A26-A3B2-C2F82F17CC7C
Vehicle functions are viewed on the display
screen in menus. To select each key item,
highlight the preferred item using the
INFINITI controller and push the ENTER
button.
Whenever a menu selection is made or
menu item is highlighted, different areas
on the screen provide you with important
information. See the following for details.
1. Header:
Shows the path used to get to the
current screen.
2. Menu Selections:
Shows the options to choose within
that menu screen.
3. UP/DOWN Movement indicator:
Shows that the INFINITI controller may
be used to move UP/DOWN on the
screen and select more options.
4. Menu Items Counter:
Shows the total number of items listed
across all pages for the current menu.
5. Footer/Information Line:
Provides more information (if available) about the menu selection currently
highlighted.

Black plate (196,1)
[ Edit: 2012/ 1/ 17 Model: V36-D ]4-18 Monitor, climate, audio, phone and voice recognition systems SAA2487
Clock settings (models with navi-
gation system) GUID-B9CF9FB9-D5FE-4867-98B3-5D7755C52672
The display as illustrated will appear when
pushing the SETTING button and selecting
the “ Clock ” key.
On-screen Clock: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
When this item is turned to ON, a clock is
always displayed in the upper right corner
of the screen.
This clock will indicate the time almost
exactly because it is always adjusted by
the GPS system. Clock Format (24h): GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
When this item is turned to ON, the 24-
hour clock is displayed. When this item is
not turned to ON, the 12-hour clock is
displayed.
Offset (hour)/(min): GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
Adjust the time by increasing or decreasing
per hour or per minute.
Daylight Saving Time: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
Turn this item to ON for daylight saving
time application.
Time Zone: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
Choose the time zone from the following
. Pacific
. Mountain
. Central
. Eastern
. Atlantic
. Newfoundland
. Hawaii
. Alaska SAA3019
Others settings (models with navi-
gation system) GUID-5502AFAA-980F-4CBD-AAF3-40F5218DA4F3
The Others settings display will appear
when pushing the SETTING button and
selecting the “ Others ” key.
The following items are available:
. Comfort
. Language & Units
. Voice Recognition
. Camera
. Sonar
. Image Viewer

Black plate (197,1)
[ Edit: 2012/ 1/ 17 Model: V36-D ]SAA2488
Models with navigation system
SAA3150
Models without navigation system Comfort settings GUID-E6BF814A-EA39-4468-827A-98326ACDC872
Models with navigation system:
The display as illustrated will appear when
pushing the SETTING button, selecting the
“ Others ” key and then selecting the
“ Comfort ” key. This key does not appear
on the display until the ignition switch is
pushed to the ON position.
Models without navigation system:
The display as illustrated will appear when
pushing the SETTING button and selecting
the “ Comfort ” key. This key does not
appear on the display until the ignition
switch is pushed to the ON position.
Auto Interior Illumination: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
When this item is turned to ON, the interior
lights will illuminate if any door is un-
locked.
Light Sensitivity: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
Adjust the sensitivity of the automatic
headlights higher (right) or lower (left).
Lift Steering Wheel on Exit (if so
equipped): GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
When this item is turned to ON, the
steering wheel moves upward for easy exit
if the ignition switch is in the LOCK
position and the driver ’ s door is opened. After getting into the vehicle and pushing
the ignition switch to the ACC position, the
steering wheel moves to the previous
position.
Slide Driver Seat Back on Exit (if so
equipped): GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
When this item is turned to ON, the driver ’ s
seat moves backward for easy exit if the
ignition switch is in the OFF position and
the driver ’ s door is opened. After getting
into the vehicle and pushing the ignition
switch to the ACC position, the driver ’ s seat
moves to the previous position.
Light Off Delay: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
Choose the duration of the automatic
headlight off timer from 0, 30, 45, 60, 90,
120, 150 and 180 second periods.
Speed Sensing Wiper Interval (if so
equipped): GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
When this item is turned to ON, the wiper
interval is adjusted automatically accord-
ing to the vehicle speed.
Selective Door Unlock: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
When this item is turned to ON, only the
driver ’ s door is unlocked first after the door
unlock operation. When the door handle
request switch on the driver ’ s or front
Monitor, climate, audio, phone and voice recognition systems
4-19

Black plate (203,1)
[ Edit: 2012/ 1/ 17 Model: V36-D ]. On a snow-covered or slippery road,
there may be a difference between the
predicted course line and the actual
course line.
. If the battery is disconnected or be-
comes discharged, the predicted course
lines may not be displayed correctly. If
this occurs, drive the vehicle on a
straight road for more than 5 minutes.
. The displayed lines will appear slightly
off to the right because the rearview
camera is not installed in the rear center
of the vehicle.
. The distance guide line and the vehicle
width guide line should be used as a
reference only when the vehicle is on a
level paved surface. The distance viewed
on the monitor is for reference only and
may be different than the actual distance
between the vehicle and displayed ob-
jects.
. When backing up the vehicle up a hill,
objects viewed in the monitor are further
than they appear. When backing up the
vehicle down a hill, objects viewed in the
monitor are closer than they appear. Use
the inside mirror or glance over your
shoulder to properly judge distances to other objects.
The vehicle width and predicted course
lines are wider than the actual width and
course.
SAA1897
1. Visually check that the parking space is
safe before parking your vehicle.
2. The rearview of the vehicle is displayed
on the screen
* A
as illustrated when
the selector/shift lever is moved to the
“ R ” (Reverse) position.
Monitor, climate, audio, phone and voice recognition systems
4-25

Black plate (207,1)
[ Edit: 2012/ 1/ 17 Model: V36-D ]SAA2404
Models with navigation system
SAA2606
Models without navigation system PREDICTIVE COURSE LINE SETTINGS GUID-E2F40034-05E0-401F-9E99-A34483BA8B36
To turn ON or OFF the predictive course line
display, push the SETTING button, select
the “ Camera ” key and push the ENTER
button.
. Predictive Course Lines
When this item is turned to ON, the
predicted course lines will be displayed
on the monitor when the selector/shift
lever is in the “ R ” (Reverse) position.
HOW TO ADJUST SCREEN GUID-8EC63937-DDFF-48F5-9E13-CE42D28EBED6
To adjust the Display ON/OFF, Brightness,
Tint, Color, Contrast and Black Level of the
rearview monitor, push the SETTING button
with the rearview monitor on, select the
“ Display ” key on the screen and select the
item key and adjust the level using the
INFINITI controller.
Do not adjust the Brightness, Tint, Color,
Contrast and Black Level of the rearview
monitor while the vehicle is moving. Make
sure the parking brake is firmly applied
and the engine is not running. OPERATING TIPS GUID-C7806C41-88DD-4A7A-BEE4-AA3328E302E3
. When the selector/shift lever is shifted
to the “ R ” (Reverse) position, the
monitor screen automatically changes
to the rearview monitor mode. How-
ever, the radio can be heard.
. It may take some time until the rearview
monitor is displayed after the selector/
shift lever has been shifted to “ R ” from
another position or to another position
from “ R ” . Objects may be distorted
momentarily until the rearview monitor
screen is displayed completely.
. When the temperature is extremely high
or low, the screen may not clearly
display objects. This is not a malfunc-
tion.
. When strong light directly enters the
camera, objects may not be displayed
clearly. This is not a malfunction.
. Vertical lines may be seen in objects on
the screen. This is due to strong
reflected light from the bumper. This
is not a malfunction.
. The screen may flicker under fluores-
cent light. This is not a malfunction.
. The colors of objects on the rearview
monitor may differ somewhat from
those of the actual object.
Monitor, climate, audio, phone and voice recognition systems
4-29

Black plate (211,1)
[ Edit: 2012/ 1/ 17 Model: V36-D ]4. To turn off the climate control system,
push the “ OFF ” button.
A visible mist may be seen coming from the
ventilators in hot, humid conditions as the
air is cooled rapidly. This does not indicate
a malfunction.
Heating (A/C OFF): GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
The air conditioner does not activate in this
mode. When you need to heat only, use
this mode.
1. Push the “ AUTO ” button on.
2. Push the “ A/C ” button. (The A/C
indicator will turn off.)
3. Turn the temperature control dial to set
the desired temperature.
. The temperature of the passenger
compartment will be maintained auto-
matically. Air flow distribution and fan
speed are also controlled automati-
cally.
. Do not set the temperature lower than
the outside air temperature. Otherwise
the system may not work properly.
. Not recommended if windows fog up.
Dehumidified defrosting or defogging: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
1. Push the “ ” front defroster button.
(The indicator light on the button will come on.)
2. Turn the temperature control dial to set
the desired temperature.
. To quickly remove ice from the outside
of the windows, push the fan speed
increase button “
” and set it to the
maximum position.
. As soon as possible after the wind-
shield is clean, push the “ AUTO ” button
to return to the auto mode.
. When the “
” front defroster button
is pushed, the air conditioner will
automatically be turned on at outside
temperatures above 23 8 F ( − 5 8 C) to
defog the windshield, and the air
recirculate mode will automatically be
turned off.
Outside air is drawn into the passenger
compartment to improve the defogging
performance.
Manual operation GUID-229B673E-2AED-4344-9C09-630604A66426
Fan speed control: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
Push the fan speed increase “ ” or
decrease “
” buttons to manually con-
trol the fan speed.
Push the “ AUTO ” button to return to
automatic control of the fan speed. Air recirculation: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
Push the intake air control button “
” to recirculate interior air inside the
vehicle. The indicator light on the “
”
side will come on.
The air recirculation mode cannot be
activated when the air conditioner is in
the front defrosting mode “
” .
Outside air circulation: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
Push the intake air control button “
” to draw outside air into the passen-
ger compartment. The indicator light on the
“
” side will come on.
Automatic intake air control: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
In the AUTO mode, the intake air will be
controlled automatically. To manually con-
trol the intake air, push the intake air
control button “
” . To return to the
automatic control mode, push the intake
air control button “
” for about 2
seconds. The indicator lights (both air
recirculation and outside air circulation
sides) will flash twice, and then the intake
air will be controlled automatically.
Monitor, climate, audio, phone and voice recognition systems
4-33

Black plate (213,1)
[ Edit: 2012/ 1/ 17 Model: V36-D ]2. Use the temperature control dial to set
the desired temperature. .
The temperature can be set within
the following range.
— For U.S.: 60 to 90 8 F (16 to 32 8 C)
— For Canada: 64 to 90 8 F (18 to
32 8 C) .
The temperature of the passenger
compartment will be maintained
automatically. Air flow distribution
and fan speed will also be controlled
automatically.
3. To turn off the climate control system,
push the “ OFF ” button.
A visible mist may be seen coming from the
ventilators in hot, humid conditions as the
air is cooled rapidly. This does not indicate
a malfunction.
Heating (A/C OFF): GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
The air conditioner does not activate in this
mode. When you need to heat only, use
this mode.
1. Push the “ AUTO ” button on.
2. Push the “ A/C ” button. (The A/C
indicator will turn off.)
3. Turn the temperature control dial to set
the desired temperature. . The temperature of the passenger
compartment will be maintained auto-
matically. Air flow distribution and fan
speed are also controlled automati-
cally.
. Do not set the temperature lower than
the outside air temperature. Otherwise
the system may not work properly.
. Not recommended if windows fog up.
Dehumidified defrosting or defogging: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
1. Push the “ ” front defroster button.
(The indicator light on the button will
come on.)
2. Turn the temperature control dial to set
the desired temperature.
. To quickly remove ice from the outside
of the windows, turn the “
” fan
speed control dial and set it to the
maximum position.
. As soon as possible after the wind-
shield is clean, push the “ AUTO ” button
to return to the auto mode.
. When the “
” front defroster button
is pushed, the air conditioner will
automatically be turned on at outside
temperatures above 23 8 F ( − 5 8 C) to
defog the windshield, and the air
recirculate mode will automatically be turned off.
Outside air is drawn into the passenger
compartment to improve the defogging
performance.
Manual operation GUID-1366819E-B7B2-452E-BFAE-A3526FCA00F5
Fan speed control: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
Turn the “ ” fan speed control dial to
manually control the fan speed.
Push the “ AUTO ” button to return to
automatic control of the fan speed.
Air recirculation: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
Push the intake air control button “
” to recirculate interior air inside the
vehicle. The indicator light on the “ ”
side will come on.
The air recirculation mode cannot be
activated when the air conditioner is in
the front defrosting mode “
” .
Outside air circulation: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
Push the intake air control button “
” to draw outside air into the passen-
ger compartment. The indicator light on the
“
” side will come on.
Automatic intake air control: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
In the AUTO mode, the intake air will be
controlled automatically. To manually con-
Monitor, climate, audio, phone and voice recognition systems
4-35

Black plate (214,1)
[ Edit: 2012/ 1/ 17 Model: V36-D ]4-36 Monitor, climate, audio, phone and voice recognition systemstrol the intake air, push the intake air
control button “
” . To return to the
automatic control mode, push the intake
air control button “
” for about 2
seconds. The indicator lights (both air
recirculation and outside air circulation
sides) will flash twice, and then the intake
air will be controlled automatically.
Air flow control: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
Pushing an air flow control button manu-
ally controls the air flow and selects the air
outlet to the following settings. : Air flows from center and side ventilators.
: Air flows from center and side ventilators and
foot outlets.
: Air flows mainly from foot outlets.
: Air flows from defroster and foot outlets.
To turn the system off GUID-72F0A526-1E4F-46F2-803C-E31F9547AE00
Push the OFF button. SAA2972
Type C
1. “ AUTO ” automatic operation button/
Temperature control dial (driver side)
2. “ A/C ” air conditioner ON/OFF button
3. “ ” fan speed increase button
4. “
” front defroster button
5. “ MODE ” manual air flow control but-
ton
6. “ DUAL ” zone control ON/OFF button/
Temperature control dial (passenger
side)
7. “ OFF ” button for climate control sys-
tem
8. “
” fan speed decrease button 9. “ ” rear window defroster button
(See “ Rear window and outside mirror
defroster switch ” (P.2-34).)
10. “
” auto-recirculation button/
intake air control button