stop start KIA CADENZA 2016 Features and Functions Guide

VIDEOS & QR CODES 02
INSTRUMENT CLUSTER Instrument Cluster Overview 03
Indicators & Warning Lights 04
Tire Pressure Monitoring System (TPMS) 05
Fuel Economy 05
LCD Instrument Cluster Modes 06
Trip Computer / Tripmeter 06
User Settings 07
Service Mode 07
DRIVER’S PANEL Electronic Stability Control (ESC) 08
Hill-Start Assist Control (HAC) 08
Blind Spot Detection (BSD) System* 09
Lane Departure Warning System (LDWS)* 10
Instrument Panel Dimmer 10
Power Windows, Window Lock & Central Door Lock 11
Power Folding Outside Mirrors* 11
Heated Outside Mirrors 11
Automatic Door Lock /Unlock 11
Reverse Parking Aid Function* 12
Fuel Door and Trunk Release Buttons 12
Engine Start/Stop Button 13
STEERING WHEEL CONTROLS Manual Tilt/ Telescoping Steering Wheel* 14
Power Tilt/ Telescoping Steering Wheel* 14
Headlights & High Beams 15
Turn Signals & Fog Lights 16
Windshield Wipers & Washers 17
Bluetooth
® Wireless Technology 18
Advanced Smart Cruise Control (ASCC)* 20
Audio Controls 21
Cruise Control* 21CENTER PANEL
UVO eServices with Navigation* 22
Surround View Monitor (SVM)* 23
Clock 24
Aux/USB/iPod
® Port & Power Outlets 24
Automatic Climate Control 25
Automatic Gear Shift / Sportmatic
® Shifting 26
Paddle Shifters* 26
Electric Parking Brake* 27
Auto Hold* 27
Heated Steering Wheel* 28
Power Rear Sunshade* 28
Seat Warmers / Ventilated Seats* 29
S E AT I N G Power Adjustable Driver’s Seat 30
Front Seat Headrest Adjustment 31
Driver Position Memory System* 31
OTHER KEY FEATURES Smart Key 32
HomeLink
® with Auto-Dimming Rearview Mirror 33
Map/Room Lamps 34
Panoramic Sunroof Operation* 35
Sunvisor 35
Rear-Camera Display 36
Back-Up Warning System (Rear Parking Assist System)* 36
Trunk Release Button 37
Fuel Cap / Malfunction Indicator (Check Engine Light) 37
Child Safety Locks 37
Hood Release Lever and Latch 38
SAFETY FEATURES Occupant Detection System (ODS) /
Passenger Airbag Off Indicator 39
Seat Belts 40
Seat Belt Retractor Locks 40
NORMAL MAINTENANCE SCHEDULE 41
LEGAL DISCLAIMERS
(See Back Inside Cover Page)
ESSENTIAL FEATURES
CADENZA FE ATURES & FUNCTIONS GUIDE
Air Conditioning / Automatic Climate Control 25
Audio System – UVO eServices with Navigation* 22
Aux/USB/iPod
®* Port* & Power Outlets* 24
Bluetooth
® Wireless Technology 18
Cruise Control* 21
Clock 24
Passenger Airbag Off Indicator 39
Service Mode 07
Smart Key 32
Tire Pressure Monitoring System (TPMS) 05
Trip Computer / Tripmeter 06
User Settings 07
Windshield Wipers & Washers 17
*IF EQUIPPED
Driving while distracted can result in a loss of vehicle control
that may lead to an accident, severe personal injury and death.
The driver’s primary responsibility is in the safe and legal
operation of a vehicle, and use of any handheld devices, other
equipment or vehicle systems which take the driver’s eyes,
attention and focus away from the safe operation of a vehicle
or that are not permissible by law should never be used during
operation of the vehicle.

6
Trip Computer / Tripmeter
The Trip Computer is a driver information
system that displays information related
to driving on the display when the ENGINE
START/STOP button is in the ON position
To cycle through the LCD Instrument
Cluster modes, press the Mode/Select
button
A
When in the Trip Computer mode
,
press the Move/Reset button B to cycle
through the screens When displaying
TRIP A or TRIP B screens, press and hold
the Move/Reset button
B to reset the
Tripmeter to zero
REMINDERS:

• Appearance of Tripmeter display may differ
as equipped

• All stored driving information (except Odometer
and Range) is reset if the battery is disconnected
(Type B Cluster)
025
50: NextHold : Reset
AVGRANGE
444
44.4
mi.
MPG
ODO1 2 3
4 5
6 mi.
- 3 2 °F
FUEL ECONOMY
• R ANGE
• Average MPG
• Instant MPG
TRIP A
• Tripmeter A
• Average MPH
• Elapsed Time (E / T )
TRIP B
• Tripmeter B
• Average MPH
• Elapsed Time (E / T )
LCD Instrument Cluster Modes*
Press Mode/Select button A to scroll through different LCD Instrument
Cluster Modes:
(Buttons located
on Steering Wheel)
Ty p e A Ty p e B
Trip Computer Mode: Displays driving information
for tripmeter, fuel economy, etc
Advanced Smart Cruise Control (ASCC) / Lane
Departure Warning System (LDWS)*: Displays the
state of the ASCC and LDWS
A/V Mode: Displays the state of the A / V System
Turn-by-Turn Mode*: Displays the state of the
Navigation system
Information Modes: Informs on service intervals and
pressure status of each tire
User Settings Mode: Change settings of the doors,
lamps and other features
A
B
Your vehicle’s steering wheel buttons may differ from those in the illustrations.
CADENZA FEATURES & FUNCTIONS GUIDE
*IF EQUIPPED
INSTRUMENT CLUSTER

7
User Settings
To enter the User Settings
mode in the LCD Instrument
Cluster Modes, press the
Mode/Select button
A when
the vehicle is at a standstill
and with the ENGINE START/
STOP button in the ON
position and select User
Settings

You can navigate the selections on the display by pressing the
Move/Reset button
B, and then selecting the item by pressing
the Mode/Select button A
Door:
• Auto Door Lock
& Unlock
• Two Press Unlock
• Lock /Unlock Sound
• Horn Feedback

Lamp:
• One-Touch Turn
Lamp
• Headlamp Delay
• Welcome Light* Settings:
•
Temperature Unit
• Speed Unit ( Type B Cluster)*
• Speedometer Size ( Type
B Cluster)*
• AVG Fuel Economy Reset
• Easy Seat Access*
• Easy Steering Access*
• Welcome Sound
• Steering Position

Service Interval:
• ON/OFF
• Set mileage/months
Service Mode
To enter Service Mode, press the Mode/Select
button A, scroll to Service Mode by pressing Move/
Reset button B Then press the Mode/Select button A to
enter System will display number of miles remaining until
next service is due, and type of service
When service is required, the following will be displayed:
Service Required
To reset the Service Mode system, press and hold the
Move/Reset button
B for more than 1 second
To turn Service In OFF, go to User Settings
Service Interval Setting
To set the service interval when in
User Settings mode:
• Press the Move/Reset button
B and scroll to Service
Interval Press the Mode/Select
button
A to enter
• Press the Move/Reset button
B and toggle to ON, then
press the Move/Select button
A Then press the Move/Reset
button B to scroll and select
the desired miles or months for
your next service
• Press the Mode/Select button
A to enter


To view these videos on
your mobile device, snap
these QR Codes or visit the
listed websites
Refer to page 2 for more
information
LCD Display Video


LCD Display:
Maintenance VideoQR CODES
www. KuTechVideo s.c om/vg13/2016
www. KuTechVideo s.c om/vg13/2016ODO 123 456 miHold : Reset
Service in
or 15000 mi.
90 days
ODO 123 456 mi
Service in
OFF
ODO 123 456 miHold : Reset
Service required
or 0 mi.
0 days
ODO 123 456 miHold : Reset
Service in
or 15000 mi.
90 days
ODO 123 456 mi
Service in
OFF
ODO 123 456 miHold : Reset
Service required
or 0 mi.
0 days
ODO 123 456 miHold : Reset
Service in
or 15000 mi.
90 days
ODO 123 456 mi
Service in
OFF
ODO 123 456 miHold : Reset
Service required
or 0 mi.
0 days
(Type B cluster)
(Buttons located on right side of
steering wheel)
A
B
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS. *IF EQUIPPED
INSTRUMENT CLUSTER

8
Electronic Stability Control (ESC)
The ESC system is designed to help stabilize the vehicle during cornering
maneuvers It is a good idea to keep the ESC turned on for daily driving
whenever possible
Press ESC button
A to turn Traction Control OFF/ON
To turn OFF both the Traction Control and Stability Control, press and hold for
more than 3 seconds Press again to turn ON
(Button panel located left of Steering Wheel)
Hill-Start Assist Control (HAC)
HAC helps prevent the vehicle from rolling backwards when accelerating
from a stop while on a steep incline The HAC automatically activates
whether the ESC is OFF or ON but does NOT activate when the ESC
has malfunctioned
REMINDER: The HAC does not operate when the gear shift is in the P (Park) or the N
(Neutral) position

REMINDERS:

•ESC is active by default at vehicle start-up When ignition is cycled, ESC will turn ON again

• The ESC Indicator Light in the instrument cluster will illuminate whenever the ESC is
in operation
For more information on Electronic Stability Control (ESC) and its specific features and
operations, please refer to your Owner’s Manual.


When HAC is active (e g , during initial acceleration from a stop on an incline),
you may notice that the brakes will momentarily remain engaged after you
depress the accelerator QUICK TIP
A
CADENZA FEATURES & FUNCTIONS GUIDE
*IF EQUIPPED
DRIVER'S PANEL

10


Lane Departure
Warning Video

To view a video on your
mobile device, snap this
QR Code or visit the listed
website
Refer to page 2 for more
information QR CODE
www. KuTechVideo s.c om/vg13/2016
Lane Departure Warning System (LDWS)*
With the ENGINE START/STOP button in the ON position, press
the LDWS button C to turn system ON The instrument cluster
indicator
will illuminate green LDWS will stay on when the
ignition is cycled
If the LDWS detects that you are veering outside of your lane,
the system may issue a warning on the LCD screen and an alert
may sound, under these conditions:
• The vehicle exceeds approximately 43 mph

• The LDWS system recognizes the lane the vehicle is
traveling in
REMINDER: LDWS will not issue a warning if the turn signal is activated
The Lane Departure Warning System (LDWS) is not a substitute for safe and
proper driving. Always drive safely and use caution. LDWS may not always alert
the driver if the vehicle is driven outside of it’s lane.
ODO 123456 mi
LDWS
ODO 123456 mi
LDWS
ODO 123456 mi
LDWS
ODO 123456 mi
LDWS
ODO 123456 mi
LDWS
ODO 123456 mi
LDWS
ODO 123456 mi
LDWS
ODO 123456 mi
LDWS
ODO 123456 mi
LDWS
ODO 123456 mi
LDWS
ODO 123456 mi
LDWS
ODO 123456 mi
LDWS
ODO 123456 mi
LDWS
ODO 123456 mi
LDWS
ODO 123456 mi
LDWS
ODO 123456 mi
LDWS
Instrument Panel Dimmer
With parking lights/headlights ON, press button D (+) or (-)
to adjust the brightness of the instrument panel illumination

REMINDER: The Instrument Panel Dimmer does not adjust brightness on the
Navigation System screen, use Navigation setup to adjust brightness on the
Navigation System
(Button panel located left of Steering Wheel)
D
C
When the LDWS sensor detects
the lane traveling inWhen the LDWS sensor does not
detect the lane traveling in
When the LDWS sensor detects the vehicle veering outside of the lane traveling
in, a yellow indicator will illuminate
CADENZA FEATURES & FUNCTIONS GUIDE
*IF EQUIPPED
DRIVER'S PANEL

12
Fuel Door and Trunk Release Buttons
Press the C button to release the fuel door
Press the
D button to open the trunk
Reverse Parking Aid Function*
When the gear shift lever is moved into R (Reverse) and while the vehicle is
moving backwards, the outside rearview mirrors A will rotate downward to
aid in reverse parking
To turn ON the Reverse Parking Aid Function, the outside mirror switch
B
needs to be in the left or right position
To turn OFF, place outside mirror switch in the center position.
The outside rearview mirrors will automatically return to their original
positions when:
• The ENGINE START/STOP Button is in the OFF position
• The gear shift lever is moved to any position except R (Reverse)
• Outside rearview mirror switch is in the middle position
REMINDER: When the outside rearview mirror switch B is in the middle position, the Reverse
Parking Aid Function will not operate and the outside rearview mirrors will not rotate downward
(Buttons panel located on Driver's Door ) (Buttons located left of Steering Wheel)
A
B
CD
CADENZA FEATURES & FUNCTIONS GUIDE
*IF EQUIPPED
DRIVER'S PANEL

13
Engine Start/Stop Button
To start the engine:
1 Depress the brake pedal
2 Press the ENGINE START/STOP button while in Park or Neutral

To turn the engine OFF, press the ENGINE START/STOP button
To use the ENGINE START/STOP button, you must have the Smart Key fob on
your person
REMINDERS:

• In an emergency situation while the vehicle is in motion, you are able to turn the engine off and to
the ACC position by pressing the ENGINE START/STOP button for more than 2 seconds or 3 times
successively within 3 seconds

• If Smart Key fob battery is dead, with the lock button facing the ENGINE START/STOP button, hold
the fob up against the ENGINE START/STOP button and press


Engine Start/Stop Button
& Smart Key Video

To view a video on your
mobile device, snap this
QR Code or visit the listed
website
Refer to page 2 for more
information QR CODE
www. KuTechVideo s.c om/vg13/2016
ENGINESTART
STOP


To use electrical accessories:
ACC position

•When in the OFF position and without depressing the brake pedal, press the ENGINE START/STOP button once (orange light A)
ON position

•When already in the ACC position (orange light A) and without depressing the brake pedal, press the ENGINE START/STOP button again
(red light B)
• When in the OFF position and without depressing the brake pedal, press the ENGINE START/STOP button twice (red light B)
Keeping the vehicle in ACC or the ON position for extended periods of time without turning engine on may discharge the
vehicle’s battery.
QUICK TIPS
A
B
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS. *IF EQUIPPED
DRIVER'S PANEL

17
M I S T: Single wipe
OFF: Wiper off
AUTO: Auto Control* wipe
LO: Slow wipe
HI: Fast wipe
Windshield Wipers & Washers
To o p e r a t e :
• Move lever Up/Down to change Wiper modes
• Pull lever to spray and wipe
Auto Control (Rain Sensing)*
The rain sensor located on the upper end of the windshield
glass senses the amount of rainfall and controls the wiping
cycle for the proper interval The more it rains, the faster the
wiper operates When the rain stops, the wiper stops
To adjust the Auto Rain Sensing speed setting, move the
speed control switch
A up/down


•With the ENGINE START/STOP button in the ON position and
the wiper switch is in AUTO mode, the wiper will operate once
to perform a self-check of the system

•Moving lever to HI increases Intermittent wipe frequency and
wipe speed Moving lever to LO decreases frequency of wipes

•Set the wiper to OFF position when the wiper is not in use
QUICK TIPS
A
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS. *IF EQUIPPED
STEERING WHEEL CONTROLS

23
Surround View Monitor (SVM)*
The Surround View Monitor (SVM) system is a parking support system that shows the areas around the front, rear, left, and
right sides of the vehicle via four cameras displayed onto the navigation screen The SVM system will turn on when the SVM
button
A is pressed and the LED is illuminated


Surround View
Monitor Video

To view a video on your
mobile device, snap this
QR Code or visit the listed
website
Refer to page 2 for more
information QR CODE
www. KuTechVideo s.c om/vg13/2016
Front SVM - when in Drive & Neutral: Rear SVM - when in Reverse:
Displays the front side and SVM images
simultaneously on the screen
Displays the front side image on the
screen
Displays the front side and left side
images simultaneously on the screen
Displays the front side and right side
images simultaneously on the screen
Displays the rear view and SVM images
simultaneously on the screen
Displays the rear side image on the
screen
Displays the rear and left side images
simultaneously on the screen
Displays the rear and right side images
simultaneously on the screen
REMINDER: The SVM camera is
equipped with an optical lens to
provide a wider range of vision and
may appear different from the
actual distance
The Surround View Monitor system
is only a supplemental device.
Drivers should not rely solely on the
SVM information when parking and
backing up. Drivers should always
pay attention and directly check the
left/right and rear.

• The Front SVM camera is ON when the ENGINE START/STOP
button is On, the gear shift is in Drive or Neutral and the SVM
button is pressed ON

• Rear SVM: The camera view will automatically display on the
navigation screen when the vehicle is shifted into Reverse
The camera view will turn off when the vehicle is shifted out
of Reverse

• Front SVM: The camera view will display on the navigation
screen in both Drive and Neutral In Drive, the camera
view will continue to display until the vehicle is above
approximately 12 mph The camera view will reappear on
the navigation screen whenever the vehicle drops below
approximately 12 mph
Camera View Modes – To change camera view modes, press the icons shown below on the navigation screen to select the mode


The Front SVM camera will turn off when the gear shift is
moved into Park or Reverse or the SVM button is pressed QUICK TIP
Check yo ur sur roun dings for safety.
(Button located on gear shift)
A
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS. *IF EQUIPPED
CENTER PANEL

24
REMINDER: Using the power outlet (accessory plug) for
prolonged periods of time with the ENGINE START/STOP
button in the ACC position (Engine OFF ) could cause the
battery to discharge
For more information on the Aux/USB/iPod
® Port & Power
Outlets, refer to the Owner's Manual.
Aux/USB/iPod® Port
& Power Outlets
Clock

USB Port Video


To view a video on your
mobile device, snap this
QR Code or visit the listed
website
Refer to page 2 for more
information QR CODE
www. KuTechVideo s.c om/vg13/2016
Center Panel Clock Setup:
Clock setup is done through the UVO eServices with Navigation
system See below or refer to the Car Multimedia System User's
Manual for more information
UVO eServices with Navigation* Clock Setup:
Press the Info/Settings key
on the audio control unit Then
press the on-screen Setup button and select the Clock icon Use the
on-screen buttons to navigate through setup
CLIM AT E
MODEACPASS
AIR BAG
OFF
AUTOFRONT
REAR
OFF
DUAL
AUX USB
If equipped, additional power outlets are
located inside the center console



Press the DONE button on the navigation screen to ensure changes
are saved QUICK TIP


The power outlets are inactive when the ENGINE
START/STOP button is OFF QUICK TIP
CADENZA FEATURES & FUNCTIONS GUIDE
*IF EQUIPPED
CENTER PANEL