audio INFINITI QX60 2018 Owner's Manual

to the parking spaceCwhile referring
to the predicted course lines.
5. When the vehicle is parked in the space completely, move the shift lever to the P
(Park) position and apply the parking
brake.
HOW TO SWITCH THE DISPLAY
With the ignition switch in the ON position,
press the CAMERA button or move the shift
lever to the R (Reverse) position to operate
the Around View® Monitor.
The Around View® Monitor displays different
split screen views depending on the position of
the shift lever. Press the CAMERA button to
switch between the available views.
If the shift lever is in the R (Reverse) position,
the available views are:
∙ Rear view/bird’s-eye view split screen
∙ Rear view/front-side view split screen
∙ Rear-wide view
If the shift lever is in the P (Park) position, the
available views are: ∙ Front view/bird’s-eye view split screen
∙ Front view/front-side view split screen
∙ Front-wide view If the shift lever is in the D (Drive) position, the
only available view is front view/front-side
view split screen.
The display will switch from the Around
View® Monitor screen when:
∙ The shift lever is in the D (Drive) position and the vehicle speed increases above
approximately 10 km/h (6 mph).
∙ A different screen is selected.
PARKING GUIDANCE
(if so equipped)
The system is designed to guide the driver
during parking procedures, including: ∙ starting position and steering angle for backing up.
∙ using the bird’s-eye and front/rear view.
∙ slot parking and parallel parking (with voice guidance).
The system detects parking frame lines using
image processing and displays lines on the
monitor.
NOTICE
∙ When setting the target parking frame, the system detects parking frame lines
through image processing and displays
the target parking frame in the center of
the parking frame lines.
∙ When there is no parking frame line or when the parking frame lines cannot be
detected, the target parking frame is dis-
played in a default location in blue.
∙ When there are multiple parking frames detected, the candidate frame is dis-
played in green. Touch the frame to set
the candidate frame as the target park-
ing frame.
How to park with parking guidance
CAUTION
The parking guide is a guidance system for
parking procedures. It does not prevent
collision with obstacles. Always look out
the windows and check to be sure that it
safe to move before operating the vehicle.
Monitor, climate, audio, phone and voice recognition systems4-11

WARNING
The parking guide may not function prop-
erly under the below operations and
environments:– Sudden acceleration, sudden braking, sudden turn of the steering wheel or
sudden shift of the shift lever
– On non-level, paved surfaces such as hills or bumpy or stepped roads
– When the vehicle slips, such as on a snowy road
– When tire chains are equipped
– When the image and the actual road differ
– When vehicle is continuously moving at an extremely low speed
– When the wheels are misaligned
When the vehicle deviates from the parking
frame while following the parking procedure,
check that the surroundings are safe and ad-
just the position. The parking guide terminates under the fol-
lowing conditions:
∙ When the vehicle speed is above 10 km/h (6 mph).
∙ When the parking procedure is not fol- lowed according to the guide
∙ When “End” is selected
4-12Monitor, climate, audio, phone and voice recognition systems

Parking guidance screen
1Starting position frame for backing
up/position switch frame
Indicates the starting position for back-
ing up. Starting position frame will
change color when steering wheel is
turned. Position switch frame is shown in
green.
2Target parking frame (blue)
Indicates the target parking position.
3Target predicted course lines (green)
Indicates the predicted course needed to
park into the target parking position.
4Clearance guidelines (red)
Indicates the approximate clearance re-
quired for parking.
5“End” key
Terminates the parking guidance.
6“View Change” key
Toggles the left side of the screen be-
tween the bird’s-eye view, front-side
view, front-wide view and rear-wide
view.
7“Replay” key
Replays the voice guidance.
8Direction indicator icon
Indicates the direction of the view on the
driver’s side part of the screen.
: Rear-view is displayed.
: Front-view is displayed.
9Predicted course lines (orange)
Indicates the predicted course when op-
erating the vehicle.
10“Hint” key
When this key is selected several screens
will be available to aid in the operation of
the Park Guidance System.
LHA4346
Monitor, climate, audio, phone and voice recognition systems4-13

Example of slot parking (right side)
Stop the vehicle at approximately1mtothe
side of the target and begin the parking pro-
cedure.1. Press the CAMERA button to display the bird’s-eye view.
2. Select “Park Guide”.
3. Select “Backward (R)”. 4. The parking position adjustment screen
will be displayed, showing the clearance
guidelines in red1and the target park-
ing frame in blue
2.
5. Adjust the target parking frame (blue) so that the clearance guidelines (red) do not
overlap with obstacles and set the park-
ing position. Use the up, down, left and
right keys on the screen
3to move the
target parking frame (blue). Use the
clockwise and counterclockwise keys on
the screen
4to rotate the target park-
ing frame (blue). Select “Start”. 6. The starting position frame for backing
up will be displayed in green
1. The
starting position frame is displayed in the
bird’s-eye view and front view.
∙ A green frame indicates the recom- mended position.
∙ A yellow frame indicates that switch- ing will be required.
∙ A red frame indicates that parking is not possible.
LHA4330LHA4331LHA4332
4-14Monitor, climate, audio, phone and voice recognition systems

7. While the vehicle is stationary, turn thesteering wheel until the starting position
frame turns green and then begin to
move forward into the starting position
frame
2.
8. Keep the steering wheel in its current position and move the vehicle slowly
forward. A chime will sound when the
vehicle fits into the frame.
9. Stop the vehicle and place the shift leverin the R (Reverse) position. 10. Predicted course lines (orange)
1and
target predicted course lines (green)
2
will be displayed on the screen. While the
vehicle is stationary, turn the steering
wheel until the predicted course lines
(orange) and target predicted course
lines (green) are overlapping. A chime
will sound when the two lines overlap.
LHA4333LHA4334
Monitor, climate, audio, phone and voice recognition systems4-15

11. Keep the steering wheel in its currentposition and move the vehicle slowly
backward toward the orange frame. A
chime will sound when the vehicle fits
into the frame. You can adjust the target
parking frame by turning the steering
wheel left or right during backing up.
12. Align the steering wheel and move the vehicle slowly backward toward the tar-
get parking frame.
13. Stop the vehicle.Example of parallel parking
(left side)
Stop the vehicle at approximately1mtothe
side of the target parking position and begin
the parking procedure. 1. Press the CAMERA button to display the bird’s-eye view.
2. Select “Park Guide”.
3. Select "Parallel (L)”. 4. The parking position adjustment screen
will be displayed, showing the clearance
guidelines in red1and the target park-
ing frame in blue
2.
5. Adjust the target parking frame (blue) so that the clearance guidelines (red) do not
overlap with obstacles and set the park-
ing position. Use the up, down, left and
right keys on the screen
3to move the
target parking frame (blue). Use the
clockwise and counterclockwise keys on
the screen
4to rotate the target park-
ing frame (blue).
LHA4335LHA4330LHA4336
4-16Monitor, climate, audio, phone and voice recognition systems

6. If the target parking space is narrow,select “Narrow Mode”
5. In this mode,
the target parking frame will turn yellow
and the space between the target park-
ing frame and the clearance guidelines
will become narrower. In this mode,
switching will be required. Select “Start”.
7. The starting position frame for backingup will be displayed in green
1. The
starting position frame is displayed in the
bird’s-eye view.
∙ A green frame indicates the recom- mended position.
∙ A yellow frame indicates that switch- ing will be required.
∙ A red frame indicates that parking is not possible. 8. While the vehicle is stationary, turn the
steering wheel until the starting position
frame turns green and then begin to
move forward into the starting position
frame
2.
9. Keep the steering wheel in its current position and move the vehicle slowly for-
ward. A chime will sound when the ve-
hicle fits into the frame.
LHA4337
Monitor, climate, audio, phone and voice recognition systems4-17

10. Stop the vehicle and place the shift leverin the R (Reverse) position. 11. Predicted course lines (orange)1and
target predicted course lines (green)
2
will be displayed on the screen. While the
vehicle is stationary, turn the steering
wheel until the predicted course lines (or-
ange) and target predicted course lines
(green) are overlapping. A chime will
sound when the two lines overlap. 12. Keep the steering wheel in its current
position and move the vehicle slowly
backward toward the position switch
frame
1(green). A chime will sound
when the vehicle fits into the orange
frame.
13. Stop the vehicle. Predicted course lines (orange) and target predicted course
lines (green) are displayed.
LHA4338LHA4339LHA4340
4-18Monitor, climate, audio, phone and voice recognition systems

14. When the vehicle is stationary, turn thesteering wheel until the predicted course
lines (orange) and target predicted
course lines (green)
1are overlapping. A
chime will sound when the two lines
overlap.
15. Back the vehicle up to the target parking frame (blue)
2.
16. Keep the steering wheel position in its current position and move the vehicle
slowly backward toward the blue frame.
A chime will sound when the vehicle fits
into the orange frame.
17. Stop the vehicle.
AROUND VIEW® MONITOR
SETTINGS
To set up the Around View® Monitor to your
preferred settings, press the SETTING but-
ton, select the “Camera/Sonar” key. For ad-
ditional information about the Sonar, refer to
“Camera aiding parking sensor (sonar)” in this
section. For information about the Display
screen adjustment, refer to “Adjusting the
screen” in this section.
Predicted Course Lines:
When this item is turned to ON, the predicted
course lines are displayed in the front view,
rear view and bird’s-eye view. Camera View Priority:
The view shown on the screen at the begin-
ning of the Around View® Monitor operation
can be selected in order of priority.
Non-viewable Area Reminder:
With this item turned to ON, the non-
viewable area is highlighted in yellow for
seven seconds after the bird’s-eye view is
displayed. It will only be shown the first time
after the ignition switch is placed in the ON
position.
LHA4341LHA4265LHA4266
Monitor, climate, audio, phone and voice recognition systems4-19

MOD Volume:
Adjusts the MOD volume between High, MID
or LOW by touching the “+” or “-” key on the
display screen. This feature is only available
when “Moving Object Detection” is on.
Automatic Display with Sonar:
When this item is turned to ON, the camera
view is automatically shown on the display in
the case that the distance to the objects
measured by the sonar is becoming short.Moving Object Detection (MOD):
When this item is turned to ON, the MOD is
activated. When this item is turned to OFF
(indicator turns off), the MOD system is de-
activated.ADJUSTING THE SCREEN
To adjust the Display ON/OFF, Brightness,
Tint, Color, Contrast and Black Level of the
Around View® Monitor, press the SETTING
button with the monitor on and select the
“Display”, touch the Camera or Camera/
Sonar key and select one of the items and
change the value by touching the “+” or “-” key
or by turning the INFINITI controller.
NOTE:
Do not adjust the Brightness, Tint, Color, Con-
trast and Black Level of the Around View®
Monitor while the vehicle is moving. Make sure
the parking brake is firmly applied.
LHA4267LHA4268
4-20Monitor, climate, audio, phone and voice recognition systems