change wheel INFINITI QX60 HYBRID 2015 Quick Reference Guide

6
Warning Systems Switch (if so equipped)
The warning systems switch
1 will turn on and
off the systems enabled in the vehicle information
display. The systems controlled by the warning
systems switch include:



•


Lane Departure Warning (LDW) system
•

Blind Spot Warning (BSW) system



•


Forward Collision Warning (FCW) system
When the warning systems switch is turned off, the indicator
2 on the switch is off. If the
warning systems switch is illuminated, the system is on. The indicator w\
ill also be off if all
of the warning systems are deactivated using the “Settings” menu.
To enable or disable these systems, perform the following operation:



•

Press the button
3 on the steering wheel
multiple times until you reach the
“Settings” menu.



•


Press up or down on the button
4, to select
the“Driver Assistance”
5 and “Driving Aids” 6
menu items.



•


Press the

ENTER button
4 to change a
menu item.
For more information, refer to the “Starting and driving (section 5)” of
your Owner’s Manual.
new system features
3
4
6
1
2
5
Approaching Vehicle Sound for Pedestrians (VSP) System
The VSP system helps alert pedestrians to the presence of the vehicle wh\
en it is being
driven at a low speed.
When the vehicle starts to move, it produces a sound. The sound stops wh\
en the vehicle
speed reaches approximately 19 mph (30 km/h) while accelerating.
This sound will activate again when decelerating to a speed less than 16\
mph (25 km/h).
For more information, refer to the “HEV Overview (section HEV)” of your Owner’s Manual.

23
Vehicle Information Display
The vehicle information display 1 displays items such as: Vehicle settings
Trip computer information
Energy flow meter
Drive system warnings and settings (if so equipped)
Cruise control system

Intelligent Cruise Control (ICC) system
(if so equipped) information
Intelligent Key operation information
Indicators and warnings
Tire pressure information
USING THE VEHICLE INFORMATION DISPLAY
The vehicle information display modes can be changed

using the
button
2 and ENTER button 3
located
on the steering wheel.
1.


Press
button
2 to enter the vehicle information menu items.
2.


Press button
4 to navigate through the items in the vehicle information.
3.


Press

ENTER
3 to change or select an item in the vehicle information display.
4.


Press button 5 to go back to the previous menu.
START UP DISPLAY
When the vehicle is placed in the ON or ACC position, the screens that display in the vehicle
information include:
Active system
status (if so
equipped) Trip computer
Tire pressure
information
Fuel economy

Warnings
(displays when a
warning is present)
RESETTING THE TRIP COMPUTER
1.


Press the
button
2 until you reach the trip
computer mode 6.
2.


Press the button 2 again for more than 1.5
seconds to reset average fuel consumption, average
speed, distance to empty and journey time.
SETTINGS
The setting mode allows you to change the information displayed in the v\
ehicle
information display:
Driver Assistance
(if so equipped)
Vehicle Settings
Main Menu Selection Body Color
Maintenance
Alarms
Language
Unit
Welcome Effects
Factory Reset
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
1
system guide
3
2
4
5
6

25
Bluetooth® System without Navigation (if so equipped)
CONNECTING PROCEDURE
1.

Press the button on the steering wheel. The
system announces the available commands.
2.


Say “Connect Phone”. The system
acknowledges the command and announces
the next set of available commands.
3.


Say “Add Phone”. The system acknowledges
the command and asks you to initiate
connecting from the phone handset.
4.


Initiate connecting from the phone.




•


The connecting procedure varies according to each cellular phone model. \

For detailed connecting instructions and a list of compatible phones, pl\
ease
visit

www.InfinitiUSA.com/bluetooth.



•


When prompted for a PIN, enter “1234” from the handset. (The PIN \
is assigned by
INFINITI and cannot be changed.)
5

.



Say the name of the phone when the system asks you to provide one. You c\
an give the
phone a name of your choice.
PHONEBOOK
Depending on the cellular phone, the system may automatically download t\
he entire
phonebook. For more information, please visit
www.InfinitiUSA.com/bluetooth or refer to
the cellular phone’s Owner’s Manual.
If the phonebook does not download automatically, 40 entries can be
individually downloaded.
To manually download entries:



1.

Push the button on the steering wheel.
2.
After the tone, say “Phonebook”.



3.


After the next tone, say “Transfer Entry”.




4.


Using the cellular phone, select an entry to send to the vehicle. Please\
consult the
website above or your phone’s Owner’s Manual for specific steps of\
the phone.



5.


The system will speak the transferred entry. Confirm the entry by saying\
“Yes” after the tone.
MAKING A CALL BY PHONEBOOK ENTRY
In some cases, names stored using all UPPERCASE letters may not be recog\
nized by the
Voice Recognition system.
1.


Press the button.
2.


After waiting for the tone, say “Call”.
3.


After the next tone, speak a name of a phonebook entry. For example, “\
Michael Smith”.
4.


Confirm the correct name is recognized by saying “Dial” after the \
tone.