seat memory INFINITI QX70 2015 Quick Reference Guide

8
first drive features
Automatic Drive Positioner (if so equipped)
Two positions for the driver’s seat, steering column
and outside mirrors can be stored in the automatic
drive positioner memory.
SEAT MEMORY CONTROLS (if so equipped)

Follow this procedure to set the memory positions:
• Confirm the shift lever is in the P (PARK) position.
• Push the ignition switch to the ON position.
• Adjust the driver’s seat, steering column and
outside mirrors to the desired positions using the adjusting switches fo\
r each feature.
• Push the SET switch and within 5 seconds push the memory switch (1 or 2) for at least 1 second.
• The indicator light on the memory switch you select will illuminate for \
approximately 5 seconds.
• The driver’s seat, steering column and outside mirror positions are n\
ow set to your preferences.

These memorized positions can also be linked to your INFINITI Intelligen\
t Key. To link a
memorized position to your INFINITI Intelligent Key, press the unlock bu\
tton on the key
fob after completing the previous step.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
Outside Mirror Control Switch
To select the right or left side mirror, move the control
switch
1 right or left.

To adjust each mirror to the desired position, use the
control switch

2.

To fold the outside rearview mirrors, push the switch 3
to the CLOSE position, and to unfold the outside rearview
mirrors, push the switch
3 to the OPEN position.
REVERSE TILT-DOWN FEATURE (if so equipped)

When backing up the vehicle, the right or left outside
mirror can be selected to turn downward to provide better rear visibilit\
y.
1. Push the ignition switch to the ON position.
2. Move the shift lever to the R (REVERSE) position.
3. Choose the right or left outside mirror by operating the outside mirr\
or control switch

1.
4. The selected outside mirror surface moves downward.

The control switch
1 must be in the right or left position for the reverse tilt-down feature \
to function.

When one of the following conditions has occurred, the outside mirror su\
rface will return to
its original position:
• The shift lever is moved to any position other than R (REVERSE).
• The outside mirror control switch is set to the center (neutral) posit\
ion.
• The ignition switch is pushed to the OFF position.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
1
2
3
1807402_15b_Infiniti_QX70_QRG_100114.indd 810/1/14 4:18 PM