catalytic converter ISUZU TF SERIES 2004 Owner's Guide

6F-10 ENGINE EXHAUST
3 WAY CATALYTIC CONVERTER
SYSTEM (If applicable)

N2



Inspection
Make the necessary adjustments, and part replacements if
excessive or damage is discovered during inspection.

Exhaust Pipe Assembly
1. Check connections for looseness or damage.
2. Check clamps for weakness, crack, or damage.


Catalytic Converter
Check for dents or damage.
If any part of the converter is damaged or dented, repair or
replace it.


Removal
1. Jack up the vehicle.
2. Check that the converter is cool.
3. Remove the bolts at the front and rear of the converter.
4. Remove the converter and gaskets.

6F-14 ENGINE EXHAUST
Main Data and Specifications

Exhaust system
Pipe outside diameter ✕ thickness
Front pipe mm(in) 44.5 ✕ 1.5 (1.75✕0.059)
Middle pipe mm(in) 50.8 ✕ 1.5 (2.00 ✕ 0.059)
Rear pipe mm(in) 50.8 ✕ 1.5 (2.0 ✕ 0.059)

Silencer
Type Circular section-shell construction
of triple; double skin and end plates, internal
construction of baffles
and perforated tubes.

Number of suspension points
Type
Catalytic converter type (If applicable) 4
Rubber
Three way Catalytic Converter