seat memory INFINITI Q70 HYBRID 2015 Quick Reference Guide

15
Automatic Drive Positioner
Two positions for the driver’s seat, steering column
and outside mirrors can be stored in the automatic
drive positioner
1 memory.
Follow these steps to set the memory positions:
•
Confirm the shift lever is in the P (PARK) position.
• Push the ignition switch to the ON position.
• Adjust the driver’s seat, steering column and outside mirrors to the \
desired positions,
using the adjusting switches for each feature.
• Push the SET switch and within 5 seconds push the memory switch (1 or 2) for at least
1 second.
• The indicator light on the memory switch you select will illuminate for \
approximately
5 seconds.
• The driver’s seat, steering column and outside mirror positions are n\
ow set to your preferences.
These memorized positions can also be linked to your INFINITI Intelligen\
t Key.
To link a memorized position to your INFINITI Intelligent Key, press the\
UNLOCK button on
the key fob after completing the previous step.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
Outside Mirror Control Switch
To select the right or left side mirror, move the
switch
1 right or left.
Adjust each mirror to the desired position using the
switch
2 .
To fold the outside rearview mirrors, push the switch
3 to the
position. To unfold the outside rear-
view mirrors, push the switch
3 to the
position.
REVERSE TILT-DOWN FEATURE
When backing up the vehicle, the right or left outside mirror can be sel\
ected to automati-
cally turn downward.
1. Push the ignition switch to the ON position.
2. Move the shift lever to the R (REVERSE) position.
3. Choose the right or left outside mirror by operating the outside mirror \
control switch 1 .
4. The outside mirror surface moves downward.
When one of the following conditions has occurred, the outside mirror su\
rface will return to
its original position.
• The shift lever is moved to any position other than R (REVERSE).
• The outside mirror control switch is set to the central or neutral posit\
ion.
• The ignition switch is pushed to the OFF position.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
1
23
1