Trailer and Tongue Weight............... 341
Wiring.............................. 345
Trailer Towing Guide..................... 340
Trailer Weight.......................... 340
Transaxle............................. 260
Automatic....................12,256,260,386
Autostick............................ 264
Manual........................14,256,258
Operation........................... 260
Overdrive........................... 264
Selection of Lubricant................... 386
Transmitter Battery Service
(Remote Keyless Entry).................... 25
Transmitter, Garage Door Opener (HomeLink) . . 136
Transmitter Programming
(Remote Keyless Entry).................... 24
Transporting Pets........................ 68
Tread Wear Indicators.................... 315
Trip Odometer.......................... 175Trip Odometer Reset Button................ 173
Turn Signals......................126,168,400
UCI Connector......................... 229
UConnect(Hands-Free Phone).............. 81
Understanding Your Instrument Panel......... 165
Uniform Tire Quality Grades................ 432
Universal Consumer Interface (UCI) Connector . . . 229
Universal Transmitter..................... 136
Unleaded Gasoline....................... 328
Vanity Mirrors........................... 80
Variance, Compass....................... 186
Vehicle Certification Label................. 335
Vehicle Identification Number (VIN)............ 7
Vehicle Loading...................305,335,336
Vehicle Modifications/Alterations.............. 8
Vehicle Storage......................... 397
Vehicle Theft Alarm (Security Alarm).......... 19
INDEX 451
10
INSTALLATION OF RADIO TRANSMITTING
EQUIPMENT
Special design considerations are incorporated into this
vehicle’s electronic system to provide immunity to radio
frequency signals. Mobile two-way radios and telephone
equipment must be installed properly by trained person-
nel. The following must be observed during installation.
The positive power connection should be made directly
to the battery and fused as close to the battery as possible.
The negative power connection should be made to body
sheet metal adjacent to the negative battery connection.
This connection should not be fused.
Antennas for two-way radios should be mounted on the
roof or the rear area of the vehicle. Care should be used
in mounting antennas with magnet bases. Magnets may
affect the accuracy or operation of the compass on
vehicles so equipped. The antenna cable should be as short as practical and
routed away from the vehicle wiring when possible. Use
only fully shielded coaxial cable.
Carefully match the antenna and cable to the radio to
ensure a low Standing Wave Ratio (SWR).
Mobile radio equipment with output power greater than
normal may require special precautions.
All installations should be checked for possible interfer-
ence between the communications equipment and the
vehicle’s electronic systems.
