tool number oil INFINITI QX56 2004 Factory Manual Online

ASSEMBLY
TF-151
C
E
F
G
H
I
J
K
L
MA
B
TF
Revision: August 20072004 QX56
10. Align the matchmark on front drive shaft with the mark on the
companion flange, then install the companion flange.
11. Install new companion flange self-lock nut, and tighten to specifi-
cation using suitable tool.
NOTE:
Do not reuse self-lock nut.
12. Apply ATF or petroleum jelly to the circumference of new rear oil
seal, and install using Tool as shown so that it is flush with case
tip face.
NOTE:

Apply multi-purpose grease to oil seal lip.

Do not reuse oil seal.
13. Apply ATF or petroleum jelly to the circumference of the new
dust cover. Position the dust cover using the identification mark
as shown.
NOTE:

Do not reuse the dust cover.

Identification mark should be set at the position shown.
14. Install new dust cover using Tool.
SDIA2214E
Companion flange self-
lock nut: 275 N·m (28 kg-m, 203 ft-lb)
SDIA2203E
Tool number : ST30720000 (J-25405)
SDIA2204E
SDIA2208E
Tool number : KV40105310 ( — )
SDIA2205E