key fob INFINITI Q70 HYBRID 2016 Quick Reference Guide

12
INFINITI Intelligent Key System
It is important to make sure the Intelligent Key is
with you (that is, in your pocket or purse).

The INFINITI Intelligent Key system allows you to
lock or unlock your vehicle, open your trunk and
start the hybrid system.
LOCKING AND UNLOCKING YOUR VEHICLE

The operating range of the Intelligent Key is within
31.5 in (80 cm) from each request switch.

To lock the vehicle, push either door handle request switch 1
once or press the
button 2 on the key fob.

To unlock the vehicle, perform one of the following procedures:
• Push either door handle request switch
1 once; the corresponding
door will unlock. Push the door handle request switch
1 again
within 1 minute; all other doors will unlock, or
• Press the
button 3 on the key fob to unlock the driver’s side door.
Press the
button 3 again; all other doors will unlock.

To open the trunk, press the button 4 for more than 1 second.

The Intelligent Key can also be used to activate the panic alarm by pres\
sing and holding
the
button 5 for more than 1 second. Once activated, the panic alarm and headlights \
will stay on for a period of time.
INTELLIGENT KEY BATTERY DISCHARGE

If the battery of the Intelligent Key is discharged or
environmental conditions interfere with the
Intelligent Key operation, start the hybrid system
according to the following procedure:
1. Move the shift lever to the P (PARK) position.
2. Firmly apply the foot brake.
3. Touch the ignition switch with the Intelligent Key,
and a chime will sound.
4. Within 10 seconds after the chime sounds, push the ignition switch while\
depressing
the brake pedal and the hybrid system will start.
For more information, refer to the “Pre-driving checks and adjustments (section 3)”, the “Starting and driving (section 5)” and
the “Maintenance and do-it-yourself (section 8)” of your Owner’s Manual.
1
2
3
4
5
first drive features
1932612_16a_Q70_HEV_US_pQRG_091715.indd 129/17/15 10:45 AM

13
Trunk Lid Release
Use one of the following methods to unlatch the trunk
lid then lift the lid to open the trunk:

Push the trunk open request switch 1 under the
trunk handle while carrying the INFINITI Intelligent
Key with you (that is, in your
pocket or purse).

Press the HOLD button 2 on the key fob for
more than 1 second.

From inside the vehicle, push the trunk lid release
switch
3 .
For more information, refer to the “Pre-driving checks and adjustments
(section 3)” of your Owner’s Manual.
1
2
123
Power Front Seat Adjustments
To slide the seat forward or backward, push the
switch

1 forward or backward.

To recline the seatback, push the switch 2
forward or backward.
SEAT LIFTER

To adjust the angle of the front seat cushion or
height of the seat, push the front or rear end of the
switch
1 up or down.
LUMBAR SUPPORT

To adjust the seat lumbar support, push the front or back end of the swi\
tch 3 .
For more information, refer to the “Safety — Seats, seat belts and supplemental restraint system (sectio\
n 1) ” of your
Owner’s Manual.
3
1932612_16a_Q70_HEV_US_pQRG_091715.indd 139/17/15 10:45 AM

14
Automatic Drive Positioner
Two positions for the driver’s seat, steering column
and outside mirrors can be stored in the automatic
drive positioner
1 memory.

Follow these steps to set the memory positions:
• Confirm the shift lever is in the P (PARK) position.
• Push the ignition switch to the ON position.
• Adjust the driver’s seat, steering column and outside mirrors to the \
desired positions
using the adjusting switches for each feature.
• Push the SET switch, and within 5 seconds, push the memory switch (1 or 2) for at least
1 second.
• The indicator light on the memory switch you select will illuminate for \
approximately
5 seconds.
• The driver’s seat, steering column and outside mirror positions are n\
ow set to
your preferences.

These memorized positions can also be linked to your INFINITI Intelligen\
t Key.

To link a memorized position to your INFINITI Intelligent Key, press the\
UNLOCK button on
the key fob after completing the previous step.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
Outside Mirror Control Switch
To select the right or left side mirror, move the
switch
1 right or left.

Adjust each mirror to the desired position using the
switch
2 .

To fold the outside rearview mirrors, push the switch
3 to the position. To unfold the outside
rearview mirrors, push the switch
3 to the position.
REVERSE TILT-DOWN FEATURE

When backing up the vehicle, the right or left outside mirror can be sel\
ected to
automatically turn downward.
1. Push the ignition switch to the ON position.
2. Move the shift lever to the R (REVERSE) position.
3. Choose the right or left outside mirror by operating the outside mirror \
control switch
1 .
4. The outside mirror surface moves downward.

When one of the following conditions has occurred, the outside mirror su\
rface will return to
its original position.
• The shift lever is moved to any position other than R (REVERSE).
• The outside mirror control switch is set to the central or neutral posit\
ion.
• The ignition switch is pushed to the OFF position.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
1
23
1
first drive features
1932612_16a_Q70_HEV_US_pQRG_091715.indd 149/17/15 10:45 AM