4WD INFINITI QX56 2011 Factory Service Manual

DLN-26
< ECU DIAGNOSIS INFORMATION >[TRANSFER: ATX90A]
TRANSFER CONTROL UNIT
*1: 4WD shift swich (2WD) is not equipped, but it is displayed.
*2: This indicator is not equipped, but it is displayed.
*3: This switch is not equipped, but it is displayed.
TERMINAL LAYOUT
PHYSICAL VALUES
COMPR VHCL SPEEDVehicle stopped 0.00 km/h (0.00 mph)
Vehicle driving
CAUTION:
Check air pressure of tire under standard condition. Approx. equal to the indication
on speedometer (inside of ±10
%)
VHCL/S SEN-FR Vehicle stopped 0.00 km/h (0.00 mph)
Vehicle driving
CAUTION:
Check air pressure of tire under standard condition. Approx. equal to the indication
on speedometer (inside of ±10
%)
VHCL/S SEN-RR Vehicle stopped 0.00 km/h
Vehicle driving
CAUTION:
Check air pressure of tire under standard condition. Approx. equal to the indication
on speedometer (inside of ±10
%)
ENGINE SPEED Engine running Approx. equal to the indication
on tachometer (inside of ±10 %)
INTRNL SPEED SEN 4WD mode: AUTO
A/T shift selector: DDepress the accelerator pedal several
times.
Value is changing
TRANSFER TORQUE 4WD shift switch: AUTO 0 - 2250 N·m
4WD shift switch: 4H 0 - 2250 N·m
4WD shift switch: 4L 0 Nm
UNIT PARAMETER Always A1 - A9
B1 - B9
C1 - C9
D1 - D9
E1 - E9F1 - F9
G1 - G9 H1 - H9 J1 - J9
Monitor item Condition Value/Status
JPDIE0229ZZ
Te r m i n a l N o .
(Wire color) Description
Condition Value (Approx.)
+ - Signal name Input/
Output
6
(BR) Ground Hi-Lo position sensor 1 Input/
Output Engine run-
ning
(Never
drive the
vehicle.) 4WD mode: AUTO or 4H 0 V
4WD mode: Shifting 0 V
4WD mode: 4L 5 V
Revision: 2010 May2011 QX56

TRANSFER CONTROL UNITDLN-27
< ECU DIAGNOSIS INFORMATION > [TRANSFER: ATX90A]
C
EF
G H
I
J
K L
M A
B
DLN
N
O P
7
(Y) Ground
Transfer fluid tempera-
ture sensor power supply Input Engine running 0 – 5V
9
(G) Ground Transfer internal speed
sensor (GND) —Always 0 V
10
(Y/G) Ground Transfer internal speed
sensor (IMP)
Input IGN ON Transfer motor driving
11
(V) Ground 4WD shift SW (4Lo) Input IGN ON 4WD shift switch: 4L Battery voltage
4WD shift switch: Except
4L
0 V
12
(L) —CAN-H Input/
Output ——
13
(P) —CAN-L
Input/
Output ——
14
(W/R) Ground 4WD shift SW (AUTO) Input IGN ON 4WD shift switch: AUTO Battery voltage
4WD shift switch: Except
AUTO
0 V
15
(P/B) Ground Transfer rotary position
sensor (PWM)
Input IGN ON
16
(LG) Ground
Transfer rotary position
sensor (GND) —Always 0 V
17
(W/L) Ground Transfer lock position
sensor power supply InputIGN ON 5V
10 seconds or more later after ignition
switch turned OFF 0V
18
(BR/Y) Ground Transfer rotary position
sensor power supply
InputIGN ON 5V
10 seconds or more later after ignition
switch turned OFF 0V
20
(GR) Ground
Transfer control unit pow-
er supply Input Always Battery voltage
25
(P/L) Ground Hi-Lo position sensor 3 Input/
Output Engine
running
(Never
drive the
vehicle.) 4WD mode: AUTO or 4H 0 V
4WD mode: Shifting 5 V
4WD mode: 4L 5 V
28
(W) Ground
Transfer motor tempera-
ture sensor power supply InputIGN ON 0 – 5V
IGN OFF 0V
Te r m i n a l N o .
(Wire color) Description
Condition Value (Approx.)
+ - Signal name Input/
Output
JPDIE0267GB
JPDIE0268GB
Revision: 2010 May2011 QX56

DLN-28
< ECU DIAGNOSIS INFORMATION >[TRANSFER: ATX90A]
TRANSFER CONTROL UNIT
CAUTION:
When using circuit tester to measure voltage for in
spection, be sure not to extend forcibly any con-
nector terminals.
Fail-SafeINFOID:0000000006222228
 If any malfunction occurs in 4WD electrical system, and control unit detects the malfunction, 4WD warning
lamp on combination meter turns ON to indicate system malfunction.
 When 4WD warning lamp is ON, vehicle changes to rear-wheel drive or shifts to 4-wheel drive (front-wheels
still have some driving torque).
29
(LG/R) Ground Hi-Lo position sensor 2
Input/
Output Engine
running
(Never
drive the
vehicle.)
Always 0 V
30
(R/B) Ground Transfer lock position
sensor (GND) —Always 0 V
31
(L/O) Ground Transfer internal speed
sensor (DIR)
Input IGN ONWhen changing the trans-
fer motor rota
tion direc-
tion.
32
(BR/R) Ground IGN SW Input IGN ON Battery voltage
IGN OFF 0V
35
(R) Ground 4WD shift SW (4H) Input IGN ON 4WD shift switch: 4H Battery voltage
4WD shift switch: Except
4H
0 V
36
(L/R) Ground Transfer fluid tempera-
ture sensor (GND)
—Always 0 V
38
(G/O) Ground
Transfer lock position
sensor signal Input IGN ON
39
(R/W) Ground Transfer internal speed
sensor power supply
InputIGN ON 8 V
IGN OFF 0V
41
(W/R) Ground Transfer control actuator
power supply Input Always Battery voltage
43
(G/R) Ground Motor drive B Input/
Output Transfer motor driving 0V - Battery voltage
44
(B) Ground GND — Always 0 V
45
(G/Y) Ground Motor drive A Input/
Output Transfer motor driving 0V - Battery voltage
46
(B) Ground Transfer control actuator
(GND)
—Always 0 V
Te r m i n a l N o .
(Wire color) Description
Condition Value (Approx.)
+ - Signal name Input/
Output
JPDIE0269GB
JPDIE0268GB
Revision: 2010 May2011 QX56

TRANSFER CONTROL UNITDLN-29
< ECU DIAGNOSIS INFORMATION > [TRANSFER: ATX90A]
C
EF
G H
I
J
K L
M A
B
DLN
N
O P
DTC Inspection Priority ChartINFOID:0000000006222229
If some DTCs are displayed at the same time, per form inspections one by one based on the following priority
chart.
DTC IndexINFOID:0000000006222230
Priority Detected items (DTC)
1  U1000 CAN COMM CIRCUIT
 U1010 CONTROL UNIT (CAN)
2  P1802 CONTROL UNIT 1
 P1803 CONTROL UNIT 2
 P1804 CONTROL UNIT 3
 P1809 CONTROL UNIT 4
 P180C SEN POWER SUPPLY (5V)
 P180E SEN POWER SUPPLY (8V)
 P1811 BATTERY VOLTAGE
 P181B INCOMP SELFSHUT
 P181C MOTOR POWER SUPPLY
 P181F INCOMP CALIBRATION
3  P1807 VECL SPEED SEN-AT
 P1808 VECL SPEED SEN-ABS
 P1816 PNP SW/CIRC
 P181E ST ANGLE SEN SIG
 P1820 ENGINE SPEED SIG
 P1829 THROTTLE POSI SEN
 P1830 ABS OP SIG
 P1831 VDC OP SIG
 P1832 TCS OP SIG
4  P180D ROTARY POSITION SEN
 P1813 4WD MODE SW
 P181A MOTOR TEMP SEN
 P1826 OIL TEMP SEN
 P182A HI-LO POSITION SEN
 P182B LOCK POSITION SEN
5  P180F MOTOR SYSTEM
 P1817 SHIFT ACTUATOR
DTC Display Items Reference
P1802 CONTROL UNIT 1 DLN-51, "
DTC Logic"
P1803 CONTROL UNIT 2DLN-51, "DTC Logic"
P1804 CONTROL UNIT 3DLN-51, "DTC Logic"
P1807 VHCL SPEED SEN-ATDLN-52, "DTC Logic"
P1808 VHCL SPEED SEN-ABSDLN-53, "DTC Logic"
P1809 CONTROL UNIT 4DLN-51, "DTC Logic"
P180C SEN POWER SUPPLY (5V) DLN-54, "DTC Logic"
P180D ROTARY POSITION SENDLN-57, "DTC Logic"
P180E SEN POWER SUPPLY (8V)DLN-59, "DTC Logic"
P180F MOTOR SYSTEMDLN-61, "DTC Logic"
P1811 BATTERY VOLTAGEDLN-64, "DTC Logic"
P1813 4WD MODE SW DLN-67, "DTC Logic"
P1816 PNP SW/CIRCDLN-69, "DTC Logic"
P1817 SHIFT ACTUATORDLN-70, "DTC Logic"
P181A MOTOR TEMP SEN DLN-72, "DTC Logic"
P181B IMCOMP SELFSHUTDLN-74, "DTC Logic"
Revision: 2010 May2011 QX56

4WD SYSTEMDLN-31
< WIRING DIAGRAM > [TRANSFER: ATX90A]
C
EF
G H
I
J
K L
M A
B
DLN
N
O P
WIRING DIAGRAM
4WD SYSTEM
Wiring DiagramINFOID:0000000006222231
JCDWM1069GB
Revision: 2010 May2011 QX56

DLN-32
< WIRING DIAGRAM >[TRANSFER: ATX90A]
4WD SYSTEM
JCDWM1070GB
Revision: 2010 May2011 QX56

4WD SYSTEMDLN-33
< WIRING DIAGRAM > [TRANSFER: ATX90A]
C
EF
G H
I
J
K L
M A
B
DLN
N
O P
JCDWM1071GB
Revision: 2010 May2011 QX56

DLN-34
< WIRING DIAGRAM >[TRANSFER: ATX90A]
4WD SYSTEM
JCDWM1072GB
Revision: 2010 May2011 QX56

4WD SYSTEMDLN-35
< WIRING DIAGRAM > [TRANSFER: ATX90A]
C
EF
G H
I
J
K L
M A
B
DLN
N
O P
JCDWM1073GB
Revision: 2010 May2011 QX56

DLN-36
< WIRING DIAGRAM >[TRANSFER: ATX90A]
4WD SYSTEM
JCDWM1074GB
Revision: 2010 May2011 QX56