brake pads ISUZU TF SERIES 2004 Workshop Manual

ISUZU TF SERIES 2004 Workshop Manual TF SERIES 2004 ISUZU ISUZU https://www.carmanualsonline.info/img/61/57180/w960_57180-0.png ISUZU TF SERIES 2004 Workshop Manual

Page 271 of 4264

ISUZU TF SERIES 2004  Workshop Manual FRONT WHEEL DRIVE  4C1-51 
 
Important Operations 
6.  Hub nut  
Wrench : 5-8840-2117-0 
(J-36827) 
 
 
 
 7.  Hub and disc assembly 
Before disassembly, remove the disc brake caliper assembly 
and ha

Page 279 of 4264

ISUZU TF SERIES 2004  Workshop Manual FRONT WHEEL DRIVE  4C1-59 
  
 
 12. Bolt 
13. Wheel Pin ; Front Hub 
(1) Scribe mark on hub to disc before disassembly to insure
proper assembly. 
(2) Drive out the ABS sensor rotor using a metal bar

Page 463 of 4264

ISUZU TF SERIES 2004  Workshop Manual BRAKES  5C-37
 
   REMOVAL AND INSTALLATION OF DISC PAD 
 
 
   
 
Removal Steps 
1. Lock Bolt 
Remove the lock bolt from the caliper. 
Note: 
Dont remove the brake hose from caliper when replacing

Page 467 of 4264

ISUZU TF SERIES 2004  Workshop Manual BRAKES  5C-41 
 
   
 
 
 
 
 
 
 
 
 
Thickness of Disc Pad 
Thickness (t)  mm(in)
 
Standard Limit 
10.0 (0.394)  1.8 (0.071) 
 
Replace the front disc pad whenever the pad wear indicator 
makes a s

Page 2992 of 4264

ISUZU TF SERIES 2004  Workshop Manual 0B-4  MAINTENANCE AND LUBRICATION 


I : Inspect and correct or replace as necessary     A : Adjust 
R : Replace or change     T : Tighten to specified torque    L : Lubricate 
 SERVICE INTERVAL: 

Page 2995 of 4264

ISUZU TF SERIES 2004  Workshop Manual MAINTENANCE AND LUBRICATION  0B-7 


I : Inspect and correct or replace as necessary     A : Adjust 
R : Replace or change     T : Tighten to specified torque    L : Lubricate 
 SERVICE INTERVAL:  

Page 2998 of 4264

ISUZU TF SERIES 2004  Workshop Manual 0B-10  MAINTENANCE AND LUBRICATION 


I : Inspect and correct or replace as necessary     A : Adjust 
R : Replace or change     T : Tighten to specified torque    L : Lubricate 
 SERVICE INTERVAL:

Page 2999 of 4264

ISUZU TF SERIES 2004  Workshop Manual MAINTENANCE AND LUBRICATION  0B-11 
SEVERE CONDITIONS MAINTENANCE SCHEDULE (For GENERAL EXPORT) 
    
Severe driving conditions   
A :  Repeated short trips 
G : Gasoline engine 
B :  Driving on rough

Page 3000 of 4264

ISUZU TF SERIES 2004  Workshop Manual 0B-12  MAINTENANCE AND LUBRICATION 
SEVERE CONDITIONS MAINTENANCE SCHEDULE (For EUROPE) 

Severe driving conditions 
4JA1-TC  : 4JA1-TC Diesel engine 
A: Repeated short trips 
4JH  : 4JH1-TC Diesel e