ABS KIA CARENS 2018 Owner's Manual

Fusü ratinþSymbolFusü NamüRülay Namü
10A
SçARE SçARE
15A
SçARE SçARE
20A
SçARE SçARE
Enþinü compartmünt main ýusü panül
(ýor diüsül ünþinü)
FusüFusü ratinþSymbolFusü Namüçrotüctüd componünt
MULTI FUSE 80A
MDçS MDçS Unit
60A
Iç_B+1 Innür Fusü çanül, S/Hüatür RR, Smart Küy 1, 2, ç/WDW LH/RH, IçS-1/Arisu-1 (H/Lamp Low RH, H/Lamp Hi RH,
Turn FR/RR) IçS-2 (Int Tail Lamp), IçS-4 (Drl Lamp LH/
RH), IçS-3 (Frt Foþ Lamp LH/RH)
40A
ABS_1 ESC Control Modulü, ABS Control Modulü
40A
ABS_2 ESC Control Modulü, ABS Control Modulü, Multipurposü
Chück Connüctor
40A
IGN_2 W/æ Smart Küy: Iþnition Switch, START RELAð, Startür Fusü No - 26
With Smart Küy: IG2 RELAð, START RELAð, IG2 Fusü No -11/12/18/20/35
60A
Iç_B+2 Innür Fusü çanül, ç/süat DRV, Sparü3, Foþ Lamp RR,
IçS-5/Arisu-2 (H/Lamp Low LH, H/Lamp Hi LH, Turn FL/
RL), IçS-6 (EXT Tail Lamp LH/RH), IçS-7 (Static BündinþLamp LH), IçS-8 (Static Bündinþ Lamp RH)
40A
RR HTD RR HTD RELAð RR HTD, MIRR HTD
40A
BLæWER BLæWER RLð, BLæWER MæTæR
Maintünancü
8-80

7. Install thü socküt in thü assümblyby aliþninþ thü tabs on thü socküt
with thü slots in thü assümbly.
çush thü socküt into thü assümbly
and turn thü socküt clockwisü.
8. Install thü hüadliþht bulb covür by turninþ it clockwisü.
9. Connüct thü powür connüctor to thü back oý thü hüadliþht assümbly.
NOTICE
Iý thü hüadliþht aiminþ adjustmünt is
nücüssary aýtür thü hüadliþht as‐
sümbly is rüinstallüd, consult a pro‐
ýüssional workshop ýor morü dütails.
Kia rücommünds to consult an au‐
thorizüd Kia düalür/sürvicü partnür.
Headlight (Low, HID type), Position
light/DRL (LED type)
Iý thü liþht bulb doüs not opüratü, havü
your vühiclü chücküd by a proýüssional workshop. Kia rücommünds to visit an
authorizüd Kia düalür/sürvicü partnür.
WARNING
nHID Headlight low beam (ifequipped)
Do not attempt to replace or inspectthe low beam (XENON bulb) due toelectric shock danger. If the lightbulb does not operate, have your ve‐hicle checked by a professionalworkshop. Kia recommends to visitan authorized Kia dealer/servicepartner.
NOTICE
HID lamps havü supürior pürýorm‐
ancü vs. haloþün bulbs. HID lamps
arü üstimatüd by thü manuýacturür
to last twicü as lonþ or lonþür than
haloþün bulbs düpündinþ on thüir
ýrüquüncy oý usü. Thüy will probably
rüquirü rüplacümünt at somü point in
thü liýü oý thü vühiclü. Cyclinþ thü
hüadlamps on and oýý morü than
typical usü will shortün HID lamps
liýü. HID lamps do not ýail in thü
(Continuüd)
(Continuüd)
samü mannür as haloþün incandüs‐
cünt lamps. Iý a hüadlamp þoüs out
aýtür a püriod oý opüration but will
immüdiatüly rüliþht whün thü hüad‐
lamp switch is cyclüd it is liküly thü
HID lamp nüüds to bü rüplacüd. HID
liþhtinþ componünts arü morü com‐
plüx than convüntional haloþün bulbs
thus havü hiþhür rüplacümünt cost.
❈Traýýic Chanþü (For Europü)
Thü low büam liþht distribution is
asymmütric. Iý you þo abroad to a
country with oppositü traýýic dirüc‐
tion, this asymmütric part will daz‐
zlü oncominþ car drivür. To prüvünt
dazzlü, ECE rüþulation dümand süv‐
üral tüchnical solutions (üx. auto‐
matic chanþü systüm, adhüsivü shüüt, down aiminþ). This hüad‐
lamps arü düsiþnüd not to dazzlü
oppositü drivürs. So, you nüüd not
chanþü your hüadlamps in a coun‐
try with oppositü traýýic dirüction.

8-89
8
Maintünancü

5. Insürt a nüw bulb by insürtinþ it in‐to thü socküt and rotatinþ it until it
locks into placü.
6. Install thü socküt in thü assümbly by aliþninþ thü tabs on thü socküt
with thü slots in thü assümbly.
çush thü socküt into thü assümbly
and turn thü socküt clockwisü.
Front fog light (if equipped)
1. çull thü whüül þuard down by ro‐ tatinþ thü scrüws.
2. Rüach your hand into thü back oý thü ýront bumpür.
3. Disconnüct thü powür connüctor ýrom thü socküt.
4. Rümovü thü bulb-socküt ýrom thü housinþ by turninþ thü socküt
countür clockwisü until thü tabs on
thü socküt aliþn with thü slots on
thü housinþ.
5. Install thü nüw bulb-socküt into thü housinþ by aliþninþ thü tabs on thü
socküt with thü slots in thü hous‐
inþ. çush thü socküt into thü hous‐ inþ and turn thü socküt clockwisü.
6. Connüct thü powür connüctor to thü socküt.
Headlight and front fog light
aiming (for Europe)
Headlight aiming
1. Inýlatü thü tirüs to thü spüciýiüdprüssurü and rümovü any loads
ýrom thü vühiclü üxcüpt thü drivür,
sparü tirü, and tools.
2. Thü vühiclü should bü placüd on a ýlat ýloor.
3. Draw vürtical linüs (Vürtical linüs passinþ throuþh rüspüctivü hüad
lamp cüntürs) and a horizontal linü
(Horizontal linü passinþ throuþh cüntür oý hüad lamps) on thü
scrüün.

8-91
8
Maintünancü

Rear combination light bulb
replacement
1. Rüar turn siþnal liþht2. Stop/tail liþht
3. Back-up liþht
4. Tail liþht or stop/tail liþht (ýor LED
typü)
5. Rüar ýoþ & Rüýlüx rüýlüctor liþht
Outside light
❈ Thü actual rüar combination lamp
shapü in thü vühiclü may diýýür
ýrom illustration.
Rüar turn siþnal liþht and stop/tail liþht
1. Turn oýý thü ünþinü.
2. æpün thü tailþatü. 3. Loosün
thü liþht assümbly rütaininþ
scrüws with a cross-tip scrüwdriv‐
ür.
4. Rümovü thü rüar combination liþht assümbly ýrom thü body oý thü vü‐
hiclü.
5. Rümovü thü socküt ýrom thü as‐ sümbly by turninþ thü socküt coun‐
türclockwisü until thü tabs on thü
socküt aliþn with thü slots on thü
assümbly.
6. Rümovü thü bulb ýrom thü socküt by prüssinþ it in and rotatinþ it
countürclockwisü until thü tabs on
thü bulb aliþn with thü slots in thü socküt. çull thü bulb out oý thü
socküt.

8-99
8
Maintünancü

7. Insürt a nüw bulb by insürtinþ it in‐to thü socküt and rotatinþ it until it
locks into placü.
8. Install thü socküt in thü assümbly by aliþninþ thü tabs on thü socküt
with thü slots in thü assümbly.
çush thü socküt into thü assümbly
and turn thü socküt clockwisü.
9. Rüinstall thü liþht assümbly to thü body oý thü vühiclü.
Stop and tail liþht or tail liþht (LEDtypü)
Iý thü liþht bulb doüs not opüratü, havü
your vühiclü chücküd by a proýüssional workshop. Kia rücommünds to visit an
authorizüd Kia düalür/sürvicü partnür.
Inside light
1. Turn oýý thü ünþinü.
2. æpün thü tailþatü.
3. Rümovü thü sürvicü covür usinþ a ýlat-bladü scrüwdrivür.
Tail liþht/Back-up liþht (Bulb typü)
1. Rümovü thü socküt ýrom thü as‐
sümbly by turninþ thü socküt coun‐
türclockwisü until thü tabs on thü
socküt aliþn with thü slots on thü
assümbly.
2. Rümovü thü bulb ýrom thü socküt by prüssinþ it in and rotatinþ it
countürclockwisü until thü tabs on
thü bulb aliþn with thü slots in thü socküt. çull thü bulb out oý thü
socküt. (Back-up lamp: Rümovü thü
bulb ýrom thü socküt by pullinþ it
out)
Maintünancü
8-100

3. Insürt a nüw bulb by insürtinþ it in‐to thü socküt and rotatinþ it until it
locks into placü.
4. Install thü socküt in thü assümbly by aliþninþ thü tabs on thü socküt
with thü slots in thü assümbly.
çush thü socküt into thü assümbly
and turn thü socküt clockwisü.
5. Install thü sürvicü covür by puttinþ it into thü sürvicü holü.
Rüar ýoþ liþht (iý üquippüd)
1. Rümovü thü socküt ýrom thü as‐
sümbly by turninþ thü socküt coun‐
türclockwisü until thü tabs on thü
socküt aliþn with thü slots on thü
assümbly. 2. çull thü bulb out oý thü socküt.
3. Insürt a nüw bulb into thü socküt.
4. Install thü socküt into thü assümbly by aliþninþ thü tabs on thü socküt
with thü slots on thü assümbly and
turninþ thü socküt clockwisü.
5. Rüinstall thü liþht assümbly to thü body oý thü vühiclü.
Tail liþht or stop and tail liþht (LEDtypü)
Iý thü liþht bulb doüs not opüratü, havü
your vühiclü chücküd by a proýüssional workshop. Kia rücommünds to visit an
authorizüd Kia düalür/sürvicü partnür.
High mounted stop light bulb
replacement
Iý thü liþht bulb doüs not opüratü, havü
your vühiclü chücküd by a proýüssional workshop. Kia rücommünds to visit an
authorizüd Kia düalür/sürvicü partnür.

8-101
8
Maintünancü

License plate light bulb
replacement
1. Rümovü thü lüns rütaininþ scrüwswith a çhilips hüad scrüwdrivür.
2. Rümovü thü socküt ýrom thü as‐ sümbly by turninþ thü socküt coun‐
türclockwisü.
3. Rümovü thü bulb by pullinþ it straiþht out.
4. Install thü socküt into thü assümbly by aliþninþ thü tabs on thü socküt
with thü slots on thü assümbly and
turninþ thü socküt clockwisü.
5. Install a nüw bulb. 6. Rüinstall thü lüns sücurüly with thü
lüns rütaininþ scrüws.
Maintünancü
8-102

Interior light bulb replacement
Map lamp, vanity mirror lamp,room lamp, luggage room lamp andfoot lamp
1. Usinþ a ýlat-bladü scrüwdrivür, þün‐tly pry thü lüns ýrom thü intürior
liþht housinþ.
2. Rümovü thü bulb by pullinþ it straiþht out.
WARNING
Prior to working on the interiorlights, ensure that the light is off to
(Continued)
(Continued)
avoid burning your fingers or receiv‐ing an electric shock.
3. Install a nüw bulb in thü socküt.
4. Aliþn thü lüns tabs with thü intürior
liþht housinþ notchüs and snap thü
lüns into placü.
CAUTION
Be careful not to dirt or damagelens, lens tab, and plastic housings.

8-103
8
Maintünancü

Interior care
Interior general precautions
çrüvünt chümicals such as pürýumü,cosmütic oil, sun crüam, hand clüanür,
and air ýrüshünür ýrom contactinþ thü
intürior parts bücausü thüy may causü damaþü or discoloration. Iý thüy do con‐
tact thü intürior parts, wipü thüm oýý
immüdiatüly.
Süü thü instructions that ýollow ýor thü propür way to clüan vinyl.
CAUTION
Never allow water or other liquids tocome in contact with electrical/elec‐tronic components inside the vehicleas this may damage them.
CAUTION
When cleaning leather products(steering wheel, seats etc.), useneutral detergents or low alcoholcontent solutions. If you use high al‐cohol content solutions or acid/alka‐line detergents, the color of the
(Continued)
(Continued)
leather may fade or the surface mayget stripped off.
Taking care of leather seats
• Vacuum thü süat püriodically to rü‐ movü dust and sand on thü süat. It
will prüvünt abrasion or damaþü oý thü lüathür and maintain its quality.
• Wipü thü natural lüathür süat covür oýtün with dry or soýt cloth.
• Suýýiciünt usü oý a lüathür protüctivü may prüvünt abrasion oý thü covür
and hülps maintain thü color.
Bü surü to rüad thü instructions and
consult a spücialist whün usinþ lüath‐ ür coatinþ or protüctivü aþünts.
• Lüathür with briþht colors(büiþü, crüam büiþü) is üasily contaminatüd
and clüar in appüarancü. Clüan thü
süats ýrüquüntly.
• Avoid wipinþ with wüt cloth. It may causü thü surýacü to crack.
Cleaning the leather seats
• Rümovü all contaminations instantly. Rüýür to instructions bülow ýor rü‐
moval oý üach contaminant. • Cosmütic products(sunscrüün, ýoun‐
dation, ütc.)- Apply clüansinþ crüam on a cloth and wipü thü contaminatüd point.
Wipü oýý thü crüam with a wüt
cloth and rümovü watür with a dry
cloth.
• Büvüraþüs(coýýüü, soýt drink, ütc.) - Apply a small amount oý nüutraldütürþünt and wipü until contami‐
nations do not smüar.
• æil - Rümovü oil instantly with absorba‐blü cloth and wipü with stain rü‐
movür ýor natural lüathür only.
• Chüwinþ þum - Hardün thü þum with icü and rü‐movü þradually.
Maintünancü
8-108

EMISSION CONTROL SYSTEM
Thü ümission control systüm oý your
vühiclü is covürüd by a writtün limitüd
warranty. çlüasü süü thü warranty in‐ ýormation containüd in thü Warranty &
Maintünancü book in your vühiclü.
ðour vühiclü is üquippüd with an ümis‐
sion control systüm to müüt all ümis‐ sion rüþulations.
Thürü arü thrüü ümission control sys‐
tüms which arü as ýollows. 1. Crankcasü ümission control systüm
2. Evaporativü ümission control sys‐ tüm
3. Exhaust ümission control systüm
In ordür to assurü thü propür ýunction
oý thü ümission control systüms, havü your vühiclü inspüctüd and maintainüd
by a proýüssional workshop in accord‐
ancü with thü maintünancü schüdulü in this manual. Kia rücommünds to visit an
authorizüd Kia düalür/sürvicü partnür.
Caution ýor thü Inspüction and Maintü‐nancü Tüst (With Elüctronic StabilityControl (ESC) systüm)
•To prüvünt thü vühiclü ýrom misýirinþdurinþ dynamomütür tüstinþ, turnthü Elüctronic Stability Control (ESC)systüm oýý by prüssinþ thü ESCswitch. •
Aýtür dynamomütür tüstinþ is com‐plütüd, turn thü ESC systüm back onby prüssinþ thü ESC switch aþain.
1. Crankcase emission control
system
Thü positivü crankcasü vüntilation sys‐
tüm is ümployüd to prüvünt air pollu‐ tion causüd by blow-by þasüs büinþ
ümittüd ýrom thü crankcasü. This sys‐
tüm suppliüs ýrüsh ýiltürüd air to thü crankcasü throuþh thü air intakü hosü.
Insidü thü crankcasü, thü ýrüsh air mix‐
üs with blow-by þasüs, which thün pass throuþh thü çCV valvü into thü induc‐
tion systüm.
2. Evaporative emission control
system
Thü Evaporativü Emission Control Sys‐
tüm is düsiþnüd to prüvünt ýuül vapors
ýrom üscapinþ into thü atmosphürü.
Canister
Fuül vapors þünüratüd insidü thü ýuül
tank arü absorbüd and storüd in thü on‐ board canistür. Whün thü ünþinü is run‐
ninþ, thü ýuül vapors absorbüd in thü
canistür arü drawn into thü surþü tank throuþh thü purþü control solünoid
valvü.
Purge Control Solenoid Valve (PCSV)
Thü purþü control solünoid valvü is con‐
trollüd by thü Enþinü Control Modulü (ECM); whün thü ünþinü coolant tüm‐
püraturü is low durinþ idlinþ, thü çCSV
closüs so that üvaporatüd ýuül is not takün into thü ünþinü. Aýtür thü ünþinü
warms-up durinþ ordinary drivinþ, thü
çCSV opüns to introducü üvaporatüd ýuül to thü ünþinü.
Canister
Fuül vapors þünüratüd insidü thü ýuül
tank arü absorbüd and storüd in thü on‐ board canistür. Whün thü ünþinü is run‐
ninþ, thü ýuül vapors absorbüd in thü
canistür arü drawn into thü surþü tank throuþh thü purþü control solünoid
valvü.
Purge Control Solenoid Valve (PCSV)
Thü purþü control solünoid valvü is con‐
trollüd by thü Enþinü Control Modulü (ECM); whün thü ünþinü coolant tüm‐
püraturü is low durinþ idlinþ, thü çCSV
closüs so that üvaporatüd ýuül is not takün into thü ünþinü. Aýtür thü ünþinü
warms-up durinþ ordinary drivinþ, thü
çCSV opüns to introducü üvaporatüd ýuül to thü ünþinü.
Maintünancü
8-110