rear entertainment INFINITI M35 2007 Factory Workshop Manual

AV-214
[WITH MOBILE ENTERTAINMENT SYSTEM]
TERMINALS AND REFERENCE VALUE FOR CONTROL UNIT
Revision: 2007 April2007 M35/M45
46
(L/Y)47
(W/L)RGB signal (B: blue) Input ONStart confirmation/adjust-
ment mode, and then dis-
play color bar by selecting
“Color Spectrum Bar” on
DISPLAY DIAGNOSIS
screen.
47
(W/L)Ground RGB ground – ON – Approx. 0 V
48
(G)Ground RGB area (YS) signal Input ONWhen inputting RGB image. Approx. 5 V
Set the selector lever in R
position, and then display
the rear view image.
49
(W)GroundHorizontal synchronizing
(HP) signalOutput ON –
50
(R)GroundVertical synchronizing
(VP) signalOutput ON –
51
(B)GroundRGB synchronizing sig-
nalInput ON –
52 – Shield – – – –
53
(B)Ground Ground – ON – Approx. 0 V
54
(L)Ground Battery power supply Input OFF – Battery voltage
55
(V)Ground ACC power supply Input ACC – Battery voltage
56
(G)Ground Ignition signal Input ON – Battery voltage
57
(W)GroundRemote control receiver
VCCOutput ON – Approx. 5 V Terminal
(Wire color)
ItemSignal
input/
outputCondition
Reference value
+–Ignition
SwitchOperation
SKIB2237J
PKIB4948J
SKIB0825E
SKIB0823E
SKIB0825E

TERMINALS AND REFERENCE VALUE FOR CONTROL UNIT
AV-215
[WITH MOBILE ENTERTAINMENT SYSTEM]
C
D
E
F
G
H
I
J
L
MA
B
AV
Revision: 2007 April2007 M35/M45
Front Display UnitNKS004AQ
58
(B)Ground Remote control signal Output ONRear seat remote controller
operation
59 – Shield – – – –
60
(L)GroundHeadphone amp ON sig-
nalInput ONHeadphone mode is ON. Approx. 4 V
Headphone mode is OFF. Approx. 0 V Terminal
(Wire color)
ItemSignal
input/
outputCondition
Reference value
+–Ignition
SwitchOperation
PKIB6988J
Terminal
(Wire color)
ItemSignal
input/
outputCondition
Reference value
+–Ignition
switchOperation
1
(B)8
(G)RGB signal (R: red) Input ONStart confirmation/adjust-
ment mode, and then dis-
play color bar by selecting
“Color Spectrum Bar” on
DISPLAY DIAGNOSIS
screen.
2
(L/G)Ground RGB area (YS) signal Input ONWhen inputting RGB image. Approx. 5 V
Set the selector lever in R
position, and then display
the rear view image.
3
(W)8
(G)RGB signal (G: green) Input ONStart confirmation/adjust-
ment mode, and then dis-
play color bar by selecting
“Color Spectrum Bar” on
DISPLAY DIAGNOSIS
screen.
4
(W/L)GroundHorizontal synchronizing
(HP) signalOutput ON –
SKIB2238J
PKIB4948J
SKIB2236J
SKIB0825E

AV-216
[WITH MOBILE ENTERTAINMENT SYSTEM]
TERMINALS AND REFERENCE VALUE FOR CONTROL UNIT
Revision: 2007 April2007 M35/M45
5
(R)8
(G)RGB signal (B: blue) Input ONStart confirmation/adjust-
ment mode, and then dis-
play color bar by selecting
“Color Spectrum Bar” on
DISPLAY DIAGNOSIS
screen.
6
(O/L)GroundVertical synchronizing
(VP) signalOutput ON –
7
(L/Y)GroundRGB synchronizing sig-
nalOutput ON –
8
(G)Ground RGB ground – ON – Approx. 0 V
10 – Shield – – – –
11
(Y)Ground Camera image signal Input ONSet the selector in R posi-
tion, and then display the
rear view image.
12 – Shield – – – –
13
(B/R)GroundComposite synchroniz-
ing signalInput ON –
14 – Shield – – – –
15
(BR)Ground Composite image signal Input ON DVD image Te r m i n a l
(Wire color)
ItemSignal
input/
outputCondition
Reference value
+–Ignition
switchOperation
SKIB2237J
SKIB0823E
SKIB0826E
SKIB0827E
SKIA0187E
SKIB2251J

TERMINALS AND REFERENCE VALUE FOR CONTROL UNIT
AV-217
[WITH MOBILE ENTERTAINMENT SYSTEM]
C
D
E
F
G
H
I
J
L
MA
B
AV
Revision: 2007 April2007 M35/M45
Rear Display UnitNKS004AR
17
(W/L)GroundCommunication signal
(DISP-CONT)Output ONWhen adjusting display
brightness.
18 – Shield – – – –
19
(O/L)GroundCommunication signal
(CONT-DISP)Input ONWhen adjusting display
brightness.
20
(V)Ground ACC power supply Input ACC – Battery voltage
21
(L)Ground Battery power supply Input OFF – Battery voltage
23
(B)Ground Ground – ON – Approx. 0 V Terminal
(Wire color)
ItemSignal
input/
outputCondition
Reference value
+–Ignition
switchOperation
PKIB5039J
PKIB5039J
Terminal
(Wire color)
ItemSignal
input/
outputCondition
Reference value
+–Ignition
switchOperation
1
(B/Y)Ground Ground – ON – Approx. 0 V
2
(B/Y)Ground Ground – ON – Approx. 0 V
3
(L/O)Ground Battery power supply Input OFF – Battery voltage
4
(L/Y)Ground Battery power supply Input OFF – Battery voltage
6
(W/L)Ground ACC power supply Input ACC – Battery voltage
8 – Shield – – – –
9
(L)GroundCommunication signal
(DISP-DIST)Output ONWhen adjusting display
brightness.
PKIB5039J

AV-218
[WITH MOBILE ENTERTAINMENT SYSTEM]
TERMINALS AND REFERENCE VALUE FOR CONTROL UNIT
Revision: 2007 April2007 M35/M45
10
(B/W)GroundCommunication signal
(DIST-DISP)Input ONWhen adjusting display
brightness.
12
(L/W)Ground Ignition signal InputON – Approx. 0 V
ACC – Approx. 5 V
14 – Shield – – – –
15
(LG)GroundImage synchronizing sig-
nalInput ONRear display
DVD image
16
(V)Ground Composite image signal Input ONRear display
DVD image
17
(W/L)Ground RGB area (YS) signal Input ONWhen inputting RGB image. Approx. 5 V
Rear display
DVD image
18 – Shield – – – –
19
(L/O)GroundVertical synchronizing
(VP) signalOutput ON –
20
(L/Y)GroundHorizontal synchronizing
(HP) signalOutput ON –
21
(B)Ground RGB ground – ON – Approx. 0 V Terminal
(Wire color)
ItemSignal
input/
outputCondition
Reference value
+–Ignition
switchOperation
PKIB5039J
SKIA0187E
SKIB2251J
PKIB4949J
SKIB0823E
SKIB0825E

TERMINALS AND REFERENCE VALUE FOR CONTROL UNIT
AV-221
[WITH MOBILE ENTERTAINMENT SYSTEM]
C
D
E
F
G
H
I
J
L
MA
B
AV
Revision: 2007 April2007 M35/M45
*: BOSE surround 5.1ch system33
*
(R/Y)– Shield – – – –
34
*
(R/L)42
*
(G)DVD sound signal front
RHOutput ON
When playing DVDCAUTION
35*
(L/Y)43
*
(L)DVD sound signal front
LHOutput ON
When playing DVDCAUTION
36*
(R/B)44
*
(R)DVD sound signal
centerOutput ON
When playing DVDCAUTION
37*
(Y/B)45
*
(Y)DVD sound signal woofer Output ON
When playing DVDCAUTION
38*
(G/R)– Shield – – – –
39
*
(Y/L)47
*
(W/L)DVD sound signal rear
RHOutput ON
When playing DVDCAUTION
40*
(O/L)48
*
(O)DVD sound signal rear
LHOutput ON
When playing DVDCAUTION
46*
(G/W)– Shield – – – –
49
(B)Ground Ground – ON – Approx. 0V Terminal
ItemSignal
input/
outputCondition
Reference value
+–Ignition
switchOperation
SKIB3609E
SKIB3609E
SKIB3609E
PKIB6116J
SKIB3609E
SKIB3609E

AV-222
[WITH MOBILE ENTERTAINMENT SYSTEM]
TERMINALS AND REFERENCE VALUE FOR CONTROL UNIT
Revision: 2007 April2007 M35/M45
CAUTION:
When the stereo sound is played, only front RH and LH are output. When the monaural sound is played, only center is output.
All surround sounds are input only when the 5.1 channel surround sound is played.
Headphone AmpNKS004AT
Terminal
(Wire color)
ItemSignal
input/
outputCondition
Reference value
+–Ignition
switchOperation
1
(W)2
(B)Headphone signal LH Input ON When playing DVD
3 – Shield – – – –
4 – Shield – – – –
5
(L)6
(G)Headphone signal RH Input ON When playing DVD
10
(L/W)Ground Headphone ON signal Input ONHeadphone mode is ON. Approx. 4 V
Headphone mode is OFF. Approx. 0 V
11
(B/W)Ground Ground – ON – Approx. 0 V
12
(Y)Ground Battery power supply Input OFF – Approx. 12 V
14
(W/L)GroundRemote control receiver
VCCInput ON – Approx. 5 V
15
(L/O)Ground Remote control signal Output ONRear seat remote controller
operation
16 – Shield – – – –
SKIB3609E
SKIB3609E
PKIB6988J

TERMINALS AND REFERENCE VALUE FOR CONTROL UNIT
AV-223
[WITH MOBILE ENTERTAINMENT SYSTEM]
C
D
E
F
G
H
I
J
L
MA
B
AV
Revision: 2007 April2007 M35/M45
Camera Control UnitNKS004AU
Terminal
(wire color)
ItemSignal
input/
outputCondition
Reference value
+–Ignition
switchOperation
5–Shield –– – –
6
(P/L)Ground Camera image signal Input ONSet selector lever in R posi-
tion, and then display the
rear view image.
7
(G/B)Ground Camera ground – ON – Approx. 0 V
8
(GR)Ground Camera ON signal Output ONSet selector lever in R posi-
tion, and then display the
rear view image.Approx. 6 V
11 – S h i e l d – – – –
12
(Y)Ground Camera image signal Output ONSet selector lever in R posi-
tion, and then display the
rear view image.
14
(V)GroundCamera-connection rec-
ognition signalOutput ON – Approx. 0 V
17
(G)–Communication signal
(L)Input/
Output–– –
18
(R)–Communication signal
(H)Input/
Output–– –
19
(R)–Communication signal
(L)Input/
Output–– –
20
(W)–Communication signal
(H)Input/
Output–– –
22
(LG)Ground Reverse signalInput/
OutputONSelect lever in R position. Approx. 12 V
Other than selector lever in
R position.Approx. 0 V
SKIB0827E
SKIB0827E

DIAGNOSIS SYSTEM
AV-227
[WITH MOBILE ENTERTAINMENT SYSTEM]
C
D
E
F
G
H
I
J
L
MA
B
AV
Revision: 2007 April2007 M35/M45
On Board Diagnosis Item
*: With navigation system
STARTING PROCEDURE
1. Start the engine.
2. Turn the audio system OFF.
3. While pushing the “SETTING” button, turn the volume control
dial clockwise or counterclockwise for 40 clicks or more. (When
the self-diagnosis mode is started, a short beep will be heard.)

Shifting from current screen to previous screen is performed
by pushing “BACK” button.
Mode Description
Self Diagnosis

AV (NAVI) control unit diagnosis and connection diagnosis between
AV (NAVI) control unit and each unit

The DVD-ROM drive diagnosis of NAVI control unit and the connec-
tion diagnosis between NAVI control unit and GPS antenna can be
performed
(DVD-ROM drive will not be diagnosed when no map DVD-ROM is in
it.)
Confirmation/
AdjustmentDisplay DiagnosisThe tint can be confirmed by the color spectrum bar display. The shad-
ing of color can be confirmed by the gradation bar display.
Vehicle SignalsDiagnosis of signals can be performed for vehicle speed, parking brake,
lights, ignition switch, and reverse.
Speaker Test The connection of a speaker can be confirmed by test tone.
Climate Control Start auto air conditioner system self-diagnosis.
Navigation
*
Steering Angle
AdjustmentWhen there is a difference between the actual turning angle and the
vehicle mark turning angle, it can be adjusted.
Speed CalibrationWhen there is a difference between the current location mark and the
actual location, it can be adjusted.
Error HistoryThe system malfunction and the frequency when occurred in the past
are displayed. When the malfunctioning item is selected, the time and
place that the selected malfunction last occurred are displayed.
Synchronizer FES clock –
Vehicle CAN Diagnosis The transmitting/receiving of CAN communication can be monitored.
AV COMM DiagnosisThe communication condition of each unit of Multi AV system can be
monitored.
Handsfree PhoneThe received volume adjustment of hands-free phone, microphone
speaker check, and erase memory can be performed.
Rear DisplayTilt angle adjustment range and automatic retraction ON/OFF when
ignition switch is turned OFF can be selected
Camera Cont.The signal connected to camera control unit can be checked and the
guiding line position that overlaps rear view camera image can be
adjusted.
Bluetooth The passkey and the name of device can be checked and changed
Delete Unit Connection Log Erase the connection history of unit and error history
SKIB3655E

DIAGNOSIS SYSTEM
AV-229
[WITH MOBILE ENTERTAINMENT SYSTEM]
C
D
E
F
G
H
I
J
L
MA
B
AV
Revision: 2007 April2007 M35/M45
DIAGNOSIS RESULTS
Check the applicable display in the following table, and then repair the malfunctioning parts.
Control Unit Is Red, Gray, or Yellow
Connection Line Between Units Is Yellow (Only 1 Line)
Switch color Description Possible malfunction/Action to take
Red AV (NAVI) control unit malfunction is detectedReplace AV (NAVI) control unit
Refer to AV-282, "
AV (NAVI) Control Unit"
Ye l l o w
(With NAVI)
Malfunction is detected on DVD-ROM drive pickup
lens in NAVI control unit

There is dirt and damage on the map disc

Map disc

NAVI control unit
Gray
(With NAVI)DVD-ROM not inserted is detected Insert map disc
Applicable parts Description Probable malfunction location
Control unit to Camera Cont.Camera-connection recognition signal malfunc-
tion is detected

Camera control unit power supply and ground
circuit

Camera-connection recognition signal circuit

AV (NAVI) Control unit

Camera control unit
Control unit to GPS Antenna GPS antenna connection malfunction is detected

GPS antenna feeder

GPS antenna

NAVI control unit
Control unit to DVD deck

DVD player power supply and ground circuit
malfunction is detected

Malfunction is detected on communication sig-
nal between DVD player and AV (NAVI) control
unit

DVD player power supply and ground circuit

DVD player

AV (NAVI) control unit
Control unit to Amplifier

BOSE amp power supply and ground circuit
malfunction is detected

Malfunction is detected on communication sig-
nal between BOSE amp and AV (NAVI) control
unit

BOSE amp power supply and ground circuit

BOSE amp

AV (NAVI) control unit
Control unit to Video Distrib-
utor

Video distributor power supply and ground cir-
cuit malfunction is detected

Malfunction is detected on communication sig-
nal between video distributor and AV (NAVI)
control unit

Video distributor power supply and ground cir-
cuit

Video distributor

AV (NAVI) control unit
Control unit to Front Display

Front display unit power supply and ground cir-
cuit malfunction is detected (The diagnosis
screen can be checked at rear display)

Malfunction is detected on communication cir-
cuit between front display unit and AV (NAVI)
control unit

Malfunction is detected on communication sig-
nal between front display unit and AV (NAVI)
control unit

Front display unit power supply and ground cir-
cuit

Front display unit

AV (NAVI) control unit
Control unit to Rear Switches

Rear control switch power supply and ground
circuit malfunction is detected

Malfunction is detected on communication sig-
nal between rear control switch and AV (NAVI)
control unit

Rear control switch power supply and ground
circuit

Rear control switch

AV (NAVI) control unit