ignition JEEP COMMANDER 2008 1.G Repair Manual

JEEP COMMANDER 2008 1.G Repair Manual COMMANDER 2008 1.G JEEP JEEP https://www.carmanualsonline.info/img/16/7064/w960_7064-0.png JEEP COMMANDER 2008 1.G Repair Manual

Page 221 of 478

JEEP COMMANDER 2008 1.G Repair Manual NOTE:The ignition switch must be in the ON or ACC
position to operate the radio.
LOAD Button Ð Loading Compact Disc(s)
Press the LOAD button and the push-button with the
corresponding number (1-6) wh

Page 227 of 478

JEEP COMMANDER 2008 1.G Repair Manual Macrovision
This product incorporates copyright protection technol-
ogy that is protected by U.S. patents and other intellec-
tual property rights. Use of this copyright protection
technology must be

Page 233 of 478

JEEP COMMANDER 2008 1.G Repair Manual stations to be stored into push-button memory. The
stations stored in SET 2 memory can be selected by
pressing the push-button twice.
Every time a preset button is used, a corresponding
button number

Page 234 of 478

JEEP COMMANDER 2008 1.G Repair Manual CAUTION!
²This CD player will accept 4 3/4 inch (12 cm) discs
only. The use of other sized discs may damage the
CD player mechanism.
²Do not use adhesive labels. These labels can peel
away and jam t

Page 239 of 478

JEEP COMMANDER 2008 1.G Repair Manual TIME Button (Auxiliary Mode)
Press this button to change the display to time of day. The
time of day will display for 5 seconds (when ignition is
off).
Operating Instructions - Hands Free Phone
(UConn

Page 243 of 478

JEEP COMMANDER 2008 1.G Repair Manual Operating Instructions Ð Satellite Radio
Refer to your ªNavigation Users Manualº for detailed
operating instructions.
Clock Setting Procedure
The GPS receiver used in this system is synchronized t

Page 249 of 478

JEEP COMMANDER 2008 1.G Repair Manual SATELLITE RADIO (RSC) Ð IF EQUIPPED (REQ
AND RES RADIOS ONLY)
Satellite radio uses direct satellite to receiver broadcast-
ing technology to provide clear digital sound, coast to
coast. The subscript

Page 250 of 478

JEEP COMMANDER 2008 1.G Repair Manual selected. Press the TUNE control knob and the Sirius ID
number will display. The Sirius ID number display will
time out in 2 minutes. Press any button on the radio to
exit this screen.
Selecting Satel

Page 258 of 478

JEEP COMMANDER 2008 1.G Repair Manual Blower Control
The rotary knob on the left controls the
blower and can be set in one of four
speeds and OFF.The blower fan mo-
tor will remain on until the system is
turned to the OFF position or the

Page 277 of 478

JEEP COMMANDER 2008 1.G Repair Manual STARTING PROCEDURES
Before starting your vehicle, adjust your seat, adjust the
inside and outside mirrors, fasten your seat belt, and if
present, instruct all other occupants to buckle their seat
belt