phone INFINITI QX30 2017 Owner's Manual

•Immediately after the ignition switch is
turned ON, it may be impossible to receive a
call for a short period of time.
•Do not place the cellular phone in an area
surrounded by metal or far away from the
in-vehicle phone module to prevent tone
quality degradation and wireless connection
disruption.
•While a cellular phone is connected through
the Bluetooth® wireless connection, the bat-
tery of the cellular phone may discharge
quicker than usual.
•If the Bluetooth® Hands-Free Phone System
seems to be malfunctioning, please visit
www.infinitiusa.com/bluetooth for trouble-
shooting help.
•Some cellular phones or other devices may
cause interference or a buzzing noise to be
emitted from the audio system speakers.
Storing the device in a different location may
reduce or eliminate the noise.
•Refer to the owner’s manual for the cellular
phone for information regarding the telephone
pairing procedure specific to your phone, bat-
tery charging, and cellular phone antenna, etc.
•The antenna display on the monitor may not
match the antenna display of some cellular
phones.
•The battery display on the monitor may not
match the battery display of some cellular
phones.
•Keep the interior of the vehicle as quiet as
possible to hear the caller’s voice clearly as
well as to minimize echoes.
•If reception between callers is unclear,
adjusting the incoming or outgoing call vol-
ume may improve the clarity.
REGULATORY INFORMATION
FCC Regulatory Information
FCC ID : HYQDNNS075
NOTE: This device complies with part 15 of the
FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause
harmful interference, and (2) this device must
accept any interference received, including in-
terference that may cause undesired operation.
FCC WARNING: Changes or modifications not
expressly approved by the party responsible for
compliance could void the user’s authority to
operate the equipment.
CAUTION : Radio Frequency Radiation Exposure
This equipment complies with FCC radiation
exposure limits set forth for uncontrolled envi-
ronment and meets the FCC radio frequency (RF)Exposure Guidelines. This equipment has very
low levels of RF energy that it deemed to comply
without maximum permissive exposure evalua-
tion (MPE). But it is desirable that it should be
installed and operated with at least 20cm and
more between the radiator and person’s body.
Co-location: This transmitter must not be co-
located or operated in conjunction with any
other antenna or transmitter.
IC Regulatory information
The antenna cannot be removed (and changed)
by user.
NOTE: This device complies Industry Canada
license-exempt RSS standard(s). Operation is
subject to the following two conditions: (1) This
device may not cause interference, and (2) this
device must accept any interference, including
interference that may cause undesired opera-
tion of the device.
CAUTION : Radio Frequency Radiation Exposure
This equipment complies with IC radiation ex-
posure limits set forth for uncontrolled environ-
ment and meets RSS-102 of the IC radio fre-
quency (RF) exposure rules. This equipment has
very low levels of RF energy that it deemed to
comply without maximum permissive exposure
evaluation (MPE). But it is desirable that it
should be installed and operated with at least
Display screen, heater and air conditioner, and audio system4-87

20cm and more between the radiator and per-
son’s body.
Co-location: This transmitter must not be co-
located or operated in conjunction with any
other antenna or transmitter.
This Class B digital apparatus meets all require-
ments of the Canadian Interference Causing
Equipment Regulations.
The Bluetooth® word mark and logos are reg-
istered trademarks owned by Bluetooth SIG,
Inc. and any use of such marks by DENSO
CORPORATION is under license. Other trade-
marks and trade names are those of their
respective owners.
PHONE
Connecting Bluetooth® Hands-Free
Phone
The cellular phone must be connected to the
Bluetooth® Hands-Free Phone System before
commencing operation. Up to 5 cellular phones
can be connected to the system.
SeeConnecting Bluetooth® devicelater in
this section
Phone selection
Select one of the connected devices for opera-
tion.
1. Push

•[Phonebook]:
Select a telephone number from the
phonebook.
The telephone number must be trans-
ferred to the phonebook from the cellular
phone prior to using this method.
Phone and text message settingsearlier
in this section
•[Dial Number]:
Input the phone number manually using
the keypad displayed on the screen.
Touch [
] to call the number.
How to input letters and numbersearlier
in this section
3. The number will be dialed and the screen
will change to the call in progress screen.
Receiving a call
When you received a phone call, a notification
message is displayed on the touch screen dis-
play with a ring tone.
Taking a call:
To answer a call, take one of the following
actions.
•Push<>on the steering wheel.
•Push<>on the INFINITI controller
(models without navigation system).
•Touch [Answer].
Reject a call:
To reject a call, touch [Decline].Receiving a call while on the line to another
person
:
When another phone call is received while on
the line to another person, a message box
informing you of the incoming call will appear
on the display.
Available items
Available
itemsAction
[Answer] Take the second call and put the first call
on hold.
[Decline] Reject the second call and keep the first
call on line.
NAA1654NAA1655
Display screen, heater and air conditioner, and audio system4-89

During a call
There are various options available during a
call. Select one of the following options dis-
played on the screen if necessary.Available items
Avail-
able
itemsAction
[Switch
Call]*Answer another incoming call. The person
you are talking to will be placed on hold.
Push once more to speak to the person
on hold again.
[Hang
Up]This disconnects the person you are cur-
rently connected to and will connect you
to the person who is on hold.
[Mute]/
[Cancel
Mute]When muted, your voice will not be heard
by the person on the other end of the line.
[Hold
Call]**Place the call on hold.
[Enter
Digits]Using the touch tone, send digits to the
connected party for using services such
as voicemail.
[Use
Handset]Transfer the call to the cellular phone.
[End All
Calls]*Hang up all calls including the ones that
were on hold.
*: Available when multiple lines are connected.
**: Available when a single line is connected.
•To adjust the volume of the person’s voice to
be louder or quieter, push<->/<+>on the
steering wheel or turn >on the
audio main button, while talking on the
phone.
•Touch [Mute] if you do not want your voice to
be heard by the person on the other end of
the line.
NAA1721
4-90Display screen, heater and air conditioner, and audio system

CONNECTING BLUETOOTH® DEVICE
Your vehicle is equipped with a Bluetooth®
Hands-Free Phone System and Bluetooth®
streaming audio device. If you are an owner of a
compatible Bluetooth® enabled cellular phone
or Bluetooth® audio device, you can set up the
wireless connection between your cellular
phone and the in-vehicle phone module, or
Bluetooth® audio and in-vehicle audio module.
With Bluetooth® wireless technology, you can
make or receive a telephone call with your
cellular phone in your pocket and listen to
music on your Bluetooth® streaming audio
device via the in-vehicle system.
Connecting cellular phone/audio
device
1. Push

HANDS-FREE TEXT MESSAGING
ASSISTANT
WARNING
•Use the text messaging feature after park-
ing your vehicle in a safe location. If you
have to use the feature while driving, exer-
cise extreme caution at all times so full at-
tention may be given to vehicle operation.
CAUTION
•This feature is disabled if the connected
device does not support the Message Ac-
cess Profile (MAP). Refer to the owner’s
manual for your phone for further details
and instructions.
Laws in some jurisdictions may restrict the use
ofText-to-Speech. Check local regulations be-
fore using this feature.
The text messaging assistant system allows the
sending and receiving of the text messages
through the vehicle interface.
Receiving a message
When the cellular phone connected to the vehicle
receives a text message, a notification is dis-
played on the display accompanied by a tone.
To check the message, touch [Check Now]. Touch
[Later] to save the message to be checked later.
Using the text message function with iPhone
R. If you would like to use the text message
function with your iPhone, please make the
below steps.
1) Connect iPhone
Rto the Bluetooth®
Hands-Free Phone System.
2)
Disconnect iPhoneRfrom vehicle setting
menu.
3) Turn “Show Notification” ON from
Bluetooth® setting menu on your iPhone
R.
4) Connect iPhone
Rfrom vehicle setting
menu.
Displaying received message list
1. To display the phone menu screen, take one
of the following actions:
•Push

Received message screen
Touching [Check Now] on the new message
notification screen or selecting a message from
the message list will show details of the re-
ceived message on the display.
Available actions:
•[Next]:
Touch to read the next message.
•[Previous]:
Touch to read the previous message.
•[Reply]:
A reply template can be selected.
Sending a text messagelater in this section
•[Play]/[Stop]:
Touch [Play] to have the hands-free phone
system read out the received message.
Touch [Stop] to stop reading.
•[Add Template]:
The received text message can be added to
the template (text list).
•[Call]:
If the sender of the message is registered in
the Phonebook, touch this menu to make a
call to the sender.
•After the message is read out, a message
box will appear and an action can be se-
lected.
[Reply] Create a reply message.
Sending a text messagelater in this sec-
tion
[Next] Have the system read out the next message.
•If the sender’s name and address is regis-
tered in the Phonebook, the name of the
sender is displayed as sender information on
the screen.
Sending a text message
To display the phone menu screen, take one of
the following actions:
•Push

Available item Action
[To] [Keypad] Type in the address of the recipient using the keypad. Touch [OK]
to confirm the address.
[Phonebook] Select a recipient from the phonebook and touch [OK] to confirm.
[Template] Select from list Select an item from the message list. The selected text will be
added to the message to be sent.
[Edit Text Message
Replies]Select an item in the message list to be edited. Use the keypad to
edit the text and touch [OK] to complete editing.
[Send] Touch to send the message.PHONE AND TEXT MESSAGE SETTINGS
Phone settings
The Bluetooth® Hands-Free Phone System can
be set in detail according to the user’s prefer-
ence.
1. Push

Incoming Call Settings:
Setting item Action
[Ringtone] Select a type of ringtone.
Phonebook/Favorites Settings:
Setting item Action
[Configure
Phonebook Set-
tings][Automatic Transfer
Settings][Phonebook Auto Download] Turn automatic download of the phonebook from the cellular phone on/off.
[Call History Download] Turn automatic download of the cellular phone call history on/off.
[Manual Phonebook
Transfer][Transfer and Overwrite] (De-
pending on cellular phone)Manually transfer information from the phonebook on the cellular phone.
[Transfer and Add] (Depending
on cellular phone)
[Delete Phonebook] To delete a single item, select the item you wish to delete from the list. Touch [Delete All] to
delete all items. To delete multiple items, touch [Multiple Selection].
[Favorites Set-
tings][Delete Favorites] To delete a single item, select the item you wish to delete from the list. Touch [Delete All] to
delete all items. To delete multiple items, touch [Multiple Selection].
[Add to Favorites] [From Phonebook] Select items from the phonebook of the in-vehicle system to add to the favorites.
[From Outgoing Calls] Select items from the outgoing calls list of the in-vehicle system to add to the favorites.
[From Incoming Calls] Select items from the incoming calls list of the in-vehicle system to add to the favorites.
[From Missed Calls] Select items from the missed calls list of the in-vehicle system to add to the favorites.
[Delete Call His-
tory][Delete Outgoing Call History] To delete a single item, select the item you wish to delete from the list. Touch [Delete All] to
delete all items. To delete multiple items, touch [Multiple Selection].
[Delete Incoming Call History]
[Delete Missed Call History]
[Delete All Call History]
The volume of the ringtone, incoming call and outgoing call can also be adjusted.
Display screen, heater and air conditioner, and audio system4-95

Mail settings
Various settings can be changed from the Mail
Settings screen.
1. Push